Finite element simulations of deformation behavior in equal channel angular pressing using a rotated die

Yixuan TAN; Saiyi LI

doi:10.11890/1006-7191-125-357

Acta Metallurgica Sinica (English Letters) >

2012 , Vol. 25 >Issue 5: 357 - 364

DOI: https://doi.org/10.11890/1006-7191-125-357

Finite element simulations of deformation behavior in equal channel angular pressing using a rotated die

Yixuan TAN ,
Saiyi LI

Expand

1. School of Material Science and Engineering, Central South University, Changsha 410083, China
2. Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy, NY 12180, USA
3.Key Laboratory of Nonferrous Metal Materials Science and Engineering of the Ministry of Education, Central South University, Changsha 410012, China

Online published: 2012-10-26

Fold

Abstract

A new die design for equal channel angular pressing (ECAP) of square cross-section billet was proposed by a 45^°rotation of the inlet and outlet channels around the channel axes. ECAP utilizing the rotated and conventional dies was simulated in three dimensions using the finite element method. Conditions with di?erent material properties and friction coefficients were studied. The billet deformation behavior was evaluated in terms of the spatial distribution of equivalent plastic strain, plastic deformation zone and load history. The results show that the rotated die appears to produce billets with a smaller deformation inhomogeneity over the entire cross-section and a greater average of equivalent plastic strain at the cost of a slightly larger working load. The billet deformation enters into a steady state earlier in the case of the rotated die than the conventional die under the condition of a relatively large friction coefficient.

Key words： Equal channel angular pressing; Finite element method; Defor; mation behavior

Cite this article

Yixuan TAN , Saiyi LI . Finite element simulations of deformation behavior in equal channel angular pressing using a rotated die[J]. Acta Metallurgica Sinica (English Letters), 2012 , 25(5) : 357 -364 . DOI: 10.11890/1006-7191-125-357

References

[1] V.M. Segal, Mater Sci Eng A 197(2) (1995) 157

[2] V. Spuskanyuk, O. Davydenko, A. Berezina, O. Gangalo, L. Sennikova, M. Tikhonovsky and D. Spiridonov, J Mater Process Technol 210(13) (2010) 1709

[3] H.J. Rack and J.I. Qazi, Mater Sci Eng C 26(8) (2006) 1269

[4] S. Ferrasse, V.M. Segal, F. Alford, J. Kardokus and S. Strothers, Mater Sci Eng A 493(1-2) (2008) 130

[5] V.M. Segal, Mater Sci Eng A 386(1-2) (2004) 269

[6] D.J. Alexander, J Mater Eng Perform 16(3) (2007) 360

[7] J.C. Lee, H.K. Seok and J.Y. Suh, Acta Mater 50(16) (2002) 4005

[8] H. Utsunomiya, K. Hatsuda, T. Sakai and Y. Saito, Mater Sci Eng A 372(1-2) (2004) 199

[9] Y. Saito, H. Utsunomiya, H. Suzuki and T. Sakai, Scr Mater 42(12) (2000) 1139

[10] G.J. Raab, R.Z. Valiev, T.C. Lowe and Y.T. Zhu, Mater Sci Eng A 382(1-2) (2004) 30

[11] V.M. Segal, J Mater Process Technol 210(3) (2010) 542

[12] A. Azushima and K. Aoki, Mater Sci Eng A 337(1-2) (2002) 45

[13] V.M. Segal and L. Segal, US Patent 5600989 (11 February, 1997)

[14] V.S. Rao, B.P. Kashyap, N. Prabhu and P.D. Hodgson, Mater Sci Eng A 486(1-2) (2008) 341

[15] E. Hosseini and M. Kazeminezhad, Comput Mater Sci 44(3) (2009) 962

[16] E. Cerri, P.P. De Marco and P. Leo, J Mater Process Technol 209(3) (2009) 1550

[17] S. Li, M.A.M. Bourke, I.J. Beyerlein, D.J. Alexander and B. Clausen, Mater Sci Eng A 382(1-2) (2004) 217

[18] C. Simsir, P.I. Karpuz and C.H. Gur, Comput Mater Sci 48(3) (2010) 633

[19] A.R. Eivani and A. Karimi Taheri, J Mater Process Technol 182(1-2) (2007) 555

[20] A.R. Eivani and A. Karimi Taheri, Comput Mater Sci 41(3) (2008) 409

[21] Z. Duan and T.G. Langdon, Mater Sci Eng A 528(12) (2011) 4173

[22] I. Balasundar, M.S. Rao and T. Raghu, Mater Des 30(4) (2009) 1050

[23] N. Medeiros, L.P. Moreira, J.D. Bressan, J.F.C. Lins and J.P. Gouvea, Mater Sci Eng A 527(12) (2010) 2831

[24] V.M. Segal, R.E. Goforth and K.T. Hartwig, US Patent 5400633 (28 March, 1995)

[25] J.P. Mathieu, S. Suwas, A. Eberhardt, L.S. Toth and P. Moll, J Mater Process Technol 173(1) (2006) 29

[26] H. Li, S. Li and D. Zhang, Comput Mater Sci 49(2) (2010) 293

[27] Y. Iwahashi, M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon, Metall Mater Trans A 29(9) (1998) 2245

[28] Y.T. Zhu and T.C. Lowe, Mater Sci Eng A 291(1-2) (2000) 46

[29] V. Patil Basavaraj, U. Chakkingal and T.S. Prasanna Kumar, J Mater Process Technol 209(1) (2009) 89

[30] T. Suo, Y. Li, Y. Guo and Y. Liu, Mater Sci Eng A 432(1-2) (2006) 269

[31] A.V. Nagasekhar, S.C. Yoon, Y. Tick-Hon and H.S. Kim, Comput Mater Sci 46(2) (2009) 347

[32] ABAQUS/Standard Users Manual, Version 6.3 (Hibbitt, Karlsson and Sorensen Inc., 2002)

[33] H. Li, Master Thesis (South China University of Technology, Guangzhou, 2010)

[34] F. Djavanroodi and M. Ebrahimi, Mater Sci Eng A 527(4-5) (2010) 7593

[35] H.S. Kim, M.H. Seo and S.I. Hong, J Mater Process Technol 130(1) (2002) 497

[36] V.M. Segal, Mater Sci Eng A 271(1-2) (1999) 322

[37] D.N. Lee, Scr Mater 43(2) (2000) 115

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References