Acta Metallurgica Sinica (English Letters) >
Effect of TiB2 Particles on the Tribological Properties of Stainless Steel Matrix Composites
Received date: 2013-03-31
Revised date: 2013-05-24
Online published: 2014-03-11
The AISI316L stainless steel composites reinforced with 2, 4, 6, and 8 vol% titanium diboride (TiB2) particles were sintered by the high pressure-high temperature method. Ball-on-disk method was carried out to study wear behavior of the composites. Tests were carried out at room temperature. The TiB2 particles improved the hardness and tribological properties of the composites. The friction coefficient of the composites decreased with the increasing content of TiB2. The reduction of the wear rate with the increasing of the content of TiB2 particles in the steel matrix was also observed. It is demonstrated that the friction coefficient of composites with the same content of TiB2 particles depend on the sintering conditions.
Iwona Sulima , Piotr Klimczyk , Piotr Malczewski . Effect of TiB2 Particles on the Tribological Properties of Stainless Steel Matrix Composites[J]. Acta Metallurgica Sinica (English Letters), 2014 , 27(1) : 12 -18 . DOI: 10.1007/s40195-013-0002-6
| [1] | D.H. Bacon, L. Edwards, J.E. Moffatt, M.E. Fitzpatri, Acta Mater. 59, 3373(2011)10.1016/j.actamat.2011.02.012 |
| [2] | B.H. Li, Y. Liu, J. Li, S.J. Gao, H. Cao, L. He, Mater. Des. 31, 877(2010)10.1016/j.matdes.2009.07.042 |
| [3] | A. Anal, T.K. Bandyopadhyay, K. Das, J. Mater. Process. Technol. 172, 3518(2006)10.1016/j.jmatprotec.2005.09.011 |
| [4] | Y.F. Wang, H.Y. Wang, Y.H. Liang, R.Y. Zhao, Q.C. Jiang, Mater. Sci. Eng. A 445, 398(2007) |
| [5] | F. Akhtar, J. Alloys Compd. 459, 491(2008)10.1016/j.jallcom.2007.05.018 |
| [6] | F. Velasco, E. Gordo, R. Isabel, E.M. Ruiz-Navas, A. Bautista, J.M. Torralba, Int. J. Refract. Met. Hard Mater. 19, 319(2001)10.1016/S0263-4368(01)00053-1 |
| [7] | S.C. Tjong, K.C. Lau, Mater. Lett. 43, 274(2000)10.1016/S0167-577X(99)00273-6 |
| [8] | R. Surapol, M. Sithipong, T. Ruangdaj, Wear 265(3–4), 546(2008) |
| [9] | A. Farid, S.J. Guo, F.E. Cui, P.Z. Feng, T. Lin, Mater. Lett. 61, 189(2007)10.1016/j.matlet.2006.04.028 |
| [10] | M. Vardavoulias, M. Jeandin, F. Velasco, J.M. Torralba, Tribol. Int. 29, 499(1996)10.1016/0301-679X(95)00110-P |
| [11] | M. Vardavoulias, C. Jouanny-Tresy, M. Jeandin, Wear 165(2), 141(1993)10.1016/0043-1648(93)90329-K |
| [12] | S.K. Ashok, K. Das, Tribol. Int. 43, 944(2010)10.1016/j.triboint.2009.12.057 |
| [13] | F. Velasco, W.M. Lima, N. Antón, J. Abenójar, J.M. Torralba, Tribol. Int. 36, 547(2003)10.1016/S0301-679X(02)00264-5 |
| [14] | C.C. Jackson, J.V. Degnan,Wood Proceedings of EUROMAT- Materials Development and Processing, vol. 8(Wiley, London, 1999), pp. 229–236 |
| [15] | E. Pagounis, V.K. Lindroos, Mater. Sci. Eng. A 246, 221(1998)10.1016/S0921-5093(97)00710-7 |
| [16] | S. Skolianos, T.Z. Kattamis, M. Chen, B.V. Chambers, Mater. Sci. Eng. A 183, 195(1994)10.1016/0921-5093(94)90903-2 |
| [17] | E. Pagounis, V.K. Lindroos, M. Talvitie, Metall. Mater. Trans. A 27, 4171(1996)10.1007/BF02595665 |
| [18] | M. Darabara, G.D. Papadimitriou, L. Bourithis, Surf. Coat. Technol. 202, 246(2007)10.1016/j.surfcoat.2007.05.023 |
| [19] | T.Z. Kattamis, T. Suganuma, Metall. Mater. Trans. A 128, 241(1990) |
| [20] | D. Vallauri, B. DeBenedetti, L. Jaworska, P. Klimczyk, M.A. Rodriguez, Int. J. Refract. Met. Hard Mater. 27, 996(2009)10.1016/j.ijrmhm.2009.07.003 |
| [21] | S.C. Tjong, K.C. Lau, Mater. Lett. 41, 153(1999)10.1016/S0167-577X(99)00123-8 |
| [22] | S.C. Tjong, K.C. Lau, Compos. Sci. Technol. 60, 1141(2000)10.1016/S0266-3538(00)00008-7 |
| [23] | I. Sulima, L. Jaworska, P. Wy?ga, M. Perek-Nowak, J. Achiev, Mater. Manuf. Eng. 48, 52(2011) |
| [24] | International Standard,Fine ceramics (advanced ceramics, advanced technical ceramics)—determination of friction and wear characteristics of monolithic ceramics by ball-on-disk method, ISO 20808:2007(E)(2004) |
| [25] | P. Figiel, S. Zimowski, P. Klimczyk, T. Dziwisz, L. Jaworska, Arch. Mater. Sci. Eng. 33(2), 83(2008) |
| [26] | F. James Shackelford, W. Alexander (eds.),CRC Materials Science and Engineering Handbook, 3rd edn. (CRC Press, Boca Raton, 2001), p. 509 |
| [27] | J.F. Archard, W. Hirst, Proc R Soc A 236, 397(1956)10.1098/rspa.1956.0144 |
| [28] | B.H. Li, Y. Liu, J. Li, J. Mater. Process. Technol. 210, 91(2010)10.1016/j.jmatprotec.2009.08.008 |
| [29] | S. Kumar, V. Subramanya Sarma, B.S. Murty, Mater. Sci. Eng. A 465, 160(2007)10.1016/j.msea.2007.02.117 |
/
| 〈 |
|
〉 |
WeChat