| [1] |
Peng Liu, Hongliang Liu, Jun Liu, Chaoyun Yang, Hang Liu, Chengwu Zheng, Yikun Luan, Mingguang Li, Dianzhong Li.
Manipulating the texture configuration and formability of interstitial-free steels through low-oxygen rare earth addition
[J]. Metals Advances, 2026, 40(2): 101-109.
|
| [2] |
Xuhui Liu, Zijin Xiao, Yang Yuan, Qihong Huang, Kaiwei Tang, Yilong Dai, Dechuang Zhang, Jia She, Feng Peng, Fugang Qi, Xiaoping Ouyang.
Corrosion-resistant and bioactive FeMn-CaP-Col@CS coating on magnesium alloy for orthopedic implants: Fabrication and characterization
[J]. Metals Advances, 2026, 39(1): 1-12.
|
| [3] |
Author links open overlay panelXiaodong Yang, Chang Liu, Lechun Xie.
Surface engineering of medical titanium alloy: A review
[J]. Metals Advances, 2026, 39(1): 95-116.
|
| [4] |
Sen Ge, Ben Niu, Zhen-Hua Wang, Qian-Fu Pan, Chao-Hong Liu, Qing Wang.
Recrystallization Behavior and Mechanical Property of a Medium-Si 12%Cr Reduced Activation Ferritic/Martensitic Steel Cladding Tube During the Manufacture
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1385-1396.
|
| [5] |
Yunhu Ding, Yingpeng Li, Hongfang Liu, Wenhao Wang, Yijun Wei, Haitao Duan, Wen Zhan.
Corrosion Evolution Behavior of Ti/Zr/Oligomeric Epoxy Silane Composite Chemical Conversion Coatings on Multi-metals
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 889-903.
|
| [6] |
Chenzhi Xing, Ming-Hsien Lee, Gongwang Cao, Yuwei Liu, Quanzhong Guo, Zhenyao Wang, Chuan Wang.
Discoloration Process of Minted Copper-Nickel Alloys in Chloride Ion-Containing Environments: Experimental and DFT Research
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 925-945.
|
| [7] |
Meisa Zhou, Kun-Ming Pan, Xiao-Ye Zhou, Shulong Ye, Shaojie Du, Hong-Hui Wu.
Surface Wear Behavior of Nanograined NbMoTaW Refractory High-Entropy Alloys via Nano-scratching Simulations
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 946-960.
|
| [8] |
Hongyang Zhang, Huihui Nie, Zhijian Li, Hongsheng Chen, Wei Liang, Liuwei Zheng.
Evolution of Microstructure and Mechanical Properties of AZ31 Sheets with Different Initial Microstructures During the Corrugated Wide Limit Alignment Process
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 1012-1028.
|
| [9] |
X. X. Zhang, E. Walz, A. Langebeck, J. Rebelo Kornmeier, A. Kriele, V. Luzin, M. Adveev, A. Bohlen, M. Hofmann.
Macroscopic and Microscopic Residual Stresses in Nickel-Aluminum Bronze Matrix Composite Surface Deposits Manufactured via Laser Melt Injection
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(4): 570-586.
|
| [10] |
Longfei Ma, Yingzhengsheng Huang, Wei Quan, Qiang Zheng, Juan Du.
Improved Coercivity in Cu-Doped SmCo5 Nanocomposite Powders Obtained by Low Temperature Annealing
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(4): 587-596.
|
| [11] |
Yifei Gao, Peng Zhang, Pan Ren, Yingfei Yang, Guofeng Han, Wenbo Du, Wei Li, Qiwei Wang.
Effect of CeO2 on the H2O/NaCl-Induced Corrosion Behavior of Ni-Co Coating at 650 °C
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(4): 672-690.
|
| [12] |
Tianyi Zeng, Zirui Luo, Hao Chen, Wei Wang, Ke Yang.
Flow Behavior and Dynamic Recrystallization Mechanism of CSS-42L Bearing Steel During Hot Compression Deformation
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 465-480.
|
| [13] |
Liping Wu, Junhua Dong, Xianfei Zheng, Zhongying Wang, Xiaoying Sun, Xiuling Shang, Wei Ke, Changgang Wang.
Effect of K2HPO4 Concentration on the Formation, Structure, Composition and Protectiveness of Conversion Coating Deposited on AZ31 Magnesium Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 481-496.
|
| [14] |
Nafiseh Mollaei, Seyed Mahmood Fatemi, Mohammad Reza Aboutalebi, Seyed Hossein Razavi, Wiktor Bednarczyk.
Microstructure, Texture, Mechanical Properties, and Corrosion Behavior of Biodegradable Zn-0.2Mg Alloy Processed by Multi-Directional Forging
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 507-525.
|
| [15] |
Yingying Fu, Zhihao Yao, Yang Chen, Hongying Wang, Yajing Li, Jianxin Dong.
Progress in the Deposition Mechanisms and Key Performance Evaluation of Thermal Barrier Coatings for Turbine Blades: A Review
[J]. Acta Metallurgica Sinica (English Letters), 2025, 38(2): 177-204.
|