Acta Metallurgica Sinica (English Letters) >
Analysis of density and mechanical properties of high velocity compacted iron powder
Received date: 2009-01-09
Revised date: 2009-03-16
Online published: 2009-12-16
A new method for producing higher density PM parts, high velocity compaction (HVC), was presented in the paper. Using water atomized pure iron powder without lubricant admixed as the staring material, ring samples were compacted by the technique. Scanning electron microscopy (SEM) and a computer controlled universal testing machine were used to investigate the morphologies and the mechanical properties of samples, respectively. The relationships among the impact velocity, the green density, the sintered density, the bending strength and the tensile strength were discussed. The results show that with increasing impact velocity, the green density and the bending strength increase gradually, so the sintered density does. In addition, the tensile strength of sintered material is improved continuously with the sintered density enhancing. In the study, the sintered density of 7.545~g/cm3 and the tensile strength of 190~MPa are achieved at the optimal impact velocity of 9.8 m/s.
Jianzhong WANG , Haiqing YIN , Xuanhui QU . Analysis of density and mechanical properties of high velocity compacted iron powder[J]. Acta Metallurgica Sinica (English Letters), 2009 , 22(6) : 447 -453 . DOI: 10.1016/S1006-7191(08)60122-2
[1] J.W. Hagemeyer and J.A. Regalbuto, Int J Powder Metall 4 (1968) 18.
[2] P. Skoglund, M. Kejzelman and I. Hauer, Proc of the 2002 World Congress on Powder Metallurgy and Particulate Materials (Metal Powder Industries Federation, Orlando, USA, 2002).
[3] R.L. Orban, Romanian Reports in Physics 56 (2004) 505.
[4] D. Souriou, P. Goeuriot, O. Bonnefoy, G. Thomas and F.Dore, Powder Technology 190 (2009) 152.
[5] P. Doremus, F. Duwa, P. Francois, G. Puente and C.H.Allibert, Proc of the 2002 World Congress on Powder Metallurgy and Particulate Materials (Metal Powder Industries Federation,Orlando, USA, 2002).
[6] J.Z. Wang, X.H. Qu, H.Q. Yin, S.Y. Zhou and M.J. Yi, Materials for Mechanical Engineering 32 (2008) 5 (in Chinese).
[7] A. Skagerstrand, Proc of the 2002 World Congress on Powder Metallurgy and Particulate Materials (Metal Powder Industries Federation, Orlando, USA, 2002).
[8] P. Jonsen, H.A. Haggblad, L. Troive, J.Furuberg, S. Allroth and P. Skoglund, Mater Sci Forum 534-536 (2007) 289.
[9] P. Skoglund, Proc of the 2002 World Congress on Powder Metallurgy and Particulate Materials (Metal Powder Industries Federation, Orlando, USA, 2002).
[10] Y.Y. Li, T.L. Ngai, D.T. Zhang, Y. Long and W. Xia, J Mater Proc Technol 129 (2002) 354.
[11] D. Yarnton and T.J. Davies, Int J Powder Metall 8 (1972) 51.
[12] P.Y. Huang, Principles of Powder Metallurgy (Metallurgical Industry Press, Beijing, 1997) p.173 (in Chinese).
[13] C.Y. Wu and L.Y. Zhang, Mech Principles Powder Forming (Metallurgical Industry Press, Beijing, 2003) p.34 (in Chinese).
[14] Z.P. Zhou and X.P. Shen, Practical Technology of Machine Parts of Powder Metallurgy (Chemical Industries Press, Beijing, 2006) p.381 (in Chinese).
/
| 〈 |
|
〉 |
WeChat