Numerical investigation of the rebounding and the deposition behavior of particles during cold spraying

  • ZHOU Xiang-Lin ,
  • WU Xiang-Kun ,
  • YU Jian-Guo ,
  • ZHANG Ji-Shan
Expand
  • State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China

Received date: 2010-07-16

  Revised date: 2010-10-08

  Online published: 2011-02-25

Abstract

Particles may rebound from a substrate surface during cold spraying, which affects the quality of the coating. In this paper, the rebound phenomenon and its consequences on deposition behavior have been analyzed using the finite element analysis software ANSYS/LS-DYNA version 970. In a range of particle velocities of 50--1000 m/s, increases of the impact velocity caused a rapid decline of the rebound coefficient R to a low point Rmin. After that, R began to rise slowly. Then the effect of the impact velocities and material properties on the rebound phenomenon were analyzed. Both the material strength and density influenced this rebound phenomenon. Four stages of the impact process and a model of strain distribution were proposed in detail to explain the rebound phenomenon.

Cite this article

ZHOU Xiang-Lin , WU Xiang-Kun , YU Jian-Guo , ZHANG Ji-Shan . Numerical investigation of the rebounding and the deposition behavior of particles during cold spraying[J]. Acta Metallurgica Sinica (English Letters), 2011 , 24(1) : 43 -53 . DOI: 10.11890/1006-7191-111-43

References

[1] A.P. Alkhimov, A.N. Papyrin, V.F. Kosarev,N.I. Nesterovich, M.M. Shushpanov and A.N. Papyrin,  US Patent US5302414  (1994).

[2] H. Assadi, F. Gartner, T. Stoltenhoff and H. Kreye, Acta Mater  51(15)  (2003) 4379.

[3] M. Grujicic, C.L. Zhao, W.S. DeRosset and D. Helfritch, Mater Design  25(8)  (2004) 681.

[4] S.V. Klinkov and V.F. Kosarev,  J Therm Spray Technol 15(3)  (2006) 364.

[5] C.J. Li, W.Y. Li, Y.Y. Wang, G.J. Yang and H. Fukanuma, Thin Solid Film  489(1-2)  (2005) 79.

[6] F. Raletz, M. Vardelle and G. Ezo,  Surf Coat Technol 201(5)  (2006) 1942.

[7] D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer and M.F. Smith,  J Therm Spray Technol  8(4)  (1999) 576.

[8] J. Wu, H. Fang, S. Yoon, C. Lee and H.J. Kim,  Mater Trans  47(7)  (2006) 1723.

[9] J. Wu, H. Fang, S. Yoon, H. Kim and C. Lee,  Scr Mater  54(4)  (2006) 665.

[10] T. Schmidt, F. Gartner, H. Assadi and H. Kreye,  Acta Mater  54(3)  (2006) 729.

[11] W. Li and W. Gao,  Appl Surf Sci  255(18) (2009) 7878.

[12] S.V. Klinkov, V.F. Kosarev and M. Rein,  Aerosp Sci Technol  9(7)  (2005) 582.

[13] X. Li, P.F. Dunn and R.M. Brach,  J Aerosol Sci 30(4)  (1999) 439.

[14] J.F. Molinari and M. Ortiz,  Int J Impact Eng  27(4) (2002) 347.

[15] O.V. Kim and P.F. Dunn,  J Aerosol Sci  38(5) (2007) 532.

[16] G. Bae, Y. Xiong, S. Kumar, K. Kang and C. Lee,  Acta Mater  56(17)  (2008) 4858.

[17] X.L. Zhou, X.Y. Su, H. Cui, H.H. Guo, X.K. Wu and J.S.Zhang,  Acta Metall Sin  44(11)  (2008) 1286 (in Chinese).

[18] Livermore Software Technology Corporation, LS-DYNA 970 Keyword User's manual, 2003.

[19] W.Y. Li, H. Liao, C.J. Li, H.S. Bang and C. Coddet, Appl Surf Sci  253(11)  (2007) 5084.

[20] M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset and D. Helfritch,  Appl Surf Sci  219  (2003) 211.

[21] C. Borchers, F. Gartner, T. Stoltenhoff and H. Kreye, Acta Mater  53(10)  (2005) 2991.

[22] C. Borchers, F. Gartner, T. Stoltenhoff, H. Assadi and H.Kreye,  J Appl Phys  93(12)  (2003) 10064.

[23] K. Kim, M. Watanabe, K. Mitsuishi, K. Iakoubovskii and S. Kuroda,  J Phys D: Appl Phys  42(6)  (2009) 1.
Outlines

/