| [1] |
Zheng-Hong Liu, Ying Han, Jia-Peng Sun, Ming-Kun Jiang, Ying Song, Guo-Qing Zu, Xu Ran.
A Novel Cu-Modified 20Cr Lean Duplex Stainless Steel with Exceptional Combination of Mechanical Properties and Corrosion Resistance
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1361-1370.
|
| [2] |
Hongyang Zhang, Huihui Nie, Zhijian Li, Hongsheng Chen, Wei Liang, Liuwei Zheng.
Evolution of Microstructure and Mechanical Properties of AZ31 Sheets with Different Initial Microstructures During the Corrugated Wide Limit Alignment Process
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 1012-1028.
|
| [3] |
Jian Zang, Jianrong Liu, Qingjiang Wang, Haibing Tan, Bohua Zhang, Xiaolin Dong, Zibo Zhao.
Microstructure and Texture Evolution of Ti65 Alloy during Thermomechanical Processing
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(1): 107-120.
|
| [4] |
Yiqi Zhou, Decheng Kong, Ruixue Li, Xing He, Chaofang Dong.
Corrosion of Duplex Stainless Steel Manufactured by Laser Powder Bed Fusion: A Critical Review
[J]. Acta Metallurgica Sinica (English Letters), 2024, 37(4): 587-606.
|
| [5] |
Zhenghong Liu, Zhigang Wu, Ying Han, Xiaolei Song, Guoqing Zu, Weiwei Zhu, Xu Ran.
Combination of High Yield Strength and Improved Ductility of 21Cr Lean Duplex Stainless Steel by Tailoring Cold Deformation and Low-Temperature Short-Term Aging
[J]. Acta Metallurgica Sinica (English Letters), 2024, 37(4): 695-702.
|
| [6] |
Guo-Dong Liu, Xue-Mei Luo, Ji-Peng Zou, Bin Zhang, Guang-Ping Zhang.
Effects of Grain Size and Cryogenic Temperature on the Strain Hardening Behavior of VCoNi Medium-Entropy Alloys
[J]. Acta Metallurgica Sinica (English Letters), 2023, 36(6): 973-986.
|
| [7] |
Zhilong Dong, Xue-Fang Xie, Jingwen Li, Yu Wan.
Thickness-Dependent Microstructure and its Effect on Anisotropic Mechanical Properties of Duplex Stainless Steel 2205 Multi-pass Welded Joints
[J]. Acta Metallurgica Sinica (English Letters), 2023, 36(11): 1883-1892.
|
| [8] |
Ming-Jie Zhao, Liang Huang, Chang-Min Li, Jia-Hui Xu, Xu-Yang Li, Jian-Jun Li, Peng-Chuan Li, Chao-Yuan Sun.
Investigation and Modeling of Austenite Grain Evolution for a Typical High-strength Low-alloy Steel during Soaking and Deformation Process
[J]. Acta Metallurgica Sinica (English Letters), 2022, 35(6): 996-1010.
|
| [9] |
Yong Yang, Xue-Ling Hou, Mou-Cheng Li.
Effect of Vacuum Pressure on the Initiation and Propagation of Pitting Corrosion of 2205 Duplex Stainless Steel in Concentrated Seawater
[J]. Acta Metallurgica Sinica (English Letters), 2022, 35(6): 1023-1033.
|
| [10] |
H. R. Rezaei Ashtiani, A. A. Shayanpoor.
Effect of Initial Grain Size on the Hot Deformation Behavior and Microstructural Evolution of Pure Copper
[J]. Acta Metallurgica Sinica (English Letters), 2022, 35(4): 662-678.
|
| [11] |
Shouqing Zhang, Xiaofeng Hu, Haichang Jiang, Lijian Rong.
Effect of Cooling Rate on Microstructure and Effective Grain Size for a Ni-Cr-Mo-B High-Strength Steel
[J]. Acta Metallurgica Sinica (English Letters), 2022, 35(11): 1862-1872.
|
| [12] |
Jie Cui, Tianjiao Luo, Yingju Li, Xiaohui Feng, Qiuyan Huang, Yuansheng Yang.
Fluidity, Microstructure, and Tensile Properties of Sub-rapidly Solidified Mg-6Al-4Zn-xSn (x = 0, 0.6, 1.2, 1.8) Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2021, 34(9): 1265-1276.
|
| [13] |
Hui-Hu Lu, Xing-Quan Shen, Wei Liang.
Effect of Grain Size on the Precipitation Behaviour in Super-Ferritic Stainless Steels During a Long-Term Ageing
[J]. Acta Metallurgica Sinica (English Letters), 2021, 34(9): 1285-1295.
|
| [14] |
Leipeng Duan, Kang Wang, Engang Wang, Peng Jia.
Precipitation of α-Fe from Fe84-xSi4B12+x (x = 1, 3) Amorphous Alloys Under High Magnetic Field Annealing
[J]. Acta Metallurgica Sinica (English Letters), 2021, 34(8): 1163-1172.
|
| [15] |
Xiaohui Shi, Zuhan Cao, Zhiyuan Fan, Ruipeng Guo, Junwei Qiao.
Probing into the Yield Plateau Phenomenon in Commercially Pure Titanium During Tensile Tests
[J]. Acta Metallurgica Sinica (English Letters), 2021, 34(5): 701-709.
|
WeChat
