Microstructure and mechanical properties of low frequency electromagnetic casting 7075 aluminum alloy

  • YU Gao-Song ,
  • DIAO Zhi-Gao ,
  • CUI Jian-Zhong ,
  • GUO Jiang
Expand
  • Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang 110819, China

Received date: 2011-04-14

  Revised date: 2011-06-30

  Online published: 2012-04-11

Abstract

This work explores the microstructure of low frequency electromagnetic casting (LFEC) 7075 aluminum alloys and investigates the effect of heat treatment process on its mechanical properties $via$ the mechanical properties test, X-ray diffraction and transmission electron microscopy. It was found that the grains of LFEC ingot were finer and more evenly distributed than that of the conventional direct chill cast (DC) ingots. The microstructure of LFEC ingot extruded kept their original as-cast structure with small and fine grains. With the same extrusion ratio, the average grain diameters of LFEC and conventional DC extruded were about 10 and 20 µm, respectively. LFEC extruded also had a better aging property, since the regime of T6 treatment peak value aging was at 120 ℃ for 24 h, the tensile strength and hardness (HV) of the LFEC extruded were 673.50 MPa and 194.62, respectively, which were all higher than those of the conventional DC extruded, indicating that the process regime can be applied in the industrial production.

Cite this article

YU Gao-Song , DIAO Zhi-Gao , CUI Jian-Zhong , GUO Jiang . Microstructure and mechanical properties of low frequency electromagnetic casting 7075 aluminum alloy[J]. Acta Metallurgica Sinica (English Letters), 2012 , 25(2) : 160 -168 . DOI: 10.11890/1006-7191-122-160

References

[1] J.P. Birat and J. Chone, Ironmaking Steelmaking 110 (1983) 269

[2] C. Vives and R. Ricou, Metall Trans 16B (1985)377

[3] J.L. Meyer, J. Szkely, N. Elkaddah, C. Vives and R. Ricou, Metall Trans 18B (1987) 529

[4] L. Beitelman, Can Metall Q 38 (1999) 301

[5] K.H. Spitzer, G. Reiter and K. Schwerdtfeger, ISIJ Int 36 (1996) 487

[6] Q. Zhang and J.Z. Cui, Chin J Nonferrous Met 13(6) (2003) 1500 (in Chinese)

[7] Y.B. Zuo, J.Z. Cui and J. Dong, J Alloy Compd 402 (2005) 149

[8] J. Dong, J.Z. Cui and F.X. Yu, Metall Mater Trans A 35 (2004) 2487

[9] Z.H. Zhao, J.Z. Cui and Y.B. Zuo, J Northeastern Univ:Nat Sci 26(1) (2005) 51

[10] Y.B. Zuo, J.Z. Cui and J. Dong, Mater Sci Eng A 408 (2005) 176

[11] Y.B. Zuo, J.Z. Cui and Z.H. Zhao, Mater Sci Eng A 406 (2005) 286

[12] Z.H. Zhao, J. Wang, Y.B. Zuo and J.Z. Cui, Acta Metall Sin 43 (2007) 949 (in Chinese)

[13] Z.H. Zhao, J. Wang, Y.B. Zuo and J.Z. Cui, Acta Metall Sin 43 (2007) 956 (in Chinese)

[14] B.J. Zhang, J.Z. Cui, G.M. Lu, Q. Zhang and C.Y. Ban, Acta Metall Sin 38 (2002) 215 (in Chinese)

[15] B.J. Zhang, J.Z. Cui and G.M. Lu, Mater Lett 57 (2003) 1707
Outlines

/