Some Aspects of High Manganese Twinning-Induced Plasticity (TWIP) Steel, A Review

Liqing CHEN; Yang ZHAO and Xiaomei QIN

doi:10.1007/s40195-012-0501-x

Acta Metallurgica Sinica (English Letters) >

2013 , Vol. 26 >Issue 1: 1 - 15

DOI: https://doi.org/10.1007/s40195-012-0501-x

Some Aspects of High Manganese Twinning-Induced Plasticity (TWIP) Steel, A Review

Liqing CHEN ,
Yang ZHAO and Xiaomei QIN

Expand

State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, China

Online published: 2013-01-14

Fold

Abstract

High manganese twinning-induced plasticity (TWIP) steel is a new kind of structural material and possesses both high strength and superior plasticity and can meet the weight-lightening requirement for manufacturing vehicle body. The excellent formability of the TWIP steel comes from the extraordinary strain hardening effect during plastic deformation. The reduction of specific weight by aluminum alloying and strain hardening effect can lead to an effective weight reduction of the steel components, and provide a better choice for materials in vehicle body design. The TWIP effect in high Mn steels is generally associated with the successive work-hardening generated by twins and influenced by some factors, such as Mn content, Al addition revealed by stacking fault energy (SFE), grain size, deformation temperature and strain rate. The present review introduces some aspects of the TWIP steels relating to their physical metallurgy, influencing factors associated with their deformation mechanisms, and a prospect for the future investigation is also described. Moreover, as a potential candidate for replacing Ni-Cr austenitic stainless steel, researches on the oxidation behavior and corrosion resistance of Fe-Mn-Al-C system steels are also reviewed.

Key words： Twinning-induced plasticity (TWIP) steel; Physical metallurgy; Stacking fault energy; Mechanical properties; Oxidation behavior; Corrosion resistance

Cite this article

Liqing CHEN , Yang ZHAO and Xiaomei QIN . Some Aspects of High Manganese Twinning-Induced Plasticity (TWIP) Steel, A Review[J]. Acta Metallurgica Sinica (English Letters), 2013 , 26(1) : 1 -15 . DOI: 10.1007/s40195-012-0501-x

References

[1] R.A. Had?eld, Science 12 (1888) 284.

[2] V.H. Schumann, Neue H¨utte 17 (1972) 605.

[3] L. Remy and A. Pineau, Mater. Sci. Eng. 28 (1977) 99.

[4] T.W. Kim and Y.G. Kim, Mater. Sci. Eng. A 160 (1993) 13.

[5] O. Gr¨assel, G. Frommeyer, C. Derder and H. Hofman, J. Phys. IV 60 (1997) 383.

[6] O. Gr¨assel, L. Kr¨uger, G. Frommeyer and L. Meyer, Int. J. Plast. 16 (2000) 1391.

[7] G. Frommeyer, U. Br¨ux and P. Neumann, ISIJ Int. 43 (2003) 438.

[8] J.D. Yoo, S.W. Hwang and K.T. Park, Mater. Sci. Eng. A 508 (2009) 234.

[9] G. Kim, S.K. Kim, S.C. Kang and I.R. Sohn, CAMPISIJ 21 (2008) 593.

[10] J.L. Ham and R.E. Cairns, Prod. Eng. 29 (12) (1958) 50.

[11] Y.S. Chang and C.H. Shih, Acta Metall. Sin. 7 (1964) 285. (in Chinese)

[12] Y.S. Chang, C.H. Shih and Y.K. Li, Acta Metall. Sin. 8 (1965) 346. (in Chinese)

[13] J.W. Lee, C.C. Wu and T.F. Liu, Scr. Mater. 50 (2004) 1389.

[14] G.D. Tsay, C.L. Lin, C.G. Chao and T.F. Liu, Mater. Trans. 51 (2010) 2318.

[15] T.F. Liu and C.M. Wan, Scr. Metall. 19 (1985) 805.

[16] T.F. Liu and C.M. Wan, Scr. Metall. 19 (1985) 727.

[17] T.F. Liu and C.C. Wu, Scr. Metall. 23 (1989) 1087.

[18] B.C. de Cooman, K.G. Chin and J.K. Kim, In: M. Chiaberge (Ed.), New Trends and Developments in Automotive System Engineering, InTech, 2011, pp.101-128.

[19] W.S. Yang and C.M. Wan, J. Mater. Sci. 25 (1990) 1821.

[20] B.C. De Cooman, O. Kwon and K.G. Chin, Mater. Sci. Technol. 28 (2012) 513.

[21] J.K. Jung,O.Y.Lee, Y.K. Park,D.E.Kim,K.G.Jin, S.K. Kim and K.H. Song, J. Kor. Inst. Met. Mater. 46 (2008) 627.

[22] X.M. Qin, Plastic Deformation Mechanism and Microstructure, Mechaical Properties of Fe-Mn-Al-C TWIP Steels, Ph.D. Thesis, Northeastern University, 2011. (in Chinese)

[23] R. Ueji, N. Tsuchida, D. Terada, N. Tsuji, Y. Tanaka, A. Takemura and K. Kunishige, Scr. Mater. 59 (2008) 963.

[24] N. Tsuji, Y. Saito, S.H. Lee and Y. Minamino, Adv. Eng. Mater. 5 (2003) 338.

[25] N. Tsuji, Y. Ito, Y. Saito and Y. Minamino, Scr. Mater. 47 (2002) 893.

[26] S.H. Wang, Z.Y. Liu and G.D. Wang, Acta Metall. Sin. 45 (2009) 1083. (in Chinese)

[27] E. El-Danaf, S.R. Kalidindi and R.D. Doherty, Metall. Mater. Trans. A 30 (1999) 1223.

[28] S. Asgari, J. Mater. Process. Technol. 155-156 (2004) 1905.

[29] A.A.S. Mohammed, E.A. El-Danaf and A.K.A. Radwan, Mater. Sci. Eng. A 457 (2007) 373.

[30] S. Mahajan and G.Y. Chin, Acta Metall. 21 (1973) 1353.

[31] G. Dini, A. Naja?zadeh, R. Ueji and S.M. Monir-Vaghe?, Mater. Des. 31 (2010) 3395.

[32] G. Dini, A. Naja?zadeh, S.M. Monir-Vaghe? and R. Ueji, J. Mater. Sci Technol. 26 (2012) 181.

[33] J.D. Yoo and K.D. Park, Mater. Sci. Eng. A 496 (2008) 417.

[34] D.K. Wilsdorf, Mater. Sci. Eng. A 113 (1989)1.

[35] D.A. Hughes, Acta Metall. Mater. 41 (1993) 1421.

[36] S. Allain, J.P. Chateau, O.Bouaziz, S. Migot and N.Guelton, Mater. Sci. Eng. A 387–389 (2004) 158.

[37] S.H. Wang, Z.Y. Liu, W.N. Zhang and G.D. Wang, Acta Metall. Sin. 45 (2009) 573. (in Chinese)

[38] X.M. Qin, L.Q. Chen, H.S. Di and W. Deng, Acta Metall. Sin. 47 (2011) 1117. (in Chinese)

[39] A. Brahmi and R. Borrelly, Acta Mater. 45 (997) 1889.

[40] Z.Q. Wu, Z.Y. Tang, H.Y. Li and H.D. Zhang, Acta Metall. Sin. 48 (2012) 593. (in Chinese)

[41] X.M. Qin, L.Q. Chen, W. Deng and H. S. Di, Chin. J. Mater. Res. 25 (2011) 278. (in Chinese)

[42] F.Y. Lu, P. Yang, L. Meng, F.E. Cui and H. Ding, J. Mater. Sci. Technol. 27 ( 2011) 257.

[43] O. Bouaziz, S. Allain, C.P. Scott, P. Cugy and D. Bar-bier, Curr. Opin. Solid State Mater. Sci. 15 (4) (2011) 141.

[44] J.P. Hirth, Metall. Trans. A 1 (1970) 2367.

[45] G.B. Olson and M. Cohen, Metall. Trans. A 7 (1976) 1897.

[46] P.H. Adler, G.B. Olson and W.S. Owen, Metall. Trans. A 17 (1986) 1725.

[47] A.P. Miodownik and Z. Metallkunde, 89 (1998) 840.

[48] I.A. Yakubtsov, A. Airapour and D.D. Perovic, Acta Mater. 47 (1999) 1271.

[49] A.Dumay, J.P. Chateau, S. Allain, S. Migot, O. Bouaziz, Mater. Sci. Eng. A 483–484 (2008) 184.

[50] J.E. Jin and Y.K. Lee, Mater. Sci. Eng. A 527 (2009) 157..

[51] Y.J. Dai, D. Tang, Z.L. Mi, H.T. Jiang and J.C. Lu, J. Mater. Eng. (7) (2009) 39. (in Chinese)

[52] H.J. Lu,N.Q. Zhu,Y.L.He and L. Li, Trans. Mater. Heat Treat. 32 (12) (2011) 155. (in Chinese)

[53] Y.H. Rong, Q.P. Meng, G. He and Z.Y. Xu, J. Shanghai Jiaotong Univ. 37 (2003) 171. (in Chinese)

[54] S.H. Park, I.S. Chung and T.W. Kim, Oxid. Met. 49 (1998) 349.

[55] A. Inoue, Y. Kojima, T. Minemura and T. Masumoto, Metall. Trans. A 12 (1981) 1245.

[56] D.J. Schmatz, Trans. Am. Soc. Met. 52 (1960) 898.

[57] Y.G. Kim, J.K. Han and E.W. Lee, Metall. Trans. A 17 (1986) 2097.

[58] J. Charles, A. Berghezan, A. Lutts and P.L. Dancoisne, Met. Prog. 119 (1981) 71.

[59] J.G. Duh, J.W. Lee and C.J. Wang, J. Mater. Sci. 23 (1988) 2649.

[60] H. Schenck, E. Schmidtman and H. Muller, Arch. Eisenhuttenw 31 (1960) 121.

[61] P.R.S. Jackson and G.R. Wallwork, Oxid. Met. 21 (3–4) (1984) 135.

[62] P. Tomaszewicz and G.R. Wallwork, Corrosion 40 (4) (1984) 152.

[63] J.P. Sauer, R.A. Rapp and J.P. Hirth, Oxid. Met. 18 (5–6) (1982) 285.

[64] H. Erhart, R. Wang and R.A. Rapp, Oxid. Met. 21 (1–2) (1984) 81.

[65] C.H. Kao and C.M. Wan, J. Mater. Sci. 22 (1987) 3203.

[66] C.H. Kao and C.M. Wan, J. Mater. Sci. 23 (1988) 1943.

[67] S.C. Chang, J.Y. Liu and H.K. Juang, Corrosion 51 (5) (1995) 399.

[68] C.J. Wang and Y.C. Chang, Mater. Chem. Phys. 76 (2002) 151.

[69] C.S. Wang, C.Y. Tsai, C.G. Chao and T.F. Liu, Mater. Trans. 48 (2007) 2973.

[70] Y.H. Tuan, C.S. Wang, C.Y. Tsai, C.G. Chao and T.F. Liu, Mater. Chem. Phys. 114 (2009) 595.

[71] S.M. Zhu, S.C. Tjong, Scr. Mater. 36 (1997) 317.

[72] S.T. Shih, C.Y. Tsai and T.P. Perng, Corrosion 49 (1) (1993) 130.

[73] S.C. Chang, W.H. Weng, H.C. Chen, S.J. Lin and P.C.K. Chung, Wear 181–183 (1995) 511.

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References