Machine Learning-Based Comprehensive Prediction Model for L12 Phase-Strengthened Fe-Co-Ni-Based High-Entropy Alloys

doi:10.1007/s40195-024-01774-1

Abstract

Abstract:

L1₂ phase-strengthened Fe-Co-Ni-based high-entropy alloys (HEAs) have attracted considerable attention due to their excellent mechanical properties. Improving the properties of HEAs through conventional experimental methods is costly. Therefore, a new method is needed to predict the properties of alloys quickly and accurately. In this study, a comprehensive prediction model for L1₂ phase-strengthened Fe-Co-Ni-based HEAs was developed. The existence of the L1₂ phase in the HEAs was first predicted. A link was then established between the microstructure (L1₂ phase volume fraction) and properties (hardness) of HEAs, and comprehensive prediction was performed. Finally, two mutually exclusive properties (strength and plasticity) of HEAs were coupled and co-optimized. The Shapley additive explained algorithm was also used to interpret the contribution of each model feature to the comprehensive properties of HEAs. The vast compositional and process search space of HEAs was progressively screened in three stages by applying different prediction models. Finally, four HEAs were screened from hundreds of thousands of possible candidate groups, and the prediction results were verified by experiments. In this work, L1₂ phase-strengthened Fe-Co-Ni-based HEAs with high strength and plasticity were successfully designed. The new method presented herein has a great cost advantage over traditional experimental methods. It is also expected to be applied in the design of HEAs with various excellent properties or to explore the potential factors affecting the microstructure/properties of alloys.

Key words: High-entropy alloy, Machine learning, L1₂ phase, Comprehensive prediction, Shapley additive explanation (SHAP)

Xin Li, Chenglei Wang, Laichang Zhang, Shengfeng Zhou, Jian Huang, Mengyao Gao, Chong Liu, Mei Huang, Yatao Zhu, Hu Chen, Jingya Zhang, Zhujiang Tan. Machine Learning-Based Comprehensive Prediction Model for L1₂ Phase-Strengthened Fe-Co-Ni-Based High-Entropy Alloys[J]. Acta Metallurgica Sinica (English Letters), 2024, 37(11): 1858-1874.

Figures/Tables 18

Fig. 1 Schematic diagram of a comprehensive prediction system for L12 phase-strengthened Fe-Co-Ni-based HEAs

Table 1 Features and their numbers of data

Number	Feature	Number	Feature
1	Fe content (at.%)	10	Homogenization temperature (k)
2	Co content (at.%)	11	Homogenization time (h)
3	Ni content (at.%)	12	Cold rolling (%)
4	Al content (at.%)	13	First aging temperature (k)
5	Ti content (at.%)	14	First aging time (h)
6	Cr content (at.%)	15	Second aging temperature (k)
7	Cu content (at.%)	16	Second aging time (h)
8	Mn content (at.%)	17	Water cooling
9	Nb content (at.%)	18	Air cooling
		19	Furnace cooling

Fig. 2 Performance and SHAP significance plots of L12 phase existence prediction models: a, c, e ROC curves of different predictive models, b, d, f ROC curves of different prediction models after screening out some useless features, g importance of features of predictive models

Fig. 3 Heat map of Pearson's correlation coefficient set between different features of EWM-based database for comprehensive prediction of L12 phase volume fraction and hardness of HEAs

Fig. 4 Predictive effectiveness of an combined prediction model for L12 phase volume fraction and hardness on test and training datasets: a-d test dataset, e-h training dataset, i distribution of SHAP values for different input features of the combined L12 phase volume fraction and hardness prediction model

Fig. 5 R2 and RMSE values of EWM-based integrated prediction model for L12 phase volume fraction and hardness of HEAs on training and test datasets: a comparison of R2 values, b comparison of RMSE values

Fig. 6 Scatterplot of SHAP values of some features of the integrated prediction model of L12 phase volume fraction and hardness for HEAs

Fig. 7 Heat map of Pearson’s correlation coefficient set between different features of the EWM-based database for comprehensive strength and plasticity prediction of HEAs

Fig. 8 Performance of the combined strength and plasticity prediction model for HEAs on test and training datasets: a-d test dataset, e-h: training data set, i distribution of SHAP values for different input features of the combined strength and plasticity prediction model

Fig. 9 R2 and RMSE values of the combined strength and plasticity prediction model for HEAs on the training and test datasets: a comparison of R2 values, b comparison of RMSE values

Fig. 10 Search space for a comprehensive prediction system for L12 phase-strengthened Fe-Co-Ni-based HEAs

Table 2 Composition and process set of candidate HEAs to be verified after screening

Alloy	Fe (at.%)	Co (at.%)	Ni (at.%)	Cr (at.%)	Al (at.%)	Ti (at.%)	F-A-Tem (℃)	F-A-Time (h)
A1	25	31	37	-	2	5	800	8
A2	25	25	41	-	3	6	800	8
A3	23	28	37	4	4	4	800	8
A4	24	27	32	8	6	3	800	8

Fig. 11 XRD patterns of candidate HEAs (A1, A2, A3 and A4)

Fig. 12 SEM images of microstructure of candidate HEAs: a-c A1, d-f A2, g-i A3, j-l A4

Table 3 Experimental and predicted EW1 values for candidate HEAs

Alloy	L1₂ phase volume fraction (Experiment value)	Hardness (Experiment value)	EW1 (Experiment value)	EW1 (Predicted value)
A1	45%	385.5 HV	1.8273	1.9754
A2	43%	381.6 HV	1.8115	1.9865
A3	48%	393.9 HV	1.8687	1.9851
A4	47%	388.9 HV	1.8454	1.9625

Fig. 13 Tensile properties of candidate HEAs at room temperature: a tensile curves, b comparison of alloy properties, c tensile and yield strengths, d elongation

Fig. 14 Tensile fracture morphology of candidate high entropy alloys: a, b A1, c, d A2, e, f A3, g, h A4

Table 4 Experimental and predicted EW2 values for candidate HEAs

Alloy	Tensile strength (Experiment value)	Yield strength (Experiment value)	Total elongation (Experiment value)	EW2 (Experiment value)	EW2 (Predicted value)
A1	~ 1436 MPa	~ 1014 MPa	~ 32.7%	2.9695	3.1978
A2	~ 1421 MPa	~ 1021 MPa	~ 24%	2.9417	3.1965
A3	~ 1526MPa	~ 1138 MPa	~ 24.3%	2.9789	3.2368
A4	~ 1490 MPa	~ 1097 MPa	~ 32%	3.0143	3.2332

References 55

[1]	J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang, Adv. Eng. Mater. 6, 299 (2004)
[2]	B. Cantor, I.T.H. Chang, P. Knight, A.J.B. Vincent, Mater. Sci. Eng. A 375, 213 (2004)
[3]	S. Dasari, Y.J. Chang, A. Jagetia, V. Soni, A. Sharma, B. Gwalani, S. Gorsse, A.C. Yeh, R. Banerjee, Mater. Sci. Eng. A 805, 140551 (2021)
[4]	D.B. Miracle, O.N. Senkov, Acta Mater. 122, 448 (2017)
[5]	B. Cao, T. Yang, W.H. Liu, C.T. Liu, MRS Bull. 44, 854 (2019)
[6]	Z.P. Lu, H. Wang, M.W. Chen, I. Baker, J.W. Yeh, C.T. Liu, T.G. Nieh, Intermetallics 66, 67 (2015)
[7]	Y.S. Geng, J. Chen, H. Tan, J. Cheng, J. Yang, W.M. Liu, Wear 456,203368 (2020)
[8]	W. He, C. Zeng, W. Yang, W.H. Chen, Y.L. Ai, J. Mater. Res. Technol. 21, 4577 (2022)
[9]	L. Zhang, Y. Zhou, X. Jin, X.Y. Du, B.S. Li, Mater. Sci. Eng. A 732, 186 (2018)
[10]	M.L. Wang, Y.P. Lu, J.G. Lan, T.M. Wang, C. Zhang, Z.Q. Cao, T.J. Li, P.K. Liaw, Acta Mater. 248, 118806 (2023)
[11]	Y.P. Lu, X.Z. Gao, L. Jiang, Z.N. Chen, T.M. Wang, J.C. Jie, H.J. Kang, Y.B. Zhang, S. Guo, H.H. Ruan, Y.H. Zhao, Z.Q. Cao, T.J. Li, Acta Mater. 124, 143 (2017)
[12]	X.J. Hua, P. Hu, H.R. Xing, J.Y. Han, S.W. Ge, S.L. Li, C.J. He, K.S. Wang, C.J. Cui, Acta Metall. Sin. -Engl. lett. 35, 1231 (2022)
[13]	C.D. Zhao, J.S. Li, Y.D. Liu, X. Ma, Y.J. Jin, W.Y. Wang, H.C. Kou, J. Wang, J. Mater. Sci. Technol. 86, 117 (2021)
[14]	A. Kumar, A.K. Swarnakar, M. Chopkar, J. Mater. Eng. Perform. 27, 3304 (2018)
[15]	Y. Tong, D. Chen, B. Han, J. Wang, R. Feng, T. Yang, C. Zhao, Y.L. Zhao, W. Guo, Y. Shimizu, C.T. Liu, P.K. Liaw, K. Inoue, Y. Nagai, A. Hu, J.J. Kai, Acta Mater. 165, 228 (2019) DOI
[16]	R. Li, L. Guo, Y. Liu, Q. Peng, Acta Metall. Sin. -Engl. Lett. 36, 1482 (2023)
[17]	Q.Q. Lu, X.H. Chen, W. Tian, H. Wang, P. Liu, H.L Zhou, S.L. Fu, Y.H. Gao, M.Y. Wan, X.J. Wang. J. Alloys Compd. 897, 163036 (2022)
[18]	J. Chen, X.Y. Zhou, W.L. Wang, B. Liu, Y.K. Lv, W. Yang, D.P. Xu, Y. Liu, J. Alloys Compd. 760, 15 (2018)
[19]	D. Huang, J.S. Lu, Y.X. Zhuang, C.X. Tian, Y.B. Li, Corros. Sci. 158, 108088 (2019)
[20]	X.Y. Gu, D. Huang, Y.X. Zhuang, Vacuum 204, 111350 (2022)
[21]	C.J. Liang, Y.L. Deng, C.L. Wang, W.B. Zhu, J. Mater. Sci. 58, 12083 (2023)
[22]	L. Zhang, Y. Zhou, X. Jin, X.Y. DuY, B.S. Li, Mater. Sci. Eng. A 732, 186 (2018)
[23]	P. Raccuglia, K.C. Elbert, P.D.F. Adler, C. Falk, M.B. Wenny, A. Mollo, M. Zeller, S.A. Friedler, J. Schrier, A.J. Norquist, Nature 533, 73 (2016)
[24]	K.T. Butler, D.W. Davies, H. Cartwright, O. Isayev, A. Walsh, Nature 559, 547 (2018)
[25]	Z.Y. Rao, P.Y. Tung, R.W. Xie, Y. Wei, H.B. Zhang, A. Ferrari, T.P.C. Klaver, F. Körmann, P.T. Sukumar, A.K. Silva, Y. Chen, Z.M. Li, D. Ponge, J. Neugebauer, O. Gutfleisch, S. Bauer, D. Raabe, Science 378, 78 (2022)
[26]	C.C. Wang, C.G. Shen, Q. Cui, C. Zhang, W. Xu, J. Nucl. Mater. 529, 151823 (2020)
[27]	Y.F. Chen, Y. Tian, Y.M. Zhou, D.Q. Fang, X.D. Ding, J. Sun, D.Z. Xue, J. Alloys Compd. 844, 156159 (2020)
[28]	Y.P. Diao, L.C. Yan, K.W. Gao, J. Mater. Sci. Technol. 109, 86 (2022)
[29]	Y. Lu, K. Zhang, B.B. Zhao, X.P. Dong, F. Sun, B.X. Zhou, Y.Q. Zhen, L.T. Zhang, Mater. Sci. Eng. A 866, 144677 (2023)
[30]	H.L. Peng, L. Hu, L.J. Li, W.P. Zhang, Mater. Sci. Eng. A 772, 138803 (2020)
[31]	Y. Qiu, S. Thomas, D. Fabijanic, A.J. Barlow, H.L. Fraser, N. Birbilis, Design 170, 107698 (2019)
[32]	T. Yang, Y.L. Zhao, L. Fan, J. Wei, J.H. Luan, W.H. Liu, C. Wang, Z.B. Jiao, J.J. Kai, C.T. Liu, Acta Mater. 189, 47 (2020) DOI
[33]	Y. Guan, Y.C. Liu, Z.Q. Ma, H.J. Li, H.Y. Yu, J. Alloys Compd. 842, 155891 (2020)
[34]	X. Li, Z.X. Zhou, C.L. Wang, H.Q. Qin, J.J. Yang, W.J. Liu, M.L. Liang, C. Liu, H. Tan, Z.J. Zhang, J. Vac. Sci. Technol. A 41, 063105 (2023)
[35]	W. Ren, Y.F. Zhang, W.L. Wang, S.J. Ding, N. Li, Mater. Des. 235, 112454 (2023)
[36]	A.A. Catal, E. Bedir, R. Yilmaz, M.A. Swider, C. Lee, O. El-Atwani, H.J. Maier, H.C. Ozdemir, D. Canadinc, Comput. Mater. Sci. 231, 112612 (2023)
[37]	Y.L. Qi, Y.K. Wu, T.H. Cao, F. Jiang, J. Sun, Mater. Sci. Eng. A 797, 140056 (2020)
[38]	E.A. Anber, N.C. Smith, P.K. Liaw, C.M. Wolverton, M.L. Taheri, APL Mater. 10, 101108 (2022)
[39]	Y.U. Guo, H.J. Su, P.X. Yang, Y. Yang, Z.L. Shen, Y. Liu, D. Zhao, H. Jiang, L. Liu, H.Z. Fu, Acta Metall. Sin. -Engl. Lett. 35, 1407 (2022)
[40]	W.J. Lu, K. Yan, X. Luo, Y.T. Wang, L. Hou, P.T. Li, B. Huang, Y.Q. Yang, J. Mater. Sci. Technol. 98, 197 (2022)
[41]	X. Bai, W. Fang, R.B. Chang, H.Y. Yu, X. Zhang, F.X. Yin, Mater. Sci. Eng. A 767, 138403 (2019)
[42]	Q.W. Guo, Y. Pan, H. Hou, Y.H. Zhao, Met. Hard Mater. 112, 106116 (2023)
[43]	C.L. Wang, C.J. Liang, M.J. Yang, C. Huang, Z.F. Yao, B. Qiu, K.X. Zhang, Y.G. Xie, M.L. Liang, W.J. Liu, J.J. Yang, S.F. Zhou, Mater. Des. 221, 110940 (2022)
[44]	S. Li, S. Li, D.R. Liu, R. Zou, Z.Y. Yang, Comput. Mater. Sci. 205, 11185 (2022)
[45]	X. Huang, Y. Dong, S.M. Lu, C.Q. Li, Z.G. Zhang, Acta Metall. Sin. -Engl. Lett. 34, 1079 (2021)
[46]	L. Zhang, Y. Zhou, X. Jin, X.Y. Du, B.S. Li, Scr. Mater. 146, 226 (2018)
[47]	Y.L. Zhao, T. Yang, Y.R. Li, L. Fan, B. Han, Z.B. Jiao, D. Chen, C.T. Liu, J.J. Kai, Acta Mater. 188, 517 (2020) DOI
[48]	N. Li, C.L. Jia, Z.W. Wang, L.H. Wu, D.R. Ni, Z.K. Li, H.M. Fu, P. Xue, B.L. Xiao, Z.L. Ma, Y. Shao, Y.L. Chang, Acta Metall. Sin. -Engl. Lett. 33, 947 (2020)
[49]	C.J. Liang, C.L. Wang, K.X. Zhang, H. Tan, M.L. Liang, Y.G. Xie, W.J. Liu, J.J. Yang, S.F. Zhou, J. Alloys Compd. 911, 165082 (2022)
[50]	X.R. Fan, L. Xie, Q. Li, C.T. Chang, H.X. Li, Acta Metall. Sin. -Engl. Lett. 36, 417 (2023)
[51]	Y.W. Wu, X.Y. Zhao, Q. Chen, C. Yang, M.G. Jiang, C.Y. Liu, Z. Jia, Z.W. Chen, T. Yang, Z.Y. Liu, Vir. Phys. Pro. 17, 451 (2022)
[52]	S.Y. Li, F.D. Chen, X.B. Tang, G.J. Ge, Z.J. Sun, Z.L. Geng, M.Y. Fan, P. Huang, J. Mater. Eng. Perform. 31, 8294 (2022)
[53]	G.L. Ma, Y. Zhao, H.Z. Cui, X.J. Song, M.L. Wang, K. Lee, X.H. G, Q. Song, C.M. Wang. Acta Metall. Sin. -Engl. Lett. 34, 1087 (2021)
[54]	J. Zhang, Y.Y Hu, Q.Q Wei, Y. Xiao, P.A. Chen, G.Q. Luo, Q. Shen. J. Alloys Compd. 827, 154301 (2020)
[55]	R. Li, J. Ren, G.J. Zhang, J.Y. He, Y.P. Lu, T.M. Wang, T.J. Li, Acta Metall. Sin. -Engl. Lett. 33, 10466 (2020)

Machine Learning-Based Comprehensive Prediction Model for L1₂ Phase-Strengthened Fe-Co-Ni-Based High-Entropy Alloys

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 18

References 55

Related Articles 15

Recommended Articles

Metrics

Comments

Alloy	Fe (at.%)	Co (at.%)	Ni (at.%)	Cr (at.%)	Al (at.%)	Ti (at.%)	F-A-Tem (℃)	F-A-Time (h)
A1	25	31	37	-	2	5	800	8
A2	25	25	41	-	3	6	800	8
A3	23	28	37	4	4	4	800	8
A4	24	27	32	8	6	3	800	8

Alloy	Fe (at.%)	Co (at.%)	Ni (at.%)	Cr (at.%)	Al (at.%)	Ti (at.%)	F-A-Tem (℃)	F-A-Time (h)
A1	25	31	37	-	2	5	800	8
A2	25	25	41	-	3	6	800	8
A3	23	28	37	4	4	4	800	8
A4	24	27	32	8	6	3	800	8

[1]	Lei Chen, Gang Qin, Yao Chen, Qi Wang, Liang Wang, Yanqing Su, Ruirun Chen. Machine learning-assisted design of lightweight refractory high-entropy alloys: A comprehensive review [J]. Metals Advances, 2026, 40(2): 26-47.
[2]	Hao Cheng, Cheng-Lei Wang, Xiao-Du Li, Li Pan, Chao-Jie Liang, Wei-Jie Liu. Machine Learning-Based High Entropy Alloys-Algorithms and Workflow: A Review [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1453-1480.
[3]	Jiayu Wang, Ke Liu, Zhao Lei, Xing Li, Li Liu, Sujun Wu. Machine-Learning-Assisted Phase Prediction in High-Entropy Alloys Using Two-Step Feature Selection Strategy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1261-1274.
[4]	Biao Zhang, Yuntian Du, Huishuang Jia, Yuanyi Zhou, Liguang Wang, Minghe Zhang, Yunli Feng, Weimin Gao, Ning Xu. Hot Deformation Behavior of CoNiV Medium-Entropy Alloy: Constitutive Model, Convolutional Neural Network, Hot Processing Map, and Microstructure Evolution [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1275-1292.
[5]	Xiaolong Pei, Hua Hou, Yuhong Zhao. A Review of Intelligent Design and Optimization of Metal Casting Processes [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1293-1311.
[6]	Zhongxue Wang, Le Ren, Yating Zhang, Mengcheng Zhou, Xinfang Zhang. Realizing Ultra-fast Spheroidization of GCr15 Bearing Steel by Analyzing the Correlation of Carbide Dissolution Law and Pulsed Electric Current Parameters Through Machine Learning [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1207-1218.
[7]	Meisa Zhou, Kun-Ming Pan, Xiao-Ye Zhou, Shulong Ye, Shaojie Du, Hong-Hui Wu. Surface Wear Behavior of Nanograined NbMoTaW Refractory High-Entropy Alloys via Nano-scratching Simulations [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 946-960.
[8]	Hong Chen, Ruitao Qu, Haotian Ma, Kexing Song, Feng Liu. Simultaneously Enhanced Strength and Fracture Resistance in HfNbTaTiZr Refractory High-Entropy Alloy at Higher Strain Rate [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(4): 529-541.
[9]	Jingxiang Xu, Yuyan Yang, Ruiyang Huang, Xinwei Yuan, Huakang Bian, Zhenhua Chu, Yang Wang, Yanhua Lei. Enhancing the Corrosion Resistance of FeNiCoCrW_0.2Al_0.1 High-Entropy Alloy in 3.5 wt% NaCl Solution by Bilayer Passivation [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 407-418.
[10]	Lingxiao Du, Hang Ding, Yun Xie, Li Ji, Wanbin Chen, Yunze Xu. Effect of Laser Energy Density on Microstructures and Properties of Additively Manufactured AlCoCrFeNi_2.1 Eutectic High-Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(2): 233-244.
[11]	Liang Liang, Huifang Pang, Renguo Guan, Wenbo Du, Minqiang Gao, Jin Zhang, Huan Ma. Electromagnetic Wave Absorption Performance of FeCoCrAl_0.4V_x High-Entropy Alloys by Adjusting the Amount of V Content [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2217-2227.
[12]	Zhuangzhuang Li, Qingshuang Ma, Dongxu Wang, Linlin Sun, Jing Bai, Huijun Li, Qiuzhi Gao. Review on Rapid Alloying Design and Mechanical Properties Prediction of Ni-Based Superalloys Based on Machine Learning [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(11): 1853-1872.
[13]	Zeyu You, Zhengyou Tang, Li Zhao, Dongdong Cao, Zhibing Chu, Hailian Gui, Hua Ding. Significant Enhancement of Strength and Ductility in a Tri-Phase FeMnCoCrAl High-Entropy Alloy Through the Design of a Heterogeneous Layered Structure [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(11): 1965-1973.
[14]	Yi-Ming Chen, Jian-Lin Lu, Dong Yu, Hua-Yong Ren, Xiao-Bin Hu, Lei Wang, Zhi-Jun Wang, Jun-Jie Li, Jin-Cheng Wang. Accurate Identification of High Relative Density in Laser-Powder Bed Fusion Across Materials Using a Machine Learning Model with Dimensionless Parameters [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(10): 1645-1656.
[15]	Hongwei Yan, Yong’an Zhang, Wei Xiao, Boyu Xue, Rui Liu, Xiwu Li, Zhihui Li, Baiqing Xiong. Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1480-1490.

Alloy	Fe (at.%)	Co (at.%)	Ni (at.%)	Cr (at.%)	Al (at.%)	Ti (at.%)	F-A-Tem (℃)	F-A-Time (h)
A1	25	31	37	-	2	5	800	8
A2	25	25	41	-	3	6	800	8
A3	23	28	37	4	4	4	800	8
A4	24	27	32	8	6	3	800	8

Alloy	Fe (at.%)	Co (at.%)	Ni (at.%)	Cr (at.%)	Al (at.%)	Ti (at.%)	F-A-Tem (℃)	F-A-Time (h)
A1	25	31	37	-	2	5	800	8
A2	25	25	41	-	3	6	800	8
A3	23	28	37	4	4	4	800	8
A4	24	27	32	8	6	3	800	8

Alloy	Fe (at.%)	Co (at.%)	Ni (at.%)	Cr (at.%)	Al (at.%)	Ti (at.%)	F-A-Tem (℃)	F-A-Time (h)
A1	25	31	37	-	2	5	800	8
A2	25	25	41	-	3	6	800	8
A3	23	28	37	4	4	4	800	8
A4	24	27	32	8	6	3	800	8

Alloy	Fe (at.%)	Co (at.%)	Ni (at.%)	Cr (at.%)	Al (at.%)	Ti (at.%)	F-A-Tem (℃)	F-A-Time (h)
A1	25	31	37	-	2	5	800	8
A2	25	25	41	-	3	6	800	8
A3	23	28	37	4	4	4	800	8
A4	24	27	32	8	6	3	800	8