ALLOYING BEHAVIOUR OF Ca IN STEEL 58CrV

Abstract

Abstract: Effect of Ca on hardenability and CCT diagram of steel 58CrV has been investigated by means of end-quenching and thermal expansion.An addition of 0.006 wt-%Ca to the steel may improve the hardenability,reduce the critical cooling rate of transformation of pearlite or bainite under continuous cooling and increase the M_s.AES analysis showed that Ca segre- gates markedly along austenitie grain boundaries,and accelecrates the segregation of C,Cr and Si.It is believed that besides towards deoxidizing and desulphurizing as well as improving sulphide morphology,a trace of Ca in steel 58CrV behaves towards microalloying.

Key words: Ca, steel 58CrV microalloying, hardenability, CCT diagram

LU Feng CAO Fengyu LI Chengji University of Science and Technology Beijing,Beijing,ChinaZHANG Yongxiang CHEN Yonggang Beijing Institute of Machine Tools,Beijing,China Faculty of Metallograph,University of Science and technology Beijing,Beijing 100083,China. ALLOYING BEHAVIOUR OF Ca IN STEEL 58CrV[J]. Acta Metallurgica Sinica (English Letters), 1992, 5(6): 449-453.

[1]	Shang Zhao, Zhaolin Wang, Mingliang Wang, Zeyu Ding, Yiping Lu. A critical review of advances and application prospects of soft magnetic high entropy alloys [J]. Metals Advances, 2026, 40(2): 1-7.
[2]	Wei-Peng Chen, Jia-Qi Pei, Hua Hou, Yu-Hong Zhao. Phase-field simulation of α-Mg dendrite growth in magnesium alloys: A review [J]. Metals Advances, 2026, 40(2): 48-61.
[3]	Zijian Zhao, Junkang Chen, Hu Zhou, Biao Hu, Chunfeng Meng, Aihua Yuan, Yanxin Qiao. Engineering Mn-N_x sites on nitrogen-doped carbon spheres as efficient bifunctional electrocatalysts for zinc-air batteries [J]. Metals Advances, 2026, 40(2): 62-70.
[4]	Xinqi Ji, Yue Zhang, Wenhan Jin, Xin Qi. A strategy on the consistency of tensile strength of friction stir lap welding joint based on the same peak temperature [J]. Metals Advances, 2026, 40(2): 78-87.
[5]	Zhi-Gang Qi, Qi Chen, Zhao-Xuan Wang, Zi-Wei Guo, Zi-Qi Song, Yan-Xu Li, Xin-Long Lu, Mehran-Khan Alam, Su-Juan Cheng, Bo-Xuan Cao, Xi-Hua Zhang, Wei-Min Wang. Achieving integrated soft magnetic-catalytic functionalities in Fe-based amorphous ribbons via glassy matrix and self-spalling oxide layer [J]. Metals Advances, 2026, 40(2): 88-100.
[6]	Lei Qin, Shengfeng Zhou, Jianbo Jin, Huan Yang, Kunmao Li, Cheng Deng, Yujie Yuan, Seyed Reza Elmi Hosseini, Lai-Chang Zhang. Effect of molybdenum content on the microstructure and tribological properties of Ti-Nb-Cu alloys produced by LPBF additive manufacturing [J]. Metals Advances, 2026, 39(1): 13-25.
[7]	X.L. Wang, J.Y. Li, Q.S. Mei. Recent progress in Zn matrix composites for biomedical applications [J]. Metals Advances, 2026, 39(1): 26-37.
[8]	Kunmao Li, Shengfeng Zhou, Jing Liu, Feng Yang, Chengliang Yang. A review on the biomedical Ti-Cu alloys: Design, preparation, microstructure and properties [J]. Metals Advances, 2026, 39(1): 47-67.
[9]	Eman Hassna, Yuxin Huang, Tingting Yan. Biodegradable metals for cardiovascular and orthopaedic implants: A comparative review of magnesium, iron and zinc [J]. Metals Advances, 2026, 39(1): 68-82.
[10]	Shuai Hao, Xiang-Mei Wen, Jun Cheng, Xue-Yan Yao, Wei-Ying Huang, Rui-Feng Li, Liang-Yu Chen. Tailoring corrosion resistance of laser powder bed fusion produced Ti-6Al-4V via heat treatment at 700 °C in potential biomedical applications: Microstructural evolution and electrochemical behavior [J]. Metals Advances, 2026, 39(1): 83-94.
[11]	Author links open overlay panelXiaodong Yang, Chang Liu, Lechun Xie. Surface engineering of medical titanium alloy: A review [J]. Metals Advances, 2026, 39(1): 95-116.
[12]	Yuanyuan Feng, Jianchao Pang, Xiaoyuan Teng, Chenglu Zou, Jingjing Liang, Yuping Zhu, Shouxin Li, Jinguo Li, Zhefeng Zhang. Quasi-in-situ EBSD Study on the Microstructure and Tensile Properties of Selective Laser Melted Inconel 718 Alloy Processed by Different Heat Treatments [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1499-1512.
[13]	Shuyi Ren, Jiao Li, Kai Wu, Xiaoge Li, Yaqiang Wang, Jinyu Zhang, Gang Liu, Jun Sun. Thermal Stability and Mechanical Properties of Nanotwinned Ni-W Alloyed Films [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1570-1582.
[14]	Hongliang Liu, Jingpei Nie, Liwei Bai, Yujing Fu, Xiaoguang Yang, Zhen Chang, Xue Zhang, Ying Li. Preparation and Anti-Oxidation Mechanism of an Inventive Preprocessing Method for Press-Hardened Steels [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1604-1612.
[15]	Tongzhao Gong, Shuting Cao, Weiye Hao, Weiqi Fan, Yun Chen, Xing-Qiu Chen, Dianzhong Li. Modelling Microsegregation of Binary Alloy During Solidification [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1628-1636.

ALLOYING BEHAVIOUR OF Ca IN STEEL 58CrV

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments