Research paper

Amorphous forming ability of Co-X(X=Cr, Mo, W)  magnetic thin films

  • Gaowu QIN ,
  • Na XIAO ,
  • Bo YANG ,
  • Yuping REN ,
  • Wenli PEI ,
  • Xiang ZHAO
Expand
  • Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University,Shenyang 110004, China

Received date: 2009-01-14

  Revised date: 2009-03-27

  Online published: 2009-12-16

Abstract

Co-X(X=Cr, Mo, W) magnetic thin films were prepared by using DC magnetron sputtering, and their structures were examined by using X-ray diffraction (XRD). The amorphous forming ability (AFA) of the three alloy systems was discussed based on thermodynamic calculation and experiments. The results show that the Co-Mo thin films exhibit the largest AFA among them, and the Co-W thin films are condition-dependent amorphous while the Co-Cr thin films are hard to be amorphous, which is consistent with the thermodynamic calculation. The difference in AFA for the alloys of these three systems is finally ascribed to three main factors: differences in electronegativity, electron density and atomic size between Co and X elements.

Cite this article

Gaowu QIN , Na XIAO , Bo YANG , Yuping REN , Wenli PEI , Xiang ZHAO . Amorphous forming ability of Co-X(X=Cr, Mo, W)  magnetic thin films[J]. Acta Metallurgica Sinica (English Letters), 2009 , 22(6) : 415 -420 . DOI: 10.1016/S1006-7191(08)60117-9

References

[1] R. Hasegawa,  J Non-crystal Solids  287 (2001) 405.
[2] R.E. Jones Jr,  Acta Mater  46  (1998) 3805.
[3] A. Inoue, X.M. Wang and W. Zhang,  Rev Adv Mater Sci  18(1)  (2008) 1.
[4] K.J. Rao, S. Kumar and P. Vinatier,  Solid State Comm 129  (2004) 631.
[5] G.W. Qin, B. Yang, N. Xiao, Y.P. Ren, M. Jiang, X. Zhao and K. Oikawa,  Thin Solid Films  517  (2009) 2984.
[6] T. Matsumoto,  New Materials  (Maruzen Press, Tokyo,1987) p.187 (in Japanese).
[7] A.K. Niessen, A.R. Miedema, F.R. de Boer and R. Boom, Physica B  151  (1988) 401.
[8] B.S. Murty, S. Ranganathan and M.M. Rao,  Mater Sci Eng A  149  (1992) 231.
[9] A.W. Weeber,  J Phys F: Met Phys  17  (1987)809.
[10] Y. Maeda, M. Asahi and M. Seki,  Jpn J Appl Phys 25  (1986) L668.
[11] Y. Maeda and M. Asahi,  IEEE Trans Magn  MAG-23 (1987) 2061.
[12] Japan Institute of Metals: Handbook of Metals (Maruzen Press, Tokyo, 2004) p.8 (in Japanese).
[13] H. Zhang and B. Zhang,  Physica B  205  (1995)263.

Outlines

/