PREPARATION AND ITS WEAR RESISITANCE OF WC-Co/NiCrBSi METALLURGICAL BONDED COMPOSITE COATING

Abstract

Abstract: A WC-Co/NiCrBSi composite coating was made on 42CrMo steel through vacuum brazing technology. The effects of cobalt and WC-17Co content on the properties of the coating were analyzed. The abrasive wear resistance decreased as the cobalt content increased. The tensile strength of the coating increased with the increase of the WC-17Co content and the maximum strength approaches to 184MPa. The abrusive property of the composite coating is better than that of the WC-17Co/NiCrBSi flame overlaying and CoCrW overlaying.

Key words: composite coating, brazing, bonding strength, wear resistance

S.P. Lu; Y.Guo and L.S. Chen(Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110015, China). PREPARATION AND ITS WEAR RESISITANCE OF WC-Co/NiCrBSi METALLURGICAL BONDED COMPOSITE COATING[J]. Acta Metallurgica Sinica (English Letters), 2000, 13(3): 857-861.

[1]	Xuhui Liu, Zijin Xiao, Yang Yuan, Qihong Huang, Kaiwei Tang, Yilong Dai, Dechuang Zhang, Jia She, Feng Peng, Fugang Qi, Xiaoping Ouyang. Corrosion-resistant and bioactive FeMn-CaP-Col@CS coating on magnesium alloy for orthopedic implants: Fabrication and characterization [J]. Metals Advances, 2026, 39(1): 1-12.
[2]	Meisa Zhou, Kun-Ming Pan, Xiao-Ye Zhou, Shulong Ye, Shaojie Du, Hong-Hui Wu. Surface Wear Behavior of Nanograined NbMoTaW Refractory High-Entropy Alloys via Nano-scratching Simulations [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 946-960.
[3]	Yifei Gao, Peng Zhang, Pan Ren, Yingfei Yang, Guofeng Han, Wenbo Du, Wei Li, Qiwei Wang. Effect of CeO₂ on the H₂O/NaCl-Induced Corrosion Behavior of Ni-Co Coating at 650 °C [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(4): 672-690.
[4]	Lingxiao Du, Hang Ding, Yun Xie, Li Ji, Wanbin Chen, Yunze Xu. Effect of Laser Energy Density on Microstructures and Properties of Additively Manufactured AlCoCrFeNi_2.1 Eutectic High-Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(2): 233-244.
[5]	Farhad Mohsenifar, Hadi Ebrahimifar, Ahmad Irannejad. Applying the Protective Mn-Co-La₂O₃ Coating on Crofer 22 APU Ferritic Stainless Steel Used as Solid Oxide Fuel Cell Interconnects [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(5): 872-888.
[6]	J. Sharath Kumar, Rakesh Kumar, Rajeev Verma. Surface Modification Aspects for Improving Biomedical Properties in Implants: A Review [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(2): 213-241.
[7]	Jiafen Song, Wei Guo, Shiming Xu, Ding Hao, Yajie Du, Jiangtao Xiong, Jinglong Li. Interfacial Microstructure Evolution and Mechanical Properties of TC4/MgAl₂O₄ Joints Brazed with Ti-Zr-Cu-Ni Filler Metal [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(12): 2057-2067.
[8]	Yong Wen, Yan-Fei Wang, Hao Ran, Wei Wei, Jun-Ming Zhang, Chong-Xiang Huang. Improving the Mechanical and Tribological Properties of NiTi Alloys by Combining Cryo-Rolling and Post-Annealing [J]. Acta Metallurgica Sinica (English Letters), 2022, 35(2): 317-325.
[9]	Chengxu Wang, Wei Chen, Minghui Chen, Demin Chen, Fuhui Wang. Ni/AlN Composite Coating for Corrosion and Elements Interdiffusion Resistance in Molten Fluoride Salts System [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(12): 1704-1714.
[10]	Yunhai Su, Xuewei Liang, Yunqi Liu, Zhiyong Dai. Effect of Ti Addition on the Microstructure and Property of FeAlCuCrNiMo_0.6 High-Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 957-967.
[11]	Juan Liu, Yuze Wu, Lin Wang, Hui Wang, Charlie Kong, Alexander Pesin, Alexander P. Zhilyaev, Hailiang Yu. Fabrication and Characterization of High-Bonding-Strength Al/Ti/Al-Laminated Composites via Cryorolling [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 871-880.
[12]	Jin Hyuk Choi, Gobinda Gyawali, Dhani Ram Dhakal, Bhupendra Joshi, Soo Wohn Lee. Electrodeposited Ni-W-TiC Composite Coatings: Effect of TiC Reinforcement on Microstructural and Tribological Properties [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 573-582.
[13]	Yang Zhou, Shujin Chen, Di Wang, Ruifeng Li, Bin Liu, Juan Pu, Zhidong Yang. Effect of Shoulder Diameter on the Force Generation, Microstructure and Mechanical Properties of Friction Stir-Brazed Aluminium Alloy and Copper with Ultrahigh Rotation Speed [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(1): 154-164.
[14]	Wen-Bo Li, Lan-Lan Liu, Ying-Fei Yang, Sheng-Long Zhu, Fu-Hui Wang. Hot Corrosion Behavior of SiO₂-Al₂O₃-Glass Composite Coating on Ti-47Al-2Cr-2Nb Alloy: Diffusion Barrier for S and Cl [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(5): 599-606.
[15]	Sabbah Ataya, Naser A. Alsaleh, Mohamed M. El-Sayed Seleman. Strength and Wear Behavior of Mg Alloy AE42 Reinforced with Carbon Short Fibers [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 31-40.

PREPARATION AND ITS WEAR RESISITANCE OF WC-Co/NiCrBSi METALLURGICAL BONDED COMPOSITE COATING

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments