SUPERPLASTICITY OF A SiCw/2024 Al COMPOSITE MADE BY PRESSURE INFILTRATION

Abstract

Abstract: The superplastic characteristics of the β-SiC whisker reinforced 2024 aluminum com-posite, fabricated by pressure infiltration and hot-rolling after extrusion, were inves-tigated. The composite has a fine grain size of about 1μm, and exhibits a maximumtensile elongation of 370% in the initial strain rate of 3.3× 10-3 s-1 at 788K. The su-perplastic deformation mechanism of the composite is thought to be grain boundary(interface) sliding accommodated by grain boundary diffusion of aluminum atom andan appropriate amount of liquid phase.

Key words: superplasticity, aluminum matrix composites, pressure infiltration

X.J. Xu, W. Wang, L. Cai. SUPERPLASTICITY OF A SiCw/2024 Al COMPOSITE MADE BY PRESSURE INFILTRATION[J]. Acta Metallurgica Sinica (English Letters), 2002, 15(5): 425-430 .

[1]	Peng Han, Wen Wang, Jun Cai, Jia Lin, Hubin Yang, Qianzhi Ma, Feng Gao, Ke Qiao, Fengming Qiang, Kuaishe Wang. Excellent superplasticity for lamellar microstructure in nugget of a double-sided friction stir welded Ti-4.5Al-3V-2Mo-2Fe alloy joint [J]. Metals Advances, 2026, 40(2): 110-123.
[2]	H. Q. Dai, N. Li, L. H. Wu, J. Wang, P. Xue, F. C. Liu, D. R. Ni, B. L. Xiao, Z. Y. Ma. Low-Temperature Superplastic Deformation Behavior of Bimodal Microstructure of Friction Stir Processed Ti-6Al-4V Alloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1559-1569.
[3]	Rashad A. Al-Hammadi, Rui Zhang, Chuanyong Cui, Xipeng Tao, Yizhou Zhou. Deformation Mechanism and Fracture Behavior of a Coarse-Grain Ni-Co-Based Superalloy During Superplasticity [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(11): 2024-2034.
[4]	Rashad A. Al-Hammadi, Rui Zhang, Chuanyong Cui, Zijian Zhou, Yizhou Zhou. Revealing the Void Formation Mechanism during Superplastic Deformation of a Fine-Grained Ni-Co-Base Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(5): 915-920.
[5]	Xicai Luo, Haolin Liu, Limei Kang, Jielin Lin, Datong Zhang, Dongyang Li, Daolun Chen. Achieving Superior Superplasticity in a Mg-6Al-Zn Plate via Multi-pass Submerged Friction Stir Processing [J]. Acta Metallurgica Sinica (English Letters), 2022, 35(5): 757-762.
[6]	Rong Xu, Ruidi Li, Tiechui Yuan, Hongbin Zhu, Ping Li. Microstructure and Mechanical Properties of TiC-Reinforced Al-Mg-Sc-Zr Composites Additively Manufactured by Laser Direct Energy Deposition [J]. Acta Metallurgica Sinica (English Letters), 2022, 35(3): 411-424.
[7]	Xiaonan Li, Zhenyu Liu, Zhixin Dai, Hui Feng, Bolyu Xiao, Dingrui Ni, Quanzhao Wang, Dong Wang, Zongyi Ma. Wear Behavior of the Uniformly Dispersed Carbon Nanotube Reinforced 6061Al Composite Fabricated by Milling Combined with Powder Metallurgy [J]. Acta Metallurgica Sinica (English Letters), 2022, 35(11): 1765-1776.
[8]	Yu-Ning Zan, Yang-Tao Zhou, Xiao-Nan Li, Guo-Nan Ma, Zhen-Yu Liu, Quan-Zhao Wang, Dong Wang, Bo-Lv Xiao, Zong-Yi Ma. Enhancing High-Temperature Strength and Thermal Stability of Al₂O₃/Al Composites by High-Temperature Pre-treatment of Ultrafine Al Powders [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 913-921.
[9]	Wen Wang, Peng Han, Pai Peng, Ting Zhang, Qiang Liu, Sheng-Nan Yuan, Li-Ying Huang, Hai-Liang Yu, Ke Qiao, Kuai-She Wang. Friction Stir Processing of Magnesium Alloys: A Review [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(1): 43-57.
[10]	Tian-Long Zhang, Toko Tokunaga, Munekazu Ohno, Mi-Lin Zhang, Kiyotaka Matsuura. Fabrication of Al-Coated Mg-Li Alloy Sheet and Investigation of Its Properties [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(2): 169-177.
[11]	Sahayam Joyson Abraham, Isaac Dinaharan, Jebaraj David Raja Selvam, Esther Titilayo Akinlabi. Microstructural Characterization and Tensile Behavior of Rutile (TiO₂)-Reinforced AA6063 Aluminum Matrix Composites Prepared by Friction Stir Processing [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 52-62.
[12]	Gang Wang, Zbigniew H. Stachurski. A Concordant Shift Model for Flow in Bulk Metallic Glasses [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(2): 134-139.
[13]	Geng Lin, Huang Lujun. High Temperature Properties of Discontinuously Reinforced Titanium Matrix Composites: A Review [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(5): 787-797.
[14]	Nie Junhui, Fan Jianzhong, Zhang Shaoming, Wei Shaohua, Zuo Tao, Ma Zili, Xiang Zhaobing. Tensile and Fracture Properties of 15 vol% SiC_p/2009Al Composites Fabricated by Hot Isostatic Pressing and Hot Extrusion Processes [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(5): 875-884.
[15]	W.B. Han, K.F. Zhang, B. Wang, D.Z. Wu. Superplasticity and Diffusion Bonding of IN718 Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2007, 20(4): 307-312 .

SUPERPLASTICITY OF A SiCw/2024 Al COMPOSITE MADE BY PRESSURE INFILTRATION

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments