Tribological behavior of magnetron sputtering CrMoN/MoS2 composite coatings

Yuelan DI; Zhihai CAI; Ping ZHANG; Zhen YANG; Qi LI; Wei SHEN

doi:10.11890/1006-7191-126-461

Acta Metallurgica Sinica (English Letters) >

2012 , Vol. 25 >Issue 6: 461 - 468

DOI: https://doi.org/10.11890/1006-7191-126-461

Tribological behavior of magnetron sputtering CrMoN/MoS₂ composite coatings

Yuelan DI ,
Zhihai CAI ,
Ping ZHANG ,
Zhen YANG ,
Qi LI ,
Wei SHEN

Expand

Department of Equipment Remanufacturing Engineering, Academy of Armored Forces Engineering, Beijing 100072, China

Online published: 2012-11-22

Fold

Abstract

CrMoN composite coatings were deposited on the surface of the stainless steel by magnetron sputtering, then were treated by low temperature ion sulfuration. FESEM equipped with EDX was adopted to analyze the morphologies and compositions of the surface, cross-section and worn scar of the sulfuration layer. The valence states of the ?lm surface were detected by XPS. The nano-hardness and nano-modulus of the layer were measured by a nano tester. The results of the friction and wear show that the CrMoN/MoS2 composite coating is a kind of ideal solid lubrication layer and possess an excellent antifriction and wear-resistance.

Key words： CrMoN/MoS2; Magnetron sputtering; Low temperature ion sulfurizing; Solid lubrication

Cite this article

Yuelan DI , Zhihai CAI , Ping ZHANG , Zhen YANG , Qi LI , Wei SHEN . Tribological behavior of magnetron sputtering CrMoN/MoS₂ composite coatings[J]. Acta Metallurgica Sinica (English Letters), 2012 , 25(6) : 461 -468 . DOI: 10.11890/1006-7191-126-461

References

[1] K. Rzepiejewska-Malyska, M. Parlinska-Wojtan, K. Wasmer, K. Hejduk and J. Michler, Micron 40(1) (2009) 22

[2] Q.M. Wang and K.H. Kim, J Vacuum Sci Technol A 26(5) (2008) 1258

[3] W. Ernst, J. Neidhardt, H. Willmann, B. Sartory, P.H. Mayrhofer and C. Mitterer, Thin Solid Film 517(2) (2008) 568

[4] K.P. Zheng, P. Liu, W. Li, F.C. Ma, L.H. Yang, X.K. Liu and X.H. Chen, Chin J Vacuum Sci Technol 31(5) (2011) 545

[5] G.A. Zhang, L.P. Wang, Q.X. Liu and Q.J. Xue, Tribology 31(2) (2011) 181

[6] Z.Y. Chen, W. Shi and J. Zhang, Shanghai Mater 32(4) (2010) 9

[7] B. Gu, J.P. Tu, X.H. Zheng, Y.Z. Yang and S.M. Peng, Surf Coat Technol 202 (2008) 2189

[8] M.R. Hilton and P.H. Fleischauer, Surf Coat Technol 54-55 (1992) 435

[9] L. Gizaire, B. Vacher, T. Le Mogne, L. Rapoport, A. Margolin and R. Tenne, Surf Coat Technol 160 (2002) 282

[10] H.D. Wang, B.S Xu, J.J. Liu and D.M. Zhuang, Mater Chem Phys 91 (2005) 494

[11] R.I. Amaro, R.C. Martins, J.O. Seabra, N.M. Renevier and D.G. Teer, Tribol Int 38 (2005) 423

[12] E. Arslan, F. B¨ulb¨ul, A. Alsaran, A. Celik and I. Efeoglu, Wear 259 (2005) 814

[13] M. Fenker, M. Balzer, H. Kappl and A. Savan, Surf Coat Technol 201 (2006) 4099

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References