Phase Field Simulation for Grains Evolution of 17-4PH Steel During Cyclic Heat Treatment

Yuan YOU; Mufu YAN; Chengsong ZHANG

doi:10.1007/s40195-012-0505-6

Acta Metallurgica Sinica (English Letters) >

2013 , Vol. 26 >Issue 2: 183 - 187

DOI: https://doi.org/10.1007/s40195-012-0505-6

Phase Field Simulation for Grains Evolution of 17-4PH Steel During Cyclic Heat Treatment

Yuan YOU ,
Mufu YAN ,
Chengsong ZHANG

Expand

National Key Laboratory for Precision Hot Processing of Metals, School of Materials Science and Engineering,Harbin Institute of Technology, Harbin 150001, China

Received date: 2012-03-24

Revised date: 2012-07-28

Online published: 2013-03-14

Supported by

National Natural Science Foundation of China (No.51071061) and NSAF(No.11176011)

Fold

Abstract

A phase field model is developed to simulate the grain evolution of 17-4PH steel during cyclic heat treatment (CHT). Our simulations successfully reproduce the grain morphologies of every CHT. In the process of every CHT, phase transformation recrystallization happens. The recrystallized grains appear mainly on the original grain boundaries. The average grain size of 13.2 μm obtained by 1040 ℃×1 h solution treatment for this experimental steel can be refined to 2.2μm after five CHT's. Furthermore, the effects of phenomenological parameters in our model are discussed.

Key words： Phase field model; Grain refinement; Recrystallization; 17-4PH Steel

Cite this article

Yuan YOU , Mufu YAN , Chengsong ZHANG . Phase Field Simulation for Grains Evolution of 17-4PH Steel During Cyclic Heat Treatment[J]. Acta Metallurgica Sinica (English Letters), 2013 , 26(2) : 183 -187 . DOI: 10.1007/s40195-012-0505-6

References

[1] Y.S. Seo, Y.B. Chun and S.K. Hwang, Comput. Mater. Sci. 43(2008) 512.

[2] B. Radhakrishnan, G. Sarma and T. Zacharia, Scr. Mater. 39(1998) 1639.

[3] F. Caleyo, T. Baudin and R. Penelle, Scr. Mater. 46 (2002) 829.

[4] M. Kazeminezhad, Mater. Sci. Eng. A 496 (2008) 389.

[5] P. Mukhopadhyay, M. Loeck and G. Gottstein, Acta Mater. 55(2007) 551.

[6] N. Xiao, C. Zheng, D. Li and Y. Li, Comput. Mater. Sci. 41(2008) 366.

[7] M. Qian and Z.X. Guo, Mater. Sci. Eng. A 365 (2004) 180.

[8] R. Ding and Z.X. Guo, Acta Mater. 49 (2001) 3163.

[9] Y. Guo, Y. Wang and D. Zhao, Acta Mater. 55 (2007) 401.

[10] R.B. Godiksen, Z.T. Trautt, M. Upmanyu, J. Schi鴗z, D.J. Jensen and S. Schmidt, Acta Mater. 55 (2007) 6383.

[11] Z. Chen, C.L. Chen and L.M. Hao, Acta. Metall. Sin. (Engl. Lett.)21 (2008) 444.

[12] Y. Zhang, C. Wang, D. Li and Y. Li, Acta. Metall. Sin. (Engl. Lett.)22 (2009) 197.

[13] M.A. Zaeem, H. Yin and S.D. Felicelli, J. Mater. Sci. Technol.28 (2012) 137.

[14] Y. Suwa, Y. Saito and H. Onodera, Mater. Sci. Eng. A 457(2007) 132.

[15] Y. Suwa, Y. Saito and H. Onodera, Comput. Mater. Sci. 44(2008) 286.

[16] M. Wang, B.Y. Zong and G. Wang, J. Mater. Sci. Technol. 24(2008) 829.

[17] T. Takaki, Y. Hisakuni, T. Hirouchi, A. Yamanaka and Y. Tomita, Comput.Mater. Sci. 45 (2009) 881.

[18] J.W. Cahn and J.E. Hilliard, J. Chem. Phys. 28 (1958) 258.

[19] L.Q. Chen and W. Yang, Phys. Rev. B 50 (1994) 15752.

[20] L.Q. Chen, Scr. Metall. 32 (1995) 115.

[21] C.E. Krill III and L.Q. Chen, Acta Mater. 50 (2002) 3059.

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References