research-article

In-situ Tension of Dendrite-Reinforced Zr-based Metallic-Glass-Matrix Composites

  • Huijun Yang ,
  • Junwei Qiao ,
  • Song Wang ,
  • Yong Zhang
Expand
  • 1. Research Institute of Surface Engineering, Taiyuan University of Technology, Taiyuan, 030024, China
    2. College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, 030024, China
    3. State Key Laboratory of Advanced Metals and Materials, University of Science and Technology Beijing, Beijing, 100083, China

Received date: 2013-11-27

  Revised date: 2014-03-15

  Online published: 2014-10-16

Abstract

The evolution of shear bands in the glassy matrix composites was observed and analyzed during in-situ tension. Based on the simple calculation, the temperature rise within the shear bands is sufficient to cause the formation of viscous shearing layer, resulting in the early failure. Zr-based metallic-glass-matrix composites (labeled as DH1 and DH2) exhibit improved tensile ductility rather than brittle failure, since the existence of secondary ductile dendrites promotes the impedance of prompt propagation of shear bands, evidenced by the multiplication of shear bands.

Cite this article

Huijun Yang , Junwei Qiao , Song Wang , Yong Zhang . In-situ Tension of Dendrite-Reinforced Zr-based Metallic-Glass-Matrix Composites[J]. Acta Metallurgica Sinica (English Letters), 2014 , 27(4) : 621 -626 . DOI: 10.1007/s40195-014-0105-8

References

[1] M.K. Miller, P.K. Liaw, Bulk Metallic Glasses(Springer, New York, 2007)
[2] C.A. Schuh, T.C. Hufnagel, U. Ramamurty, Acta Mater. 55, 4067(2007)10.1016/j.actamat.2007.01.052
[3] C.C. Hays, C.P. Kim, W.L. Johnson, Phys. Rev. Lett. 84, 2901(2000)10.1103/PhysRevLett.84.2901
[4] J.W. Qiao, J. Mater. Sci. Technol. 29, 685(2013)10.1016/j.jmst.2013.05.020
[5] D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind, M.D. Demetriou, W.L. Johnson, Nature 451, 1085(2008)10.1038/nature06598
[6] J.W. Qiao, Y. Zhang, P. Feng, Q.M. Zhang, G.L. Chen, Mater. Sci. Eng. A 515, 141(2009)10.1016/j.msea.2009.02.043
[7] J.W. Qiao, S. Wang, Y. Zhang, P.K. Liaw, G.L. Chen, Appl. Phys. Lett. 94, 151905(2009)10.1063/1.3118587
[8] J.W. Qiao, A.C. Sun, E.W. Huang, Y. Zhang, P.K. Liaw, C.P. Chuang, Acta Mater. 59, 4126(2011)10.1016/j.actamat.2011.03.036
[9] W.G. Zhang, Y. Zhang, G.J. Hao, J.P. Lin, Mater. Sci. Eng. A 516, 148(2009)10.1016/j.msea.2009.03.058
[10] R.T. Qu, M. Calin, J. Eckert, Z.F. Zhang, Scr. Mater. 66, 733(2012)10.1016/j.scriptamat.2012.01.044
[11] G.Y. Wang, P.K. Liaw, A. Smyth, M. Denda, A. Peker, M. Freels, R.A. Buchanan, C.R. Brooks, Rev. Adv. Mater. Sci. 18, 18(2008)
[12] J.X. Zhao, R.T. Qu, F.F. Wu, S.X. Li, Z.F. Zhang, Philos. Mag. 90, 3867(2010)10.1080/14786435.2010.498777
[13] J.W. Qiao, S.G. Ma, G.Y. Wang, F. Jiang, P.K. Liaw, Y. Zhang, Metall. Mater. Trans. A 42, 2530(2011)10.1007/s11661-011-0788-7
[14] D. Okai, T. Fukami, T. Yamasaki, T. Zhang, A. Inoue, Mater. Sci. Eng. A 375–377, 364(2004)10.1016/j.msea.2003.10.148
[15] M. Yamasaki, S. Kagao, Y. Kawamura, Scr. Mater. 53, 63(2005)10.1016/j.scriptamat.2005.03.021
[16] K. Georgarakis, M. Aljerf, Y. Li, A. LeMoulec, F. Charlot, A.R. Yavari, K. Chornokhvostenko, E. Tabachnikova, G.A. Evangelakis, D.B. Miracle, A.L. Greer, T. Zhang, Appl. Phys. Lett. 93, 031907(2008)10.1063/1.2956666
[17] D.T.A. Matthews, V. Ocelík, P.M. Bronsveld,JThM De Hosson, Acta Mater. 56, 1762(2008)10.1016/j.actamat.2007.12.029
[18] Y.Q. Cheng, Z. Han, Y. Li, E. Ma, Phys. Rev. B 80, 134115(2009)10.1103/PhysRevB.80.134115
[19] J.W. Qiao, Y. Zhang, P.K. Liaw, Intermetallics 18, 2057(2010)10.1016/j.intermet.2010.06.013
[20] J.J. Lewandowski, A.L. Greer, Nat. Mater. 5, 15(2006)10.1038/nmat1536
[21] F.F. Wu, Z.F. Zhang, S.X. Mao, Acta Mater. 57, 257(2009)10.1016/j.actamat.2008.09.012
[22] X.X. Xia, W.H. Wang, A.L. Greer, J. Mater. Res. 24, 2986(2009)10.1557/jmr.2009.0362
[23] C.T. Liu, L. Heatherly, D.S. Easton, C.A. Carmichael, J.H. Schneibel, C.H. Chen, J.L. Wright, M.H. Yoo, J.A. Horton, A. Inoue, Metall. Mater. Trans. A 29, 1811(1998)10.1007/s11661-998-0004-6
[24] J.T. Fan, Z.F. Zhang, S.X. Mao, B.L. Shen, A. Inoue, Intermetallics 17, 445(2009)10.1016/j.intermet.2008.12.004
Options
Outlines

/