MICROSTRUCTURE AND COMPRESSIVE PROPERTIES OF REACTION-MILLED NiAl-10wt%TiC COMPOSITE

Abstract

Abstract: A NiAl- TiC composite with fine grains was prepared by mechanical alloying elemental powders and hot pressing in vacuum. The TiC particles with diameters of about 50-100nm preferentially distribute on grain boundaries and those with a mean size less than 10nm disperse uniformly throughout the grains. Compressive properties of the composite at room temperature show significantly improved ductility and strength over that of cast NiAl, and its high temperature strength is 3 to 4 times as large as that of cast NiAl.

Key words: intermetallics, composite, microstructure, mechanical property

L.Z ZHOU and J.T. GUO(Dept. of Superalloy and Special Casting, Institute of Metal Research, The Chinese Academy of Sciences,Shenyang 110015, China). MICROSTRUCTURE AND COMPRESSIVE PROPERTIES OF REACTION-MILLED NiAl-10wt%TiC COMPOSITE[J]. Acta Metallurgica Sinica (English Letters), 1998, 11(4): 281-285.

[1]	Shang Zhao, Zhaolin Wang, Mingliang Wang, Zeyu Ding, Yiping Lu. A critical review of advances and application prospects of soft magnetic high entropy alloys [J]. Metals Advances, 2026, 40(2): 1-7.
[2]	Wei-Peng Chen, Jia-Qi Pei, Hua Hou, Yu-Hong Zhao. Phase-field simulation of α-Mg dendrite growth in magnesium alloys: A review [J]. Metals Advances, 2026, 40(2): 48-61.
[3]	Peng Han, Wen Wang, Jun Cai, Jia Lin, Hubin Yang, Qianzhi Ma, Feng Gao, Ke Qiao, Fengming Qiang, Kuaishe Wang. Excellent superplasticity for lamellar microstructure in nugget of a double-sided friction stir welded Ti-4.5Al-3V-2Mo-2Fe alloy joint [J]. Metals Advances, 2026, 40(2): 110-123.
[4]	Xuhui Liu, Zijin Xiao, Yang Yuan, Qihong Huang, Kaiwei Tang, Yilong Dai, Dechuang Zhang, Jia She, Feng Peng, Fugang Qi, Xiaoping Ouyang. Corrosion-resistant and bioactive FeMn-CaP-Col@CS coating on magnesium alloy for orthopedic implants: Fabrication and characterization [J]. Metals Advances, 2026, 39(1): 1-12.
[5]	Lei Qin, Shengfeng Zhou, Jianbo Jin, Huan Yang, Kunmao Li, Cheng Deng, Yujie Yuan, Seyed Reza Elmi Hosseini, Lai-Chang Zhang. Effect of molybdenum content on the microstructure and tribological properties of Ti-Nb-Cu alloys produced by LPBF additive manufacturing [J]. Metals Advances, 2026, 39(1): 13-25.
[6]	X.L. Wang, J.Y. Li, Q.S. Mei. Recent progress in Zn matrix composites for biomedical applications [J]. Metals Advances, 2026, 39(1): 26-37.
[7]	Kunmao Li, Shengfeng Zhou, Jing Liu, Feng Yang, Chengliang Yang. A review on the biomedical Ti-Cu alloys: Design, preparation, microstructure and properties [J]. Metals Advances, 2026, 39(1): 47-67.
[8]	B. M. Shi, Y. T. Pang, B. H. Shan, B. B. Wang, Y. Liu, P. Xue, J. F. Zhang, Y. N. Zan, Q. Z. Wang, B. L. Xiao, Z. Y. Ma. Microstructure Evolution and Fracture Behavior of (B₄C+Al₂O₃)/Al Friction Stir Welded Joints [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1513-1526.
[9]	H. Q. Dai, N. Li, L. H. Wu, J. Wang, P. Xue, F. C. Liu, D. R. Ni, B. L. Xiao, Z. Y. Ma. Low-Temperature Superplastic Deformation Behavior of Bimodal Microstructure of Friction Stir Processed Ti-6Al-4V Alloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1559-1569.
[10]	Shuyi Ren, Jiao Li, Kai Wu, Xiaoge Li, Yaqiang Wang, Jinyu Zhang, Gang Liu, Jun Sun. Thermal Stability and Mechanical Properties of Nanotwinned Ni-W Alloyed Films [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1570-1582.
[11]	Xu Liu, Lan-Yun Yang, Li-Ting Zeng, Yun Peng, Chen-Xi Xu, Lei Li, Jia-Le Sun, Yang-Yang Chen, Liang Chen, Zhao-Hui Hou. A Self-Sacrifice Template Method to Produce FeS Encapsulated into N, S Co-Doped Carbon for Improved Lithium Storage Performance [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1637-1644.
[12]	F. S. Li, L. H. Wu, Y. Kan, H. B. Zhao, D. R. Ni, P. Xue, B. L. Xiao, Z. Y. Ma. Microstructure Evolution and Fracture Mechanisms in Electron Beam Welded Joint of Ti-6Al-4V ELI Alloy Ultra-thick Plates [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1317-1330.
[13]	Haoran Pang, Liwei Lu, Gongji Yang, Xiaojun Wang, Wen Wang, Hua Zhang, Yujuan Wu. Amelioration of Mechanical Properties of Rolled Mg-4.5Al-2.5Zn Alloy by Cryogenic Cycling Treatment [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1436-1452.
[14]	Yunlu Jiang, Lihui Wu, Dingrui Ni, Hongbo Zhao, Xu Han, Peng Xue, Bolv Xiao, Zongyi Ma. Effect of Post Weld Heat Treatment on Residual Stress and Mechanical Properties of 106 mm Thick TC4 Titanium Alloy Electron Beam Welded Joints [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1083-1094.
[15]	Qi Zhou, Yufeng Xia, Yu Duan, Baihao Zhang, Yuqiu Ye, Peitao Guo, Lu Li. Microstructure and Mechanical Properties of Yb-Containing AZ80 Cast Alloys [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1095-1108.

MICROSTRUCTURE AND COMPRESSIVE PROPERTIES OF REACTION-MILLED NiAl-10wt%TiC COMPOSITE

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments