Acta Metallurgica Sinica (English Letters) >
Application of orthogonal experimental design and Tikhonov regularization method for the identification of parameters in the casting solidificationp rocess
Received date: 2008-03-06
Revised date: 2008-05-21
Online published: 2009-10-10
The inverse heat conduction method is one of methods to identify the casting simulation parameters. A new inverse method was presented according to the Tikhonov regularization theory. One appropriate regularized functional was established, and the functional was solved by the sensitivity coefficient and Newton-Raphson iteration method. Moreover, the orthogonal experimental design was used to estimate the appropriate initial value and variation domain of each variable to decrease the number of iteration and improve the identification accuracy and efficiency. It illustrated a detailed case of AlSi7Mg sand mold casting and the temperature measurement experiment was done. The physical properties of sand mold and the interfacial heat transfer coefficient were identified at the meantime. The results indicated that the new regularization method was efficient in overcoming the ill-posedness of the inverse heat conduction problem and improving the stability and accuracy of the solutions.
Dashan SUI , Zhenshan CUI . Application of orthogonal experimental design and Tikhonov regularization method for the identification of parameters in the casting solidificationp rocess[J]. Acta Metallurgica Sinica (English Letters), 2009 , 22(1) : 13 -21 . DOI: 10.1016/S1006-7191(08)60065-4
[1] J.V. Beck, Inverse Heat Conduction-Ill-Posed Problems (Wiley-Interscience, New York,1985) p.3.
[2] D.M. Trujillo, Practical Inverse Analysis in Engineering (Boca Raton, New York, 1997) p.19.
[3] J.V.Beck, B. Blackwell and A. Hajisheikh, Int Comm Heat Mass Transfer 39 (1996) 3649.
[4] M. Krishnan and D.G.R.Sharma, Int Comm Heat Mass Transfer 23(1996)203.
[5] T.G. Kim and Z.H. Lee, Int J Heat Mass Transfer 40(1997)3513.
[6] D. Mahoney and D.J. Browne, Experimental Thermal and Fluid Science 22(2000)111.
[7] S. Chantasiriwan, Int Comm Heat Mass Transfer 27(2000)1155.
[8] R.A. Khachfe and Y. Jarny, Int J Heat Mass Transfer 44 (2001) 1309.
[9] J. Adeleke and A. Muikku, Proc 10th International Conference on Modeling of Casting, Welding and Adwanced Solidification Processes (Engineering Conferences International, Indiana, USA, 2003).
[10] E. Majchrzak, J. Mendakiewicz and A.P. Belkhayat, J Mater Process Technol 165(2005)1544.
[11] H.M.Sahin, K. Kocatepe and R. Kayikci, Energy Conversion and Management 47(2006)19.
[12] P.L. Woodfield, M.Monde and Y. Mitsutake,Int J Heat Mass Transfer 49(2006) 187.
[13] P. Wikstrom, W. Blasiak and F. Berntsson, Appl Thermal Eng 27(2007) 2463.
[14] S.M. Xiong,Q.Y. Xu and J.W. Kang, Numer Simul Technol Cast Process (Machine Press, Beijing, 2004) p.133.
[15] T.Y. Xiao, S.G. Yu and Y.F. Wang, Numer Solution Inverse Problem (Science Press, Beijing, 2003) p.8.
[16] J.J. Liu, The Regularization Method and Application of Ill-posedness Problem (Science Press, Beijing, 2005) p.37.
[17] M. Rappaz, J.L. Desbiolles and J.M. Drezet, Proc 7th International Conference on Modeling of Casting, Welding and Adwanced Solidification Processes (University of Birmingham, London, England, 1995).
[18] MAGMASOFT Company, MAGMASOFT V4.4 Manual, 2005
/
| 〈 |
|
〉 |
WeChat