Acta Metallurgica Sinica (English Letters) >
Investigation of the solute transportation coupled with heat transfer and fluid flow during twin-roll strip casting process
Received date: 2008-10-21
Revised date: 2008-11-11
Online published: 2009-10-15
Mathematical model of solute [C] distribution in twin-roll strip casting process has been setup successfully with Calcosoft for the first time. Simulation result shows that in the center of the molten steel pool between the two rolls there is a vortex flow, which is a solute enriched area. But the highest solute concentration position is at the solidification front of the columnar grain zone near the cooling roll surface. Another solute enriched position is in the back flow above the nip point. Combined with the formation mechanism of microstructure in final as cast strip, analysis shows that solute enriched area is in the transitional area between columnar and equiaxed grain zone.
Yongsheng WANG , Chenxi JI , Jiongming ZHANG , Xinhua WANG , Wanjun WANG . Investigation of the solute transportation coupled with heat transfer and fluid flow during twin-roll strip casting process[J]. Acta Metallurgica Sinica (English Letters), 2009 , 22(5) : 345 -352 . DOI: 10.1016/S1006-7191(08)60108-8
[1] N. Zapuskalov, ISIJ Int 43 (2003) 1115.
[2] K. Shibuya and M. Ozawa, ISIJ Int 31 (1991)661.
[3] Y.K. Shin, T. Kang, T. Reynolds and L. Wright, Ironmaking & Steelmaking 22 (1995) 35.
[4] P. Campell, Blejde, R. Mahapatra, R. Wechsler and G.Gillen, Iron and Steel Technology 7 (2005) 56.
[5] Z.M. Wang, Y. Fang, J.J. Qi, Y. Zhang, Y. Yu and J.C. Wu, J Univ Sci Technol Beijing 14 (2007) 420.
[6] R.P. Tavares, M. Isac and R.I. Guthrie, ISIJ Int 38 (1998) 1353.
[7] Y. Fuang and G.M. Zhu, J Univ Sci Technol Beijing 29 (2007) 504 (in Chinese).
[8] R.I.L. Guthrie and R.P. Tavares, Appl Math Model 22 (1998) 851.
[9] B. Wang, J.Y. Zhang, Y. Zhang, Y.D. He, J.F. Fan, Y. Fang and S.L. An, J Univ Sci Technol Beijing 13 (2006) 393.
[10] J.D. Hwang, H.J. Lin, W.S. Hwang and C. T. Hu, ISIJ Int 35 (1995) 170.
[11] Z.M. Jin, PhD Dissertation (Northeastern University, Shenyang, China, 1999).
[12] A.V. Kuznetsov, Int J Heat Mass Transfer 40 (1997) 2949.
[13] R.S. Rerko, H.C. de Groh and C. Beckermann, Mater Sci Eng A 347 (2003) 186.
[14] M.C. Schneider and C. Beckermann, Int J Heat Mass Transfer 38 (1995) 3455.
[15] N. Ahmad, H. Combeau, J.L. Desbiolles, T. Jalanti, G.Lesoult, J. Rappaz, M. Rappaz and C. Stomp, Metall Mater Trans A 29A (1998) 617.
[16] H. Combeau and A. Mo, Metall Mater Trans. 28A (1997) 2705.
[17] X. Doré, H. Combeau and M. Rappaz, Acta Mater 48 (2000) 3951.
[18] H. Yasunaka, K. Taniguchi, M. Kokita, T. Inoue, ISIJ Int 35 (1995) 784.
[19] C.X. Ji, PhD Dissertation (University of Science and Technology Beijing, Beijing, 2008).
[20] M.B. Yang, F.S. Pan and D.F. Zhang, Chin J Mater Res 19 (2005) 325.
/
| 〈 |
|
〉 |
WeChat