Acta Metallurgica Sinica (English Letters) >
Serrated Flow Model for Metallic Glasses under Compressive Loading
Received date: 2013-01-20
Revised date: 2013-04-27
Online published: 2013-09-13
A rheological model is proposed that incorporates the serrated flow nature of metallic glasses. It involves the process of the nucleation, propagation and the arrest of a shear bands in the samples subjected to compressive deformation at room temperature. Numerical resolution of the constitutive equations resulting from the model is compared with the stress-strain curve obtained from in-situ nano-compression test in SEM of Zr-based metallic glass. Parametric identification method was applied and enabled us to release the physical parameters of the model. The obtained results showed that the model is adequately valid to describe the experimental data and the almost adjustable model parameters are physically meaningful and comparable to literature.
M.A. Yousfi , K.Hajlaoui , Z. Tourki , A.R.Yavari . Serrated Flow Model for Metallic Glasses under Compressive Loading[J]. Acta Metallurgica Sinica (English Letters), 2013 , 26(5) : 503 -508 . DOI: 10.1007/s40195-013-0041-z
[1]Y. Kawamura, T. Shibata, A. Inoue and T. Masumoto, Scr.Mater. 37 (1997) 431.
[2]W.J. Kim, J.B. Lee and H.G. Jeong, Mater. Sci. Eng. A 428 (2006) 205.
[3]J. Schroers, T. Nguyen, S. O'Keeffe and A. Desai, Mater.Sci. Eng. A 449-451 (2007) 898.
[4]W.L Johnson, MRS Bull. 24 (1999) 42.
[5]C.A. Schuh, T.C. Hufnagel and U. Ramamurty, Acta Mater.55 (2007) 4067.
[6]F. Spaepen, Acta Mater. 25 (1977) 407.
[7]A. Inoue, Acta Mater. 48 (2000) 279.
[8]C.T. Liu, L. Heatherly, D.S. Easton, C.A. Carmichael, J.H.Schneibel, C.H. Chen, J.L. Wright, M.H. Yoo, J.A. Horton and A.Inoue, Mater. Trans. A 29 (1998) 1811.
[9]W.L. Johnson and K. Samwer, Phys. Rev. Lett. 95(2006) 195501.
[10]K. Hajlaoui, A.R. Yavari, B. Doisneau, A. LeMoulec, W.J. Botta, G. Vaughan, A.L. Greer, A. Inoue, W. Zhang and A. Kvick,Scr. Mater. 54 (2006) 1829.
[11]H.J. Leamy, T.T. Wang and H.S. Chen, Metall. Trans.3 (1972) 699.
[12]C.A. Schuch, T.C. Hufnagel and U. Ramamurty, Acta Mater.55 (2007) 4067.
[13]A. Inoue, W. Zhang, T. Tsurui, A.R. Yavari and A.L. Greer,Philos. Mag. Lett. 85 (2005) 221.
[14]A.H. Cottrell, Philos. Mag. 44 (1953) 829.
[15]K. Hajlaoui, B. Doisneau, A.R. Yavari, W.J. Botta, W.Zhang, G. Vaughan, {\AA. Kvick, A. Inoue and A.L. Greer, Mater.Sci. Eng. A 449-451 (2007) 105.
[16]K. Hajlaoui, A.R. Yavari, A. LeMoulec, W.J. Botta, F.G.Vaughan, J. Das, A.L. Greer and A. Kvick, J. Non-Cryst. Solids 35 (2007) 327.
[17]J. Fornell, E. Rossinyol, S. Surinach, M.D. Baro'et al,Scr. Mater. 62 (2010) 13.
[18]C.A. Schuh and T.G. Nieh. Acta Mater. 51 (2003)87.
[19]W.H. Jiang and M. Atzmon, J. Mater. Res. 18(2003) 755.
[20]G.P. Zhang, W. Wang, B. Zhang, J. Tan and C.S. Liu. Scr.Mater. 52 (2005) 1147.
[21]A.L. Greer and I.T. Walker, Mater. Sci. Forum 77(2002) 386.
[22]W. Li, B. Wei, T. Zhnag, D. Xing, L. Zhang and Y. Wang.Intermetallics 15 (2007) 706.
[23]P. de Hey, J. Sietsma and A. van den Beukel, Acta Mater.46 (1998) 5873.
[24]A.S. Argon, Acta Mater. 27 (1979) 47.
[25]K. Hajlaoui, Ph.D. Thesis, INPG Grenoble, 2005. (in France)
[26]J.C. Ye, J. Lu, Y. Yang and P.K. Liaw, Acta Mater.57 (2009) 6037.
[27]A. Dubach, F.H. Dalla Torre and J.F. Loffler, Acta Mater.57 (2009) 881.
[28]J.J. Kim, Y. Choi, S. Suresh and A.S. Argon, Science 295 (2002) 654.
[29]W.H. Jiang and M. Atzmon, Acta Mater. 51 (2003)4095.
[30]W.H. Jiang and M. Atzmon, Scr. Mater. 54 (2006)333.
[31]M.A. Yousfi, K. Hajlaoui, Z. Tourki and A.R. Yavari, J.Nanomater. 2011 (2011) No.36, DOI: 10.1155/2011/910962.
[32]J. Dongchan, T.C. Gross and J.R. Greer, Int. J. Plast.27 (2011) 858.
[33]C.Q. Chen, Y.T. Pei and J.T.M. De Hosson, Acta Mater.58 (2010) 189.
[34]R. Huang, Z. Suo, J.H. Prevost and W.D. Nix, J. Mech.Phys. Solids 50 (2002) 1011.
[35]R. Ekambaram, P. Thamburaja and N. Nikabdullah, Mech.Mater. 40 (2008) 487.
[36]K. Russew and F. Sommer, J. Non-Cryst. Solids 319(2003) 289.
[37]M. Bletry, Ph.D. Thesis, INPG Grenoble, 2004. (in France)
[38]M. Bletry, P. Guyot, Y. Brechet, J.J. Blandin and J.L.Soubeyroux, Intermetallics 12 (2004) 1051.
[39]B. van Aken, P. de Hey and J. Sietsma, Mater. Sci. Eng.A 278 (2000) 247.
[40]Y.L. Gao, J. Shen, J.F. Sun, D.M. Chen, G. Wang, R.H.Wang, D.W. Xing, H.Z. Xian and B. D. Zhou, Mater. Lett. 57(2003) 2341.
[41]K. Kristiakova and P. Svec, Mater. Sci. Eng. 304(2001) 343.
[42]J.J. Lewandowski and A.L. Greer, Nat. Mater. 5(2006) 15.
[43]K. Hajlaoui, M.A. Yousfi, Z. Tourki, G. Vaughan and A.R.Yavari, J. Mater. Sci. 45 (2010) 3344.
[44] K. Hajlaoui, M.A. Yousfi, I. Ouelhazi, K. Georgarakis, Z.Tourki,G. Vaughan and A.R. Yavari , Philos. Mag. Lett. 91(2011) 122.
[45]Y. Yokoyama, K. Fujita, A.R. Yavari and A. Inoue, Philos.Mag. Lett. 89 (2009) 322.
[46] H.M. Chen, J.C. Huang, S.X. Song, T.G. Nieh and J.S.C.Jang, Appl. Phys. Lett. 94 (2009) 141914
[47] A. Dubach, F.H. Dalla Torre and J.F. Loffler, Philos.Mag. Lett. 87 (2007) 695.
[48] B.A. Sun, S. Pauly, J. Tan, M. Stoica, W.H. Wang, U. Kuhn and J. Eckert, Acta Mater. 60 (2012) 4160
[49] D. Klaumuenzer, R. Maass and J.F. Loffler, J. Mater. Res.26 (2011) 1453.
[50] F.H. Dalla Torre, D. Klaumunzer, R. Maas and J.F.Loffler, Acta Mater. 58 (2010) 3742
/
| 〈 |
|
〉 |