Research paper

Ni-P-SiC composite coatings electroplated on carbon steel assisted by mechanical attrition

  • PING Zhao-Xia
Expand
  • 1) Key Laboratory of Beam Technology and Material Modification of Ministry of Education, College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875, China
    2) Beijing Key Laboratory for Corrosion, Erosion and Surface Technology, University of Science and Technology Beijing, Beijing 100083, China

Received date: 2009-10-27

  Revised date: 2009-12-14

  Online published: 2010-04-08

Abstract

Ni-P-SiC composite coatings were electroplated on carbon steel substrate assisted by mechanical attrition (MA). The MA action was conducted by dispersing glass balls on the cathodic surface, vibrating in the horizontal direction. The experimental results show that, under the assistant of MA action, the adhesion of Ni-P-SiC coating on the steel substrate can be improved effectively, and the Ni-P-SiC coatings exhibit a crystallized structure and Ni-P matrix can combine tightly with SiC particles, and the hardness and corrosion resistance of these coatings increase markedly. During heat treatment, the defects produced in conventional Ni-P-SiC composite coatings can be avoided assisted by MA action. Both of the wear resistance and corrosion resistance of these coatings can be improved further.

Cite this article

PING Zhao-Xia . Ni-P-SiC composite coatings electroplated on carbon steel assisted by mechanical attrition[J]. Acta Metallurgica Sinica (English Letters), 2010 , 23(2) : 137 -146 . DOI: 10.11890/1006-7191-102-137

References

[1] M.R. Kalantary, K.A. Holbrook and P.B. Wells, Trans Inst Metal Finish  71  (1993) 55.
[2] K.L. Lin and P.J. Lai,  Plat Surf Finish  76 (1989) 48.
[3] N. Feldstein, T. Lancsek, R. Barras, R. Spencer and N.Bailey,  Prod Finish  44  (1980) 65.
[4] E. Broszeit,  Thin Solid Films  95  (1982) 133.
[5] H. Xinmin and D. Zongang,  Trans Inst Metal Finish 70  (1992) 84.
[6] Z. Ning, Y. He and W. Gao,  Surf Coat Technol  202 (2008) 2139.
[7] Y. He, H. Fu, X. Li and W. Gao,  Scr Mater  58 (2008) 504.
[8] J. Gamby, P.L. Taberna, P. Simon, J.F. Fauvarque and M.Chesneau,  J Power Sources  101  (2001) 109.
[9] Jung-Suk Yoo and Su-Moon Park,  Anal Chem  73 (2001) 4060.
[10] X. Zhang, S.O. Pehkonen, N. Kocherginsky and G.A. Ellis, Corros Sci  44  (2002) 2507.
[11] Z. Ping, Y. He, C. Gu and T. Zhang,  Surf Coat Technol 202  (2008) 6023.
[12] Z. Guo. K.G. Keong and W. Sha,  J Alloy Compd  358 (2003) 112.
[13] J.N. Balaraju, T.S.N. Sankara Narayanan and S.K.Seshadri,  Mater Res Bull  41  (2006) 847.
[14] M. Palaniappa and S.K. Seshadri,  Mater Sci Eng A 638  (2007) 460.
[15] S. Budurov, V. Fotty and S. Toncheva,  Mater Sci Eng A   133  (1991) 452.
[16] I. Baskaran, T.S.N. Sankara Narayanan and A. Stephen, Mater Chem Phys  99  (2006) 117.
[17] N.M. Martyak and K. Drake,  J Alloy Compd  312 (2000) 30.

Outlines

/