Acta Metallurgica Sinica (English Letters) >
Microstructural Evolutions of AA7055 Aluminum Alloy Under Dynamic and Quasi-static Compressions
Received date: 2013-09-06
Revised date: 2013-11-27
Online published: 2014-05-07
The microstructural evolution of AA7055 aluminum alloy under dynamic impact loading with the strain rate of 1.3 × 104 s-1 controlled by a split Hopkinson pressure bar was investigated, and compared with that under quasi-static mechanical loading in compression with strain rate of 1.0 × 10-3 s-1. The quasi-static-compressed sample exhibited equiaxed dislocation cells, which were different from the elongated and incomplete dislocation cells for the alloy undergoing dynamic compression. The high strain-rate compression also induced the formation of localized shear bands in which the recrystallizations characterized as fine equiaxed grains were observed. The microstructural evolutions under both quasi-static and dynamic compressions are rationalized in terms of the dislocation cell model combined with the dislocation kinetics, in addition to the adiabatic temperature rise in shear bands at high strain rate.
Yuanyuan Xiong , Ning Li , Huawen Jiang , Zhigang Li , Zhu Xu , Lin Liu . Microstructural Evolutions of AA7055 Aluminum Alloy Under Dynamic and Quasi-static Compressions[J]. Acta Metallurgica Sinica (English Letters), 2014 , 27(2) : 272 -278 . DOI: 10.1007/s40195-014-0041-7
| [1] | E.A. Starke Jr., J.T. Staley, Prog. Aerosp. Sci. 32, 131(1996)10.1016/0376-0421(95)00004-6 |
| [2] | J.C. Williams, E.A. Starke Jr., Acta Mater. 51, 5775(2003)10.1016/j.actamat.2003.08.023 |
| [3] | S. Toros, F. Ozturk, Comput. Mater. Sci. 49(2), 333(2010)10.1016/j.commatsci.2010.05.019 |
| [4] | M. Hatherly, A.S. Malin, Scr. Metall. 18, 449(1984)10.1016/0036-9748(84)90419-8 |
| [5] | N. Jia, P. Eisenlohr, F. Roters, D. Raabe, X. Zhao, Acta Mater. 60, 3415(2012)10.1016/j.actamat.2012.03.005 |
| [6] | K. Morii, H. Mecking, Y. Nakayama, Acta Metall. 33, 379(1985)10.1016/0001-6160(85)90080-X |
| [7] | Y.G. Kim, Y.G. Ko, D.H. Shin, S. Lee, Acta Mater. 58, 2545(2010)10.1016/j.actamat.2009.12.041 |
| [8] | A.G. Odeshi, A.O. Adesola, A.Y. Badmos, Eng. Fail. Anal. 35, 302(2013)10.1016/j.engfailanal.2013.02.015 |
| [9] | W.S. Lee, T.H. Chen, C.F. Lin, G.T. Lu, Mater. Trans. 51, 1216(2010)10.2320/matertrans.M2010053 |
| [10] | E. El-Magd, M. Abouridouane, Paper presented at the 1st international conference on high speed forming, Universitat Dortmund, Dortmund, 3–12 April 2004 |
| [11] | E. El-Magd, M. Abouridouane, Int. J. Impact Eng. 32, 741(2006)10.1016/j.ijimpeng.2005.03.008 |
| [12] | R. Kapoor, S. Nemat-Nasser, Mech. Mater. 27, 1(1998)10.1016/S0167-6636(97)00036-7 |
| [13] | Y.B. Xu, W.L. Zhong, Y.J. Chen, L.T. Shen, Q. Liu, Y.L. Bai, M.A. Meyers, Mater. Sci. Eng. A 299, 287(2001)10.1016/S0921-5093(00)01412-X |
| [14] | M.A. Meyers, V.F. Nesterenko, J.C. LaSalvia, Q. Xue, Mater. Sci. Eng. A 317, 204(2001)10.1016/S0921-5093(01)01160-1 |
| [15] | D.H. Li, Y. Yang, T. Xu, H.G. Zheng, Q.S. Zhu, Q.M. Zhang, Mater. Sci. Eng. A 527, 3529(2010)10.1016/j.msea.2010.02.024 |
| [16] | C. Kennedy, L.E. Murr, Mater. Sci. Eng. A 325, 131(2002)10.1016/S0921-5093(01)01449-6 |
| [17] | L.E.MurrinShock Waves and High Strain Rate Phenomena in Metals, ed. by M.A. Meyers, L.E. Murr(Plenum, New York, 1981), p. 60710.1007/978-1-4613-3219-0_37 |
| [18] | W.S. Lee, T.H. Chen, Mater. Sci. Technol. 24, 1271(2008)10.1179/174328408X323078 |
| [19] | W.S. Lee, T.H. Chen, Mater. Chem. Phys. 113, 734(2009)10.1016/j.matchemphys.2008.08.016 |
| [20] | W.S. Lee, T.H. Chen, Mater. Sci. Technol. 25, 711(2009)10.1179/174328408X393413 |
| [21] | R. Kaibyshev, T. Sakai, I. Nikulin, F. Musin, A. Goloborodko, Mater. Sci. Technol. 19, 1491(2003)10.1179/026708303225008167 |
| [22] | T.S. Srivatsan, S. Sriram, D. Veeraraghavan, V.K. Vasudevan, J. Mater. Sci. 32, 2883(1997)10.1023/A%3A1018676501368 |
| [23] | V. Raghavan, J. Phase Equilib. Diffus. 28, 203(2007)10.1007/s11669-007-9029-6 |
| [24] | W.G. Guo, X.Q. Zhang, J. Su, Y. Su, Z.Y. Zeng, X. Shao, Eur. J. Mech. A 30, 54(2011)10.1016/j.euromechsol.2010.09.001 |
| [25] | P.J. Jackson, Prog. Mater. Sci. 29, 139(1985)10.1016/0079-6425(85)90009-X |
| [26] | P.J. Jackson, Scr. Metall. 17, 199(1983)10.1016/0036-9748(83)90098-4 |
| [27] | A. Kumar, F.E. Hauser, J.E. Dorn, Acta Metall. 16, 1189(1968)10.1016/0001-6160(68)90054-0 |
| [28] | A. Kumar, R.G. Kumble, J. Appl. Phys. 40, 3475(1969)10.1063/1.1658222 |
| [29] | M.A. Shehadeh,Dissertation, Washington State University, 2005 |
| [30] | G.T.Gray IIIinShock Wave and High Strain Rate Phenomena in Materials, ed. by M.A. Meyers(Marcel-Dekker, New York, 1992), p. 899 |
| [31] | Y.B. Xu, J.H. Zhang, Y.L. Bai, M.A. Meyers, Metall. Mater. Trans. A 39, 811(2008)10.1007/s11661-007-9431-z |
| [32] | Q. Li, Y.B. Xu, Z.H. Lai, L.T. Shen, Y.L. Bai, Mater. Sci. Eng. A 276, 250(2000)10.1016/S0921-5093(99)00127-6 |
| [33] | D. Lukasak, R. Hart, Paper presented at the 50th annual conference of society of allied weight engineers, San Diego, California, 17–33 May 1991 |
/
| 〈 |
|
〉 |
WeChat