MODELING OF MICROSTRUCTURAL EVOLUTION IN MICROALLOYED STEEL DURING HOT FORGING PROCESS

Abstract

Abstract: The microstructural evolution of microalloyed steel during hot forging process was investigated using physical simulation experiments. The dynamic recrystallized fraction was described by modifying Avrami's equation, the parameters of which were determined by single hit compression tests. Double hit compression tests were performed to model the equation describing the static recrystallized fraction, and the obtained predicted values were in good agreement with the measured values. Austenitic grain growth was modeled as: Dinc5 = D05 + 1.6 × 1032 t·exp () using isothermal tests. Furthermore, an equation describing the dynamic recrystallized grain size was given as Ddyn = 3771·Z-0.2. The models of microstructural evolution could be applied to the numerical simulation of hot forging.

Key words: microalloyed forging steel, flow stress

J. Wang, J. Chen, Z. Zhao , X.Y. Ruan. MODELING OF MICROSTRUCTURAL EVOLUTION IN MICROALLOYED STEEL DURING HOT FORGING PROCESS[J]. Acta Metallurgica Sinica (English Letters), 2006, 19(4): 279-286 .

[1]	Tianyi Zeng, Zirui Luo, Hao Chen, Wei Wang, Ke Yang. Flow Behavior and Dynamic Recrystallization Mechanism of CSS-42L Bearing Steel During Hot Compression Deformation [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 465-480.
[2]	Di An, Ruizhi Wu, Xiang Wang, Legan Hou, Xiaochun Ma. Influence of Zn and Y on Hot Compression Behavior of Mg-Li-Zn-Y Alloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2134-2144.
[3]	Xuejian Lin, Hongjun Huang, Fuyu Dong, Yue Zhang, Xiaoguang Yuan, Bowen Zheng, Xiaojiao Zuo. Hot Deformation Behaviors in Ti-6Al-4V/(TiB+TiC) Composites [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(12): 1747-1757.
[4]	Kwang-Su Kim, Lin-Xiu Du, Hyo-sung Choe, Tae-Hyong Lee, Gyong-Chol Lee. Influence of Vanadium Content on Hot Deformation Behavior of Low-Carbon Boron Microalloyed Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(5): 705-715.
[5]	Wilasinee Kingkam, Cheng-Zhi Zhao, Hong Li, He-Xin Zhang, Zhi-Ming Li. Hot Deformation and Corrosion Resistance of High-Strength Low-Alloy Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(4): 495-505.
[6]	Gaoyong LIN,Xiaoyan ZHENG,Wei YANG,Di FENG,Dashu PENG. Study on the hot deformation behavior of Al-Zn-Mg-Cu-Cr aluminum alloy during multi-stage hot compression [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(2): 110-116.
[7]	F. Liu, D.B. Shan, Y. Lu , Y.Y. Yang. ARTIFICIAL NEURAL NETWORK MODEL OF CONSTITUTIVE RELATIONSHIP FOR 2A70 ALUMINUM ALLOY [J]. Acta Metallurgica Sinica (English Letters), 2005, 18(6): 719-723 .
[8]	H. Yan, J. Hua , R. Shivpuri. FLOW STRESS MODEL FOR HARD MACHINING OF AISI H13 WORK TOOL STEEL [J]. Acta Metallurgica Sinica (English Letters), 2005, 18(6): 741-748 .
[9]	H.T. Zhou, X.Q. Zeng, Q.D Wang , W.J. Ding. A Flow Stress Model for AZ61 Magnesium Alloy [J]. Acta Metallurgica Sinica (English Letters), 2004, 17(2): 155-160 .
[10]	X.H.Zhang, K.Osakada, X.Y.Ruan. RESEARCH ON THE WARM FORGING OF ALUMINUM ALLOYS：DEVELOPMENT OF A FORMULA TO DESCRIBE THE SOFTENING BEHAVIOR OF A2011 IN FORGING PROCESS [J]. Acta Metallurgica Sinica (English Letters), 2003, 16(2): 110-113 .
[11]	J. T.Niu,L.J.Sun and P.Karjalainen 1) Harbin Institute of Technology, Harbin 150001, China 2) University of Oulu, FIN-90571, Oulu, Finland. A NEURAL NETWORK-BASED MODEL FOR PREDICTION OF HOT-ROLLED AUSTENITE GRAIN SIZE AND FLOW STRESS IN MICROALLOY STEEL [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 521-530.
[12]	L. X. Li and D. S. Peng (Department of Materials Science and Engineering, Central SouthUniversity of Technology, Changsha 410083, China). DEVELOPMENT OF CONSTITUTE EQUATIONS FOR Ti-6Al-4V ALLOY UNDER HOT-WORKING CONDITION [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(1): 263-269.
[13]	J. Shen; S. S. Xie and J. H. tang (General Research Institute for Non - ferrous Metals,Beijing 100088, China). DYNAMIC RECOVERY AND DYNAMIC RECRYSTALLIZATION OF 7005 ALUMINIUM ALLOY DURING HOT COMPRESSION [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(1): 379-386.
[14]	J. T. Liu; H.B. Chang; R.H. Wu; T. Y. Hsu(Xu Zuyao) and X.R. Ruan( 1)Department of Plasticity Technology, Shanghai Jiao Tong University, Shanghai 200030, China 2)School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200030, China). PREDICTION OF FLOW STRESS OF HIGH-SPEED STEEL DURING HOT DEFORMATION BY USING BP ARTIFICIAL NEURAL NETWORK [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(1): 394-400.
[15]	J.M. Zhang;L.Z. Ma;J. Y. Zhuang;Q. Deng;J.H Du and Z. Y Zhong(Department of Superalloys, Central Iron & Steel Research Institute, Beijing 100081, China)P. Janschek(Thyssen Umformtechnik GMBH, 42859 Remscheid, Germany Manuscript received 26 August 1996). CONSTITUTIVE RELATIONSHIP OF SUPERALLOY IN718 [J]. Acta Metallurgica Sinica (English Letters), 1996, 9(6): 473-477.

MODELING OF MICROSTRUCTURAL EVOLUTION IN MICROALLOYED STEEL DURING HOT FORGING PROCESS

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments