Research paper

Mechanical assisted electroless barrel-plating Ni-P coatings on magnesium alloy

  • Zhaoxia PING ,
  • Juntao YUAN ,
  • Yedong HE ,
  • Xiaogang LI
Expand
  • Beijing Key Laboratory for Corrosion,Erosion and Surface Technology, University of Science and Technology Beijing, Beijing 100083, China

Received date: 2008-07-15

  Revised date: 2008-10-24

  Online published: 2009-10-10

Abstract

A mechanically assisted electroless barrel-plating Ni-P was carried out in a rolling drum containing Mg alloy specimens and ceramic balls, which was submerged in a bath containing electroless plating solution. It is demonstrated that the Ni-P coatings deposited by this novel technique have a crystallized Ni-P solid solution structure, showing fine-grains, higher hardness, and higher corrosion resistance compared with the conventional electroless plated amorphous Ni-P coatings. After heat treatment at 400℃ for 1 h, the structure of such Ni-P coatings were transformed to a structure with Ni-Ni3P double phases, and cracks in these coatings could not be observed, whereas cracks appeared seriously in the conventional electroless plated Ni-P coating after same heat treatment. Therefore, both hardness and corrosion resistance of these Ni-P coatings can be improved further by heat treatment. All of these beneficial effects can be attributed to the role of mechanical attrition during the mechanically assisted electroless barrel-plating process.

Cite this article

Zhaoxia PING , Juntao YUAN , Yedong HE , Xiaogang LI . Mechanical assisted electroless barrel-plating Ni-P coatings on magnesium alloy[J]. Acta Metallurgica Sinica (English Letters), 2009 , 22(3) : 225 -232 . DOI: 10.1016/S1006-7191(08)60093-9

References

[1] S. Eisner,  J Plating (USA)  58(1971)993.
[2] N.E. Wisdom and S. Eisner,  J Plating (USA)  58(1971)1099.
[3] S. Eisner and N.E. Wisdom,  J Plating (USA)  58(1971)1183.
[4] US Patent 3,753,889 (1972).
[5] S. Eisner and J. Trans,  Inst Met Fin  51(1973)13.
[6] Y.D. He, Z.L. Zhan and D.R. Wang, China Patent,ZL200410009189.7.
[7] Z.L. Zhan, Y.D. He, D.R. Wang and W. Gao,  J Intermet 14(2006)75.
[8] Z. Ning, Y. He and W. Gao,  Surf Coat Technol  202(2008)2139.
[9] Y. He, H. Fu, X. Li and W. Gao,  Scr Mater  58(2008)504.
[10] P.H. Tremmel,  Finishing Equipment 34.
[11] A.W. Goldenstein, W. Rostoker and F. Schossberger,  J Electrochem Soc  104(1957)104.
[12] Z. Guo. K.G. Keong and W. Sha,  J Alloy Compd  358(2003)112.
[13] K.G. Keong, W. Sha and S. Malinov,  J Mater   37(2002)4445

Outlines

/