FEM ANALYSIS OF THERMAL STRESSES IN GRADIENT THERMAL BARRIER COATINGS PRODUCED BY EB-PVD

Acta Metallurgica Sinica (English Letters) ›› 2001, Vol. 14 ›› Issue (6): 493-496 .

• Research Articles • Previous Articles Next Articles

FEM ANALYSIS OF THERMAL STRESSES IN GRADIENT THERMAL BARRIER COATINGS PRODUCED BY EB-PVD

H.B. Guo

Department of Materials Science & Engineering, Beijing University of Aeronautics andAstronautics, Beijiug 100083, China

Received:1900-01-01 Revised:1900-01-01 Online:2001-12-25 Published:2009-10-10
Contact: H.B. Guo

Abstract

Abstract: Gradient thermal barrier coatings (GTBCs) produced by co-deposition of mixtures ofAl-Al2 O3-YSZ onto metallic bond coat exhibited longer lifetimes than the two-layeredTBCs. The finite element method (FEM) numerical models were used to investigatestress and strain states in the GTBCs and traditional two-layered TBCs as they cooledto 750℃ from a stress-free state at 850℃.

Key words: EB-PVD, gradient thermal barrier coating, finite element method

H.B. Guo. FEM ANALYSIS OF THERMAL STRESSES IN GRADIENT THERMAL BARRIER COATINGS PRODUCED BY EB-PVD[J]. Acta Metallurgica Sinica (English Letters), 2001, 14(6): 493-496 .

[1]	Yuhua Li, Yuxin He, Qian Zhang, Chuanwei Zhang, Libin Niu, Yujing Liu, Saisai Zhu, Pei Wang. Preparation of High-Strength Pure Titanium by Powder Metallurgy: One-Step Pressing Versus Multi-Step Pressing Technique [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(10): 1839-1852.
[2]	Chunni Jia, Gang Shen, Wenxiong Chen, Baojia Hu, Chengwu Zheng, Dianzhong Li. Mesoscopic Analysis of Deformation Heterogeneity and Recrystallization Microstructures of a Dual-Phase Steel Using a Coupled Simulation Approach [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(6): 777-788.
[3]	Kang-Xin Chen, Hou-Fa Shen. Numerical Simulation of Macrosegregation Caused by Thermal-Solutal Convection and Solidification Shrinkage Using ALE Model [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(11): 1396-1406.
[4]	Shu-Ming Wang, Jiang-Shan Li, Yan-Xin Wang, Xiao-Fang Zhang, Qing Ye. Thermal Shock Behavior Analysis of Tungsten-Armored Plasma-Facing Components for Future Fusion Reactor [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 515-522.
[5]	Zhao-Yang Jin, Nan-Nan Li, Kai Yan, Jing-Xin Chen, Dong-Lai Wei, Zhen-Shan Cui. Controlling Flow Instability in Straight Spur Gear Forging Using Numerical Simulation and Response Surface Method [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(1): 82-96.
[6]	Yun-Long Wang, Kai-Kun Wang, Yu-Wei Wang, Guang-Chen Li. Experiment and Simulation for Rolling of Diamond-Cu Composites [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(8): 791-800.
[7]	Lasko Galina, Weber Ulrich, Schmauder Siegfried. Finite Element Simulations of Crack Propagation in Al₂O₃/6061Al Composites [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(5): 853-861.
[8]	Zhenyi Huang, Qi Shi, Fuqiang Chen, Yunfeng Shi. FEM Simulation of the Hydrogen Diffusion in X80 Pipeline Steel During Stacking for Slow Cooling [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(3): 416-421.
[9]	Zhuanzhao YANG, Daoxin LIU,Xiaohua ZHANG. Finite Element Method Analysis of the Stress for Line Pipe with Corrode Groove During Outdoor Storage [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(2): 188-198.
[10]	Yixuan TAN,Saiyi LI. Finite element simulations of deformation behavior in equal channel angular pressing using a rotated die [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(5): 357-364.
[11]	Masaaki TABUCHI, Hiromichi HONGO. Evaluation of microstructure and creep damage in high-Cr ferritic steel welds [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(3): 225-234.
[12]	Jianping TAN, Guozhen WANG, Fuzhen XUAN and Shan-Tung TU. Creep crack growth in a Cr-Mo-V type steel: experimental observation and prediction [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(2): 81-91.
[13]	Fengli SUI,Liqing CHEN,Xianghua LIU,Lintao WANG,Wei LI. Temperature field analysis and its application in hot continuous rolling of Inconel 718 superalloy [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(2): 81-90.
[14]	Fengping YANG,Qin SUN,Wei HU. Yield criterions of metal plasticity in different stress states [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(2): 123-130.
[15]	Y.X. Hu, Z.Q. Yao. FEM simulation of residual stresses induced by laser shock with overlapping laser spots [J]. Acta Metallurgica Sinica (English Letters), 2008, 21(2): 125-132 .

FEM ANALYSIS OF THERMAL STRESSES IN GRADIENT THERMAL BARRIER COATINGS PRODUCED BY EB-PVD

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments