Abstract: Titanium has been widely used as the implant materials of joint prostheses. This paper simulates the microstructures of the hot forged titanium knee joint component by physical modeling. Ti-6Al-4V ELI were deformed by GLEEBLE 2000 hot deforma- tion simulator in compression mode to determine the hot workability, in the range of 900 to 1100℃, with the strain rates between 0.05 to 5 s~(-1). Test results derived from specimens processed by on-cooling test and on-heating test were compared, thereby estimating the effect due to thermal history. The forging process of Ti-6Al-4V ELI tibial base plate of knee joint prostheses was design based on the workability data obtained.

Key words: physical modeling, hot workability, processing map, compression test, hot forging