Effect of W on microstructure of high strength and toughness steels

  • LUO Yan ,
  • SU Jie ,
  • YU Jun-Hua ,
  • XIE Gang ,
  • YANG Zhuo-Huo
Expand
  • 1. Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology,Kunming 650093, China
    2. Institute for Structural Materials, Central Iron and Steel Research Institute, Beijing 100081, China
    3. Department of Electrical Engineering, Henan Industrial School, Zhengzhou 450053, China

Received date: 2011-04-01

  Revised date: 2011-06-24

  Online published: 2011-12-22

Abstract

The effect of W on the microstructure and the mechanical properties of ultrahigh strength low alloy steels was carried out. The microstructure of 30Cr3Si2Mn2NiMoNb and 30Cr3Si2Mn2NiMoNbW steels under quenched conditions were investigated by metallographic microscope, scanning electron microscope (SEM), X-ray diffraction (XRD), and transmission electron microscope (TEM). Thermodynamic calculation was also conducted. The results showed that the addition of W made undissolved carbides more and finer, which exerted strong pinning force on migrating packet boundary and improved tensile strength significantly. M6C particles in 30Cr3Si2Mn2NiMoNb steel were disappeared above 1193 K, while the M6C particles in 30Cr3Si2Mn2NiMoNbW steel were disappeared above 1253 K, the calculation results were in agreement with the experimental.

Cite this article

LUO Yan , SU Jie , YU Jun-Hua , XIE Gang , YANG Zhuo-Huo . Effect of W on microstructure of high strength and toughness steels[J]. Acta Metallurgica Sinica (English Letters), 2011 , 24(6) : 423 -431 . DOI: 10.11890/1006-7191-116-423

References

[1] T.V. Philip and T.J. McCaffy,  Metals Handbook,  10th Ed (ASM International, Materials Park, OH, 1990).

[2] W.A. Van Der Sluys,  Eng Fract Mech  1(3) (1969) 447.

[3] T.Z. Kattamis, K.J. Bhansali, M. Levy, R. Adler and S.Ramalingam,  Mater Sci Eng  161(1)  (1993) 105.

[4] J.E. King,  J Mech Phys Solid  28(3-4)  (1980)191.

[5] A.G. Allten and P. Payson,  Trans ASM  45  (1953)498.

[6] R. Padmanabhan and W.E. Wood,  Mater Sci Eng  66(2) (1984) 125.

[7] C.X. Shi, B.L. Averbach and M. Cohen,  Trans ASM  48 (1956) 86.

[8] J.L. Wang, Z. Li, J.J. Jin, J.Z. Zhang, B. Su and L.X. Gu, J Aeronaut Mater  26(3)  (2006) 301.

[9] P. Zhong and L.R. Zhang,  J Aeronaut Mater  10(1) (1990) 8.

[10] C.G. Fan, H. Dong, J. Shi, Q.L. Yong, W.J. Hui, M.Q. Wang and Y.Q. Weng,  Heat Treatment Met  3(2)  (2007) 16.

[11] W.M. Garrison,  Metall Mater Trans A  17(4) (1986) 669.

[12] K.B. Lee, H.R. Yang and H. Kwon,  Metall Mater Trans A 32(7)  (2001) 1659.

[13] J.R. Paules, M.F. Dilmore and K.J. Handerhan,  Mater Sci Technol  (2)  (2005) 13.

[14] M.F. Dilmore and J.D. Ruhlman,  US Patent US7537727B2 (26 May 2009).

[15] X.M. Liu, C.X. Wang, R. Liu, W.M. Wang and S.Q. Wang,  Iron Steel  12(36)  (2001) 109.
Outlines

/