Novel hard materials with controlled (W0.5Al0.5)C grain shapes: in-situ high pressure preparation and mechanical properties

  • ZHUHUI -Qiao
Expand
  • 1. State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy
    2. CAS Key Laboratory of Rare Earth on Advanced Materials and Valuable Utilization of Resources, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022,China

Received date: 2011-06-22

  Revised date: 2011-09-28

  Online published: 2012-02-16

Abstract

A novel hard material with various (W0.5Al0.5)C grain shapes was successfully prepared through mechanical alloying and in-situ high-pressure sintering process. X-ray diffraction apparatus and scanning electron microscopy were used to characterize the phase and the microstructures of the samples. The novel hard materials with ``fibrous", ``rounded" and ``plate-like" grains, which do not contain sharp edges, have the improved mechanical properties. The bulk boundless (W0.5Al0.5)C hard material with various (W0.5Al0.5)C grain shapes possesses good mechanical properties and light weight. The formation mechanism for the non-equilibrium (W0.5Al0.5)C grains during in-situ high-pressure sintering is also discussed.

Cite this article

ZHUHUI -Qiao . Novel hard materials with controlled (W0.5Al0.5)C grain shapes: in-situ high pressure preparation and mechanical properties[J]. Acta Metallurgica Sinica (English Letters), 2012 , 25(1) : 40 -46 . DOI: 10.11890/1006-7191-121-40

References

[1] V.K. Sarin, In: D.Y. Chin ed., 1981 ASM Materials Science Seminar (American Society for Metals, Metals Park, Ohio, 1981) p.253

[2] P. Klaer, F. Kiefer, K. Stjernberg, J.J. Oakes, Adv Powder Met Part Mater 3 (1999) 51

[3] H.V. Exner, Int Met Rev 4 (1979) 149

[4] M. Sommer, W.D. Schubert, E. Zobetz and P. Warbichler, Int J Refract Met Hard Mater 20 (2002) 41

[5] J.M.Yan, X.F. Ma, W. Zhao, H.G. Tang and C.J. Zhu, J Solid State Chem 177 (2004) 2265

[6] R.P. Herber, W.D. Schubert and B. Lux, Int J Refract Met Hard Mater 24 (2006) 360

[7] H. Pfau and W. Rix, Z Metallkd 45 (1954) 116

[8] D.N. French and D.A. Thomas, Symposium on Anisotropy in Single-crystal Refractory Compounds, In: Proc Int Symp Dayton, Vol.1 (Ohio, 1968) p.55

[9] D.V. Suetin, I.R. Shein and A.L. Ivanovskii, Phys B:Condensed Matter 403 (2008) 2654

[10] Z.G. Yao, J.S. Jacob and T.S. Sudarshan, Metal Powder Report 53 (1998) 32

[11] H.G. Tang, X.F. Ma, W. Zhao, J.W. Yan and R.J. Hong, J Alloy Compd 347 (2002) 228

[12] L.E. Toth, Transition Metal Carbides and Nitrides (Academic Press New York, 1971) p.29

[13] H.T. Kim, S.W. Choi, J.S. Kim, Y.S. Kwon and E.Y. Back, KORUS 2003 7 th Korea-Russia Int Symp Sci Technol, Vol.1 (Ulsan, Korea, 2003) p.56

[14] W.D. Schubert, H. Neumeister, G. Kinger and B. Lux, Int J Refract Met Hard Mater 16 (1998) 133
Outlines

/