MODELING OF DYNAMIC RECRYSTALLIZATION OF Ti6Al4V ALLOY USING A CELLULAR AUTOMATON APPROACH

Abstract

Abstract: A cellular automaton (CA) model is established to simulate dynamic recrystallization (DRX) in the $\beta$ single-phase field of Ti6Al4V alloy, and the kinetics during DRX processing has been analyzed. The model employed considers the influences of dynamic recovery, nucleation rate, strain rate and dislocation density on DRX, and practical deformation parameters, such as temperature, strain and strain rate on DRX have been considered in the simulation. The simulated DRX grain size and DRX grain shape agree well with the experimental results, which shows the availability and feasibility of the cellular automaton method for the simulation of DRX. The result of kinetics analysis of DRX reveals that the Avrami exponent is variable ranging from 2.4 to 2.9, which increases with the increase of strain rate.

Key words: Ti6Al4V alloy, Dynamic, recrystallization, Kinetics, Modeling, Cellular automaton

J.W. Zhao, H. Ding, W.J.Zhao, F.R. Cao, H.L. Hou, Z.Q. Li. MODELING OF DYNAMIC RECRYSTALLIZATION OF Ti6Al4V ALLOY USING A CELLULAR AUTOMATON APPROACH[J]. Acta Metallurgica Sinica (English Letters), 2008, 21(4): 260-268 .

[1]	Peng Liu, Hongliang Liu, Jun Liu, Chaoyun Yang, Hang Liu, Chengwu Zheng, Yikun Luan, Mingguang Li, Dianzhong Li. Manipulating the texture configuration and formability of interstitial-free steels through low-oxygen rare earth addition [J]. Metals Advances, 2026, 40(2): 101-109.
[2]	Fengyi Wang, Jingyuan Ma, Jiahao Liu, Hongjun Ji, Hongtao Chen. Development of an Antioxidation Copper Paste with Self-Reducing Copper Formate and Molecular Dynamics Analysis of Sintering Mechanisms [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1351-1360.
[3]	Sen Ge, Ben Niu, Zhen-Hua Wang, Qian-Fu Pan, Chao-Hong Liu, Qing Wang. Recrystallization Behavior and Mechanical Property of a Medium-Si 12%Cr Reduced Activation Ferritic/Martensitic Steel Cladding Tube During the Manufacture [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1385-1396.
[4]	Qi Pan, Shichong Zhou, Fangxi Wang, Peng Chen. Cross Slip and Twinning During Torsion Around $a$-Axis of Magnesium [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1410-1420.
[5]	Yong Hou, Haiyu Liu, Yao Wang, Yu Zhang, Yayun Zhang, Feng Liu. Thermo-Kinetic Understanding of the Correlation Between Austenite Reverse Transformation and Mechanical Properties for Medium Manganese Steel [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1195-1206.
[6]	Meisa Zhou, Kun-Ming Pan, Xiao-Ye Zhou, Shulong Ye, Shaojie Du, Hong-Hui Wu. Surface Wear Behavior of Nanograined NbMoTaW Refractory High-Entropy Alloys via Nano-scratching Simulations [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 946-960.
[7]	Bolun Han, Kai Feng, Zhuguo Li, Pan Liu, Yakai Zhao, Junnan Jiang, Yiwei Yu, Zhiyuan Wang, Kaifeng Ji. Experimental and Molecular Dynamics Simulation Study of Chemical Short-Range Order in CrCoNi Medium-Entropy Alloy Fabricated Using Laser Powder Bed Fusion [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 961-968.
[8]	Hongyang Zhang, Huihui Nie, Zhijian Li, Hongsheng Chen, Wei Liang, Liuwei Zheng. Evolution of Microstructure and Mechanical Properties of AZ31 Sheets with Different Initial Microstructures During the Corrugated Wide Limit Alignment Process [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 1012-1028.
[9]	Tianyi Zeng, Zirui Luo, Hao Chen, Wei Wang, Ke Yang. Flow Behavior and Dynamic Recrystallization Mechanism of CSS-42L Bearing Steel During Hot Compression Deformation [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 465-480.
[10]	Nafiseh Mollaei, Seyed Mahmood Fatemi, Mohammad Reza Aboutalebi, Seyed Hossein Razavi, Wiktor Bednarczyk. Microstructure, Texture, Mechanical Properties, and Corrosion Behavior of Biodegradable Zn-0.2Mg Alloy Processed by Multi-Directional Forging [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 507-525.
[11]	Ji-Peng Yang, Hai-Feng Zhang, Hong-Chao Ji, Nan Jia. Molecular Dynamics Simulations of Micromechanical Behaviours for AlCoCrFeNi_2.1 High Entropy Alloy during Nanoindentation [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(2): 218-232.
[12]	Yihong Liu, Zhuo Song, Muxi Li, Kangan Wang, Zhiping Xiong, Hua Hou, Yuhong Zhao. EBSD and Phase-Field Crystal Simulation Revealed the Inhibition of Al₃Ti on Crack Extention in TC4-2024Al Laminated Composites [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(2): 259-275.
[13]	Xiangru Guo, Jian Zhang, Tieqiang Kong, Junjie Shen, Qingjian Liu, Chaoyang Sun, Peipei Li. Unraveling the Discontinuous Dynamic Recrystallization of the TC17 Titanium Alloy during Hot Deformation by Crystal Plasticity Modeling [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2243-2264.
[14]	Yu Liu, Jinglian Du, Jianwei Xiao, Haotian Xue, Kexing Song, Feng Liu. Insights into Temperature and Strain Rate Dependent Deformation Behaviors of BCC Fe from Discrete Dislocation Dynamics Simulations [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2279-2288.
[15]	Yiran Xiong, Ziyu Zhang, Xinqiang Wu, Jibo Tan, Xiang Wang. Dissolution Behaviors of Corrosion Products on 316LN Stainless Steel in Simulated Shutdown Acid-Reducing Water Chemistry [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2289-2299.

MODELING OF DYNAMIC RECRYSTALLIZATION OF Ti6Al4V ALLOY USING A CELLULAR AUTOMATON APPROACH

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments