Acta Metallurgica Sinica (English Letters) >
An Introduction to Advanced Hot-Formed Steel for Automobile
Received date: 2014-04-13
Revised date: 2014-05-05
Online published: 2014-07-18
A recently developed advanced hot-formed (AHF) steel for automobile is introduced and three physical metallurgy concepts based on which the AHF steel was designed are reviewed, they are dynamic carbon partitioning (DCP), flash copper precipitation and bake toughening. AHF steel is an upgrade of the existing hot-formed steel especially suitable for making components with superior crashworthiness; it can be processed by regular hot stamping equipment and process. A kinetics model for DCP is expressed in detail, which can be used to calculate the volume fraction of retained austenite based on four materials and processing parameters. The flash copper precipitation used as an additional strengthening mechanism for AHF steel is also discussed and its ultrafast kinetics can be attributed to the enhancement of quenched-in vacancies on copper diffusion. Also, the bake toughening of AHF steel is addressed; the mechanism of which may be related to the elimination of the less stable block-like retained austenite.
W. J. Liu . An Introduction to Advanced Hot-Formed Steel for Automobile[J]. Acta Metallurgica Sinica (English Letters), 2014 , 27(3) : 373 -382 . DOI: 10.1007/s40195-014-0076-9
| [1] | China world’s largest auto production site in 2013: report,(English News, Xinhua News, 2014), . Accessed 14 Jan 2014 |
| [2] | Z. Wang, Y. Jin, Energy Sav. Environ. Prot.(in Chinese) 7, 17 (2008) |
| [3] | J.Aspacherin1st International Conference on Hot Sheet Metal Forming of High-Performance Steel(Kassel, Germany, 2008), p. 77 |
| [4] | K.I. Mori, Trans. Nonferrous Met. Soc. China 22, s496(2012)10.1016/S1003-6326(12)61752-X |
| [5] | G.Berglundin1st International Conference on Hot Sheet Metal Forming of High-Performance Steel(Kassel, Germany, 2008), p. 175 |
| [6] | M. Naderi, Ph.D. Thesis, RWTH Aachen, 2007 |
| [7] | A. Mittal, Catalogue—European Edition, 2014 |
| [8] | J.G. Speer, D.K. Matlock, B.C. DeCooman, J.G. Schroth, Acta Mater. 51, 2611(2003)10.1016/S1359-6454(03)00059-4 |
| [9] | J.G. Speer, D.V. Edmonds, F.C. Rizzo, D.K. Matlock, Curr. Opin. Solid State Mater. 8, 219(2004)10.1016/j.cossms.2004.09.003 |
| [10] | E. de Moor, S. Lacroix, A.J. Clarke, J. Penning, J.G. Speer, Metall. Mater. Trans. A 39, 2586(2008)10.1007/s11661-008-9609-z |
| [11] | E.De MoorC.F?jerA.J.ClarkeJ.PenningJ.G.SpeerinProceedings of the Conference on New Developments on Metallurgy and Applications of High-Strength Steels, ed. by T. Perez (TMS, Warrendale, 2009), p. 721 |
| [12] | A.M.StreicherJ.G.SpeerD.K.MatlockB.C.DeCoomaninInternational Conference on Advanced High-Strength Sheet Steels for Automotive Applications Proceedings, ed. by J.G. Speer (AIST, Warrendale, 2004), p. 51 |
| [13] | H. Liu, X. Lu, X. Jin, H. Dongb, J. Shi, Scr. Mater. 64, 749(2011)10.1016/j.scriptamat.2010.12.037 |
| [14] | H. Karbasian, A.E. Tekkaya, J. Mater. Process. Technol. 210, 2103(2010)10.1016/j.jmatprotec.2010.07.019 |
| [15] | B.C.de CoomanJ.G.SpeerI.Y.PyshmintsevN.Yoshinaga, Materials Design: The Key to Modern Steel Products, 1st edn. (Media Grips, Bad Harzburg, 2007), p. 176 |
| [16] | S. Yan, X.H. Liu, W.J. Liu, H.F. Lan, H.Y. Wu, Acta Metall. Sin.(in Chinese) 49, 917 (2013) |
| [17] | T. Lin, Ph.D. thesis, University of Chinese Academy of Sciences, 2014 (in Chinese) |
| [18] | Y.N. Duan,Master Theses, Northeastern University, 2012 (in Chinese) |
| [19] | Y. Wang,Master Theses, Northeastern University, 2013 (in Chinese) |
| [20] | B.V.N.RaoG.ThomasinInternational Conference on Martensitic Transformations(HIT Press, Cambridge, l979) p. 12 |
| [21] | M.SarikayaG.ThomasJ.W.SteedsinInternational Conference on Solid-solid Phase Transformations, ed. by H.I. Aaronson, D.E. Laughlin, R.F. Sekerka, C.M. Wayman, (TMS-AIME, Pittsburgh, 1982) p. 1421 |
| [22] | T.Y. Hsu, X. Li, Acta Metall. Sin.(in Chinese) 19, 83 (1983) |
| [23] | T.Y. Hsu, J. Phys. IV 5, 351(1995) |
| [24] | L. Kaufman, M. Cohen, Prog. Metall. Phys. 7, 165(1958)10.1016/0502-8205(58)90005-4 |
| [25] | T.Y. Hsu, H.B. Chang, Acta Metall. 32, 343(1984)10.1016/0001-6160(84)90107-X |
| [26] | V. Raghavan, D. Antia, Metall. Mater. Trans. A 27, 1127(1996)10.1007/BF02649781 |
| [27] | C.L.MageeinPhase Transformations, (Arner. Soc. Metals, Metals Park, Ohio, 1970), p. l15 |
| [28] | D.P. Koistinen, R.E. Marburger, Acta Metall. 7, 59(1959) doi: 10.1016/0001-6160(59)90170-1 |
| [29] | J.M. Chilton, P.U. Kelly, Acta Metall. 16, 637(1968)10.1016/0001-6160(68)90137-5 |
| [30] | Y. Okamura, M. Okushima, H. Tamehiro, T. Kasuya, M. Tanaka, R. Yamaba, H. Inoue, A. Seto, Nippon Steel Technol. Rep., No. 66(1995) |
| [31] | A.C.DamaskG.J.Dienes, Point Defects in Metals, 1st edn. (Gordon and Breach, New York/London, 1963) |
| [32] | S.T. Wu,Master Theses, Northeastern University, 2014 (in Chinese) |
| [33] | A. Kokosza, J. Pacyna, Arch. Mater. Sci. Eng. 31, 87(2008) |
/
| 〈 |
|
〉 |
WeChat