IN SITU OBSERVATION OF DEFORMATION AND FRACTURE FOR SUPERALLOY GH169 UNDER COMBINED FATIGUE-CREEP ACTION

Abstract

Abstract: In Situ observation of deformation and fracture for superalloy GH169 under combined fatigue-creep action is made by using high temperature metalloscope,it is shown that under the test conditions the deformution takes place by merely of slipping,twinning and grain houndary sliding,and the mode of failure depends on the microstructure of specimen. lntergranular cracks arise.from W-type voids produced by the stress concentration at triple point which could not be relaxed by the interior deformation of grains and the local deformathm region along grain bounaries.And the crack propagation mechanism is the nucleation,growth and linkage of carities at the grain boundaries.Transgranular cracks form from deformatiom damages within the grain,and its propagation mechanism is shear rupture along the slip phme.

Key words: combined fatigue-creep action, deformation, fracture, superalloy GH169

TIAN Changsheng WANG Minsheng HOU Tiecui DANG Xin'an Northwestern Polytechnical University.Xi'an,China Associate Professor,Department of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China. IN SITU OBSERVATION OF DEFORMATION AND FRACTURE FOR SUPERALLOY GH169 UNDER COMBINED FATIGUE-CREEP ACTION[J]. Acta Metallurgica Sinica (English Letters), 1993, 6(2): 101-106.

[1]	Mengyao He, Shuhui Hao, Huichao Duan, Rui Zhang, Chuanyong Cui, Kui Du. Deformation twinning in a wrought Ni-base superalloy at intermediate temperatures [J]. Metals Advances, 2026, 40(2): 71-77.
[2]	Zhizhi Wang, Pei Liu, Jingyi Guo, Yiwen Yan, Aiqin Wang, Jingpei Xie. Excellent mechanical properties and biocompatibility of Ti-15Mo alloy via interstitial nitrogen atoms [J]. Metals Advances, 2026, 39(1): 38-46.
[3]	Yuanyuan Feng, Jianchao Pang, Xiaoyuan Teng, Chenglu Zou, Jingjing Liang, Yuping Zhu, Shouxin Li, Jinguo Li, Zhefeng Zhang. Quasi-in-situ EBSD Study on the Microstructure and Tensile Properties of Selective Laser Melted Inconel 718 Alloy Processed by Different Heat Treatments [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1499-1512.
[4]	B. M. Shi, Y. T. Pang, B. H. Shan, B. B. Wang, Y. Liu, P. Xue, J. F. Zhang, Y. N. Zan, Q. Z. Wang, B. L. Xiao, Z. Y. Ma. Microstructure Evolution and Fracture Behavior of (B₄C+Al₂O₃)/Al Friction Stir Welded Joints [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1513-1526.
[5]	Biao Zhang, Yuntian Du, Huishuang Jia, Yuanyi Zhou, Liguang Wang, Minghe Zhang, Yunli Feng, Weimin Gao, Ning Xu. Hot Deformation Behavior of CoNiV Medium-Entropy Alloy: Constitutive Model, Convolutional Neural Network, Hot Processing Map, and Microstructure Evolution [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1275-1292.
[6]	Qi Pan, Shichong Zhou, Fangxi Wang, Peng Chen. Cross Slip and Twinning During Torsion Around $a$-Axis of Magnesium [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1410-1420.
[7]	Yuanxiao Dai, Yue Zhang, Mei Wang, Jie Liu, Yaobo Hu, Bin Jiang. Three-Point Bending Deformation Behavior of a High Plasticity Mg-2.6Er-0.6Zr Alloy Sheet [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1109-1126.
[8]	Xu Yue, Zhiyong Chen, Wei Chen, Qingjiang Wang. Hot Deformation Behavior and Processing Map of a Novel Ti750s High-Temperature Titanium Alloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1174-1194.
[9]	Fei Yang, Canhui Wu, Ruifeng Li, Wenyi Huo, Liming Dong, Feng Fang. Strain-Induced Balancing of Strength and Electrical Conductivity in Cu-20 wt% Fe Alloy Wires: Effect of Drawing Strain [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1246-1260.
[10]	Wangjian Yu, Rui Hu, Guoqiang Shang, Xian Luo, Hong Wang. Correlation Mechanism Between Microstructure and Fatigue Crack Propagation Behavior of Ti-Mo-Cr-V-Nb-Al Titanium Alloys [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 981-1002.
[11]	Hongbin Liu, Zhenqiang Xing, Yitong Yang, Jingyu Pang, Wen Li, Zhengwang Zhu, Long Zhang, Aimin Wang, Haifeng Zhang, Hongwei Zhang. A Novel BCC/B2 Structural Nb₃₈Ti₃₅Al₁₅V₆Cr₄(TaHfMoW)₂ Refractory High-Entropy Alloy with Excellent Specific Yield Strength-Plasticity Synergy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 396-406.
[12]	Tianyi Zeng, Zirui Luo, Hao Chen, Wei Wang, Ke Yang. Flow Behavior and Dynamic Recrystallization Mechanism of CSS-42L Bearing Steel During Hot Compression Deformation [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 465-480.
[13]	Ji-Peng Yang, Hai-Feng Zhang, Hong-Chao Ji, Nan Jia. Molecular Dynamics Simulations of Micromechanical Behaviours for AlCoCrFeNi_2.1 High Entropy Alloy during Nanoindentation [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(2): 218-232.
[14]	Chenghao Liu, Wenchao Dong, Jian Sun, Shanping Lu. Effect of Precipitation Behavior and Deformation Twinning Evolution on the Mechanical Properties of 16Cr-25.5Ni-4.2Mo Superaustenitic Stainless Steel Weld Metals [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(2): 338-352.
[15]	Xiaolong Li, Chao Deng, Yunchang Xin, Xinde Huang, Guangjie Huang, Yao Cheng, Guodong Song. Quantification of Planar Mechanical Anisotropy in Dilute Mg-Zn-Gd Alloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2145-2164.

IN SITU OBSERVATION OF DEFORMATION AND FRACTURE FOR SUPERALLOY GH169 UNDER COMBINED FATIGUE-CREEP ACTION

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments