At great depth ratio, two methodologies based on the representative strain were improved to extract mechanical properties of metallic engineering structural materials from P-h curve of an indentation response. The improved aspects include: the combination of great ratio h1/R=0.1 and h2/R=0.4 replaced h1/R=0.01 and h2/R=0.06 (Cao's method) and h1/R=0.1 and h2/R=0.3 (Ogasawara's method); three types of metallic engineering structural materials with obviously different elastic modulus were dealt with to get their calculation parameters, respectively; a new parameter reflecting the effect of work-hardening exponent n was introduced to get the dimensionless function which is independent of n and a relationship between W/(h3σrS) and E*/(σrS)$ at great depth ratio. By using the results of finite element simulation, the efficiency and accuracy of the improved method have been proved, and it showed that the accuracy of the improved method is much better than the former method.
CHEN Jun
,
CHEN Huai-Ning
,
CHEN Jing
. Evaluation of mechanical properties of structural materials by a spherical indentation based on the representative strain--an improved algorithm at great depth ratio[J]. Acta Metallurgica Sinica (English Letters), 2011
, 24(5)
: 405
-414
.
DOI: 10.11890/1006-7191-115-405
[1] Y.T. Cheng and C.M. Cheng, Mater Sci Eng R 44(4-5) (2004) 91.
[2] Y.T. Cheng, Z.Y. Li and C.M. Cheng, Phi Mag A-Phys 82(10) (2002) 1821.
[3] Y.T. Cheng and C.M. Cheng, J Appl Phys 84(3) (1998) 1284.
[4] Z.Y Li, Y.T. Cheng, H.T. Yang and S. Chandrasekar, Surf Coat Technol 154(2-3) (2002) 124.
[5] Y.P. Cao, X.Q. Qian and N. Huber, Mater Sci Eng A-Struct 45(4) (2007) 1.
[6] Y.P. Cao and J. Lu, Acta Mater 52(13) (2004)4023.
[7] M.H. Zhao, N. Ogasawara, N. Chiba and X. Chen, Acta Mater 54(1) (2006) 23.
[8] N. Ogasawara, N. Chiba and X. Chen, J Mater Res 20(8) (2005) 2225.
[9] X. Chen N. Ogasawara, M.H. Zhao and N. Chiba, J Mech Phys Solids 55(8) (2007) 1618.
[10] L. Liu, N. Ogasawara, N. Chiba and X. Chen, J Mater Res 24(3) (2009) 784.
[11] N. Ogasawara, N. Chiba and X. Chen, Scr Mater 54(1) (2006) 65.
[12] N. Ogasawara, N. Chiba, M.H. Zhao and X. Chen, J Mater Res 22(4) (2007) 858.
[13] N. Ogasawara, M.H. Zhao, N. Chiba and X. Chen, J Mater Res 23(3) (2008) 598.
[14] N. Ogasawara, N. Chiba and X. Chen, Mech Mater 41(9) (2009) 1025.
[15] H. Lee, J.H. Lee and G.M. Pharr, J Mech Phys Solids 53(9) (2005) 2037.
[16] W.Y. Ni, Y.T. Cheng, C.M. Cheng and D.S. Grummon, J Mater Res 19(1) (2004) 149.
[17] J. Malzbender, J Eur Ceram Soc 23(9) (2003)1355.
[18] J. Gubicza, A. Juhasz and J. Lendvai, J Mater Res 11(12) (1996) 2964.
[19] Y.P. Cao, X.Q. Qian, J. Lu and Z.H. Yao, J Mater Res 20(5) (2005) 1194.
[20] D. Tabor, Oxford University Press (London, 1951)p.48.
[21] M. Dao, N. Chollacoop, K.J. Van Vliett, T.A. Venkatesh and S. Suresh, Acta Mater 49 (2001) 3899.
[22] Y.J. Park and G.M. Pharr, Thin Solid Films 447-448 (2004 ) 246.
[23] K.L. Johnson, Contact Mechanics (Cambridge University Press, Cambridge, 1994) p.176.
WeChat