Effect of Zener-Hollomon parameter on deformation microstructure in Fe-3%Si alloy

  • AN Feng-Hui
Expand
  • Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University,Shenyang 110819, China

Received date: 2010-04-12

  Revised date: 2010-10-12

  Online published: 2011-02-25

Abstract

Hot deformation of Fe-3%Si alloy within the temperature range of 1073--1473 K and strain rate range of 0.01--5 s-1 was carried out by compression test. Optical microscopy (OM), electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM) were used to characterize the deformation microstructure on various scales. Dynamic recovery is the dominant softening mechanism under all experimental conditions. A dynamic recovery region and partial dynamic recrystallization region can be distinguished according to Zener-Hollomon parameter (Z) based on OM observation. Furthermore, the quantitative description of subgrain size and boundary misorientation has been set up as a function of Zener-Hollomon parameter.

Cite this article

AN Feng-Hui . Effect of Zener-Hollomon parameter on deformation microstructure in Fe-3%Si alloy[J]. Acta Metallurgica Sinica (English Letters), 2011 , 24(1) : 1 -8 . DOI: 10.11890/1006-7191-111-1

References

[1] T. Takamiya, T. Obara, M. Muraki and M.Komatsubara,  Tetsu-to-Hagane  89  (2003) 22.

[2] M. Muraki, Y. Ozaki, T. Obara and T. Kan,  JMEPEG  5 (1996) 323.

[3] S.V.S. Narayana Murty, S. Torizuka and K. Nagai,  Mater Sci Eng  A410-411  (2005) 319.

[4] S.V.S. Narayana Murty, S. Torizuka, K. Nagai, N. Koseki and Y. Kogo,  Scr Mater  52  (2005) 713.

[5] S.V.S. Narayana Murty, S. Torizuka, K. Nagai, T. Kitai and Y. Kogo,  Scr Mater  53  (2005) 763.

[6] S.V.S. Narayana Murty, S. Torizuka, K. Nagai, T. Kitai and Y. Kogo,  Mater Sci Eng  A457  (2007) 162.

[7] G. Glover and C.M. Sellars,  Metall Trans  4 (1973) 765.

[8] E. Inoue and T. Sakai,  J Jpn Inst Met  55 (1991) 286.

[9] T. Obara, H. Takeuchi, T. Takamiya and T. Kan,  JMEPEG  2  (1992) 205.

[10] A. Orlova and I. Podstranska,  Mater Sci Eng A248  (1998) 56.

[11] J.J. Urcola and C.M. Sellars,  Acta Metall  35 (1987) 2649.

[12] W.M. Mao, Z.G. An and Y. Li,  Mater Sci China  2 (2008) 233.

[13] C.M. Sellars and W.J. McTegart,  Acta Metall  14 (1966) 1136.

[14] S. Akta, G.J. Richardson and C.M. Sellars,  ISIJ Int 45  (2005) 1666.

[15] A. Ohmorl, S. Torizuka, K. Nagai, K. Yamada and Y. Kogo, Tetsu-to-Hagane  88  (2002) 857.
Outlines

/