Acta Metallurgica Sinica (English Letters) ›› 2014, Vol. 27 ›› Issue (6): 1105-1113.DOI: 10.1007/s40195-014-0132-5
• Orginal Article • Previous Articles Next Articles
Li Yang, Ma Yuantai, Zhang Bin, Lei Bing, Li Ying(
)
Received:2014-02-17
Revised:2014-04-03
Online:2014-09-11
Published:2015-07-23
Li Yang, Ma Yuantai, Zhang Bin, Lei Bing, Li Ying. Enhancement the Adhesion between Epoxy Coating and Rusted Structural Steel by Tannic Acid Treatment[J]. Acta Metallurgica Sinica (English Letters), 2014, 27(6): 1105-1113.
| C | S | P | Mn | Si | Cu | Fe |
|---|---|---|---|---|---|---|
| 0.176 | 0.023 | 0.019 | 0.570 | 0.233 | 0.033 | Bal. |
Table 1 Chemical composition of the structural steel Q235 (in wt%)
| C | S | P | Mn | Si | Cu | Fe |
|---|---|---|---|---|---|---|
| 0.176 | 0.023 | 0.019 | 0.570 | 0.233 | 0.033 | Bal. |
| Factor | Level 1 | Level 2 | Level 3 | Level 4 |
|---|---|---|---|---|
| Tannic acid concentration (g/L) | 5 | 10 | 15 | 20 |
| Sodium molybdate concentration (g/L) | 1 | 2 | 3 | 4 |
| Citric acid concentration (g/L) | 1 | 2 | 3 | 4 |
| Mixture of alcohol concentration (g/L) | 5 | 10 | 15 | 20 |
| Temperature (°C) | 20 | 25 | 30 | 35 |
Table 2 Levels of the factors used in the experiments
| Factor | Level 1 | Level 2 | Level 3 | Level 4 |
|---|---|---|---|---|
| Tannic acid concentration (g/L) | 5 | 10 | 15 | 20 |
| Sodium molybdate concentration (g/L) | 1 | 2 | 3 | 4 |
| Citric acid concentration (g/L) | 1 | 2 | 3 | 4 |
| Mixture of alcohol concentration (g/L) | 5 | 10 | 15 | 20 |
| Temperature (°C) | 20 | 25 | 30 | 35 |
| Experiment nos. | Tannic acid concentration (g/L) | Sodium molybdate concentration (g/L) | Citric acid concentration (g/L) | Mixture of alcohol concentration (g/L) | Temperature (°C) | Adhesion (MPa) |
|---|---|---|---|---|---|---|
| 1 | 5 | 1 | 1 | 5 | 20 | 2.36 ± 0.22 |
| 2 | 5 | 2 | 2 | 10 | 25 | 2.89 ± 0.49 |
| 3 | 5 | 3 | 3 | 15 | 30 | 1.83 ± 0.65 |
| 4 | 5 | 4 | 4 | 20 | 35 | 4.22 ± 0.22 |
| 5 | 10 | 1 | 2 | 15 | 35 | 1.94 ± 0.48 |
| 6 | 10 | 2 | 1 | 20 | 30 | 2.70 ± 0.47 |
| 7 | 10 | 3 | 4 | 5 | 25 | 2.80 ± 0.51 |
| 8 | 10 | 4 | 3 | 10 | 20 | 2.11 ± 0.20 |
| 9 | 15 | 1 | 3 | 20 | 25 | 3.27 ± 0.64 |
| 10 | 15 | 2 | 4 | 15 | 20 | 2.76 ± 0.34 |
| 11 | 15 | 3 | 1 | 10 | 35 | 3.70 ± 0.70 |
| 12 | 15 | 4 | 2 | 5 | 30 | 1.95 ± 0.50 |
| 13 | 20 | 1 | 4 | 10 | 30 | 2.36 ± 0.21 |
| 14 | 20 | 2 | 3 | 5 | 35 | 2.39 ± 0.56 |
| 15 | 20 | 3 | 2 | 20 | 20 | 2.22 ± 0.33 |
| 16 | 20 | 4 | 1 | 15 | 25 | 3.42 ± 0.44 |
Table 3 Adhesion strength results of the orthogonal tests
| Experiment nos. | Tannic acid concentration (g/L) | Sodium molybdate concentration (g/L) | Citric acid concentration (g/L) | Mixture of alcohol concentration (g/L) | Temperature (°C) | Adhesion (MPa) |
|---|---|---|---|---|---|---|
| 1 | 5 | 1 | 1 | 5 | 20 | 2.36 ± 0.22 |
| 2 | 5 | 2 | 2 | 10 | 25 | 2.89 ± 0.49 |
| 3 | 5 | 3 | 3 | 15 | 30 | 1.83 ± 0.65 |
| 4 | 5 | 4 | 4 | 20 | 35 | 4.22 ± 0.22 |
| 5 | 10 | 1 | 2 | 15 | 35 | 1.94 ± 0.48 |
| 6 | 10 | 2 | 1 | 20 | 30 | 2.70 ± 0.47 |
| 7 | 10 | 3 | 4 | 5 | 25 | 2.80 ± 0.51 |
| 8 | 10 | 4 | 3 | 10 | 20 | 2.11 ± 0.20 |
| 9 | 15 | 1 | 3 | 20 | 25 | 3.27 ± 0.64 |
| 10 | 15 | 2 | 4 | 15 | 20 | 2.76 ± 0.34 |
| 11 | 15 | 3 | 1 | 10 | 35 | 3.70 ± 0.70 |
| 12 | 15 | 4 | 2 | 5 | 30 | 1.95 ± 0.50 |
| 13 | 20 | 1 | 4 | 10 | 30 | 2.36 ± 0.21 |
| 14 | 20 | 2 | 3 | 5 | 35 | 2.39 ± 0.56 |
| 15 | 20 | 3 | 2 | 20 | 20 | 2.22 ± 0.33 |
| 16 | 20 | 4 | 1 | 15 | 25 | 3.42 ± 0.44 |
| Factor level | Tannic acid concentration | Sodium molybdate concentration | Citric acid concentration | Mixture of alcohol concentration | Temperature |
|---|---|---|---|---|---|
| Level 1 | 2.825 | 2.482 | 3.045 | 2.375 | 2.362 |
| Level 2 | 2.388 | 2.685 | 2.250 | 2.765 | 3.095 |
| Level 3 | 2.920 | 2.638 | 2.400 | 2.487 | 2.210 |
| Level 4 | 2.598 | 2.925 | 3.035 | 3.103 | 3.063 |
| Maximum deviation | 0.532 | 0.443 | 0.795 | 0.728 | 0.885 |
| Factor level | Tannic acid concentration | Sodium molybdate concentration | Citric acid concentration | Mixture of alcohol concentration | Temperature |
|---|---|---|---|---|---|
| Level 1 | 2.825 | 2.482 | 3.045 | 2.375 | 2.362 |
| Level 2 | 2.388 | 2.685 | 2.250 | 2.765 | 3.095 |
| Level 3 | 2.920 | 2.638 | 2.400 | 2.487 | 2.210 |
| Level 4 | 2.598 | 2.925 | 3.035 | 3.103 | 3.063 |
| Maximum deviation | 0.532 | 0.443 | 0.795 | 0.728 | 0.885 |
Fig. 1 Effect plots of the adhesion strength for each level of the control factor
Fig. 2 FTIR spectrum of the rust layer
Fig. 3 FTIR spectrum of the sample after tannic converter treatment
Fig. 4 XPS core level C1s spectrum of the tannic conversion layer
Fig. 5 XPS core level Mo3d spectrum of the tannic conversion layer
Fig. 6 Surface a; cross-section b morphologies of the rust layer
Fig. 7 Surface morphology of the tannic conversion layer a; EDX result of the selected area in a b
Fig. 8 Cross-section morphology of the tannic conversion layer
Fig. 9 Failure morphologies without the tannic converter treatment after the adhesion test measurement: a failure substrate; b relative test dolly
Fig. 10 Failure morphology with the tannic converter treatment after the adhesion test measurement: a failure substrate; b relative test dolly
Fig. 11 FTIR spectrum of the components adhered to the test dolly with the tannic converter treatment
Fig. 12 Micro morphology of the failure substrate with the tannic converter treatment
| [1] | L.K. Aggarwal, P.C. Thapliyal, S.R. Karade,Prog. Org. Coat. 59, 76(2007) |
| [2] | L.M. Ocampo,I.C.P. Margarit, O.R. Mattos, S.I. Córdoba-de-Torresi, F.L. Fragata, Corros. Sci. 46, 1515(2004) |
| [3] | S.N. Roselli,B. del Amo, R.O. Carbonari, A.R. Di Sarli, R. Romagnoli, Corros. Sci. 74, 194(2013) |
| [4] | A. Collazo, X.R. Novoa, C. Perez, B. Puga, Electrochim.Acta 53, 7565 (2008) |
| [5] | A.A. Rahim, M.J. Kassim, E. Rocca, J. Steinmetz,Corros. Eng., Sci. Technol. 46, 425(2011) |
| [6] | A.A. Rahim, E. Rocca, J. Steinmetz, M.J. Kassim,Corros. Sci. 50, 1546(2008) |
| [7] | J.A. Jaen, L. Gonzalez, A. Vargas, G. Olave, Hyperfine Interact. 148-149 , 227 (2003) |
| [8] | A.A. Rahim, E. Rocca, J. Steinmetz, M.J. Kassim, R. Adnan, M.S. Ibrahim,Corros. Sci. 49, 402(2007) |
| [9] | A. Collazo, X.R. Novoa, C. Perez, B. Puga, Electrochim.Acta 55, 6156 (2010) |
| [10] | J.A. Jaen, E.Y. Arauz, J. Iglesias, Y. Delgado, Hyperfine Interact.148-149, 199 (2003) |
| [11] | C.A. Barrero, L.M. Ocampo, C.E. Arroyave,Corros. Sci. 43, 1003(2001) |
| [12] | ISO 8501-1, Preparation of Steel Substrates Before Application of Paints and Related Products—Visual Assessment Cleanliness—part 1: Rust Grades and Preparation Grades of Uncoated Steel Substrates and of Steel Substrates After Overall Removal of Previous Coatings (ISO, Geneva, 2007) |
| [13] | ASTM B 117-95, Standard practice for operating salt spray (Fog) apparatus, in Annual Book of ASTM Standards, Vol.03.02, (ASTM, West Conshohocken, 1996) |
| [14] | Y.T. Ma, Ph.D. Thesis, Institute of Metal Research(Chinese Academy of Sciences, Shenyang, 2009) |
| [15] | ISO 2808, Paints and Varnishes—Determination of FilmThickness, Classification (ISO, Geneva, 1997) |
| [16] | L. Tao, S.Z. Song, S.Y. Wang, X.Y. Zhang, M. Liu, F. Lu, Mater. Sci.Eng., A 476, 210 (2008) |
| [17] | G.Z. Liang, J.R. Meng, L. Zhao,Polym. Plast. Technol. Eng. 43, 341(2004) |
| [18] | J.B. Bajat, I. Milosev, Z. Jovanovic, V.B. Miskovic-Stankovic, Appl. Surf. Sci. 256, 3508(2010) |
| [19] | S.R. Rau, B. Vengadaesvaran, K. Ramesh, A.K. Arof, J.Adhesion 88, 282 (2012) |
| [20] | Z. Qian, S. Zhou, R. Liu, X. Hu, F. Zhao, L. Niu,China Patent CN102383122-A, (2012) |
| [21] | Y.W. Wei, T. Liu, K. Qiu, Y. Xie,China Patent WO2012024680-A1, (2012) |
| [22] | ISO 4624, Paints and Varnishes—Pull-off Test For Adhesion(ISO, Geneva, 2002) |
| [23] | I. Díaz, B. Chico,D. de la Fuente, J. Simancas, J.M. Vega, M. Morcillo, Prog. Org. Coat. 69, 278(2010) |
| [24] | X.Y. Zhang, P. Chen, X.T. Kang, M.X. Chen, Q. Wang, J. Appl.Polym.Sci. 123, 2945(2012) |
| [25] | A. Raman, B. Kuban, A. Razvan,Corros. Sci. 32, 1295(1991) |
| [26] | J. Iglesias, E.G.D. Saldana, J.A. Jaen, Hyperfine Interact. 134, 109(2001) |
| [27] | C.H. Bichler, H.C. Langowski, M. Bischoff, U. Moosheimer, Paper present in 39th Annual Technical Conference of the Society of Vacuum Coaters, 5-10 May 1996, Philadelphia, (1996) |
| [28] | M. Anwar, C.A. Hogarth, R. Bulpett, J. Mater.Sci. 24, 3087(1989) |
| [29] | D.C. Smith, B. Mcenaney,Corros. Sci. 19, 379(1979) |
| [30] | L.L. Zhai, G.P. Ling, Y.W. Wang,Int. J. Adhes. Adhes. 28, 23(2008) |
| [31] | A.A. Rahim, J. Kassim,Recent Pat. Mater. Sci. 1, 223(2008) |
| [32] | A.A. Rahim, E. Rocca, J. Steinmetz, M.J. Kassim, M.S. Ibrahim, H. Osman,Food Chem. 107, 200(2008) |
| [33] | O. Lahodny-Sarc, F. Kapor,Mater. Corros. 53, 264(2002) |
| [1] | Yang Zhao, Bo He, Jinliang Yang, Yongxiang Liu, Tao Zhang, Fuhui Wang. Critical Role of Intermetallic Particles in the Corrosion of 6061 Aluminum Alloy and Anodized Aluminum Used in Semiconductor Processing Equipment [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 904-924. |
| [2] | Xiang Fei, Naicheng Sheng, Zhaokuang Chu, Han Wang, Shijie Sun, Yuping Zhu, Shigang Fan, Jinjiang Yu, Guichen Hou, Jinguo Li, Yizhou Zhou, Xiaofeng Sun. Design Strategy for Synergistic Strengthening of W and Al in High-W Superalloys [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 1057-1068. |
| [3] | Jing-Peng Xiong, Yi-Qi Zeng, Jin-Long Liu, Wei-Cheng Wang, Lan Luo, Yong Liu. Interface Design Strategy for GNS/AZ91 Composites with Semi-Coherent Structure [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(3): 467-483. |
| [4] | Yunxuan Zhou, Wenjun Tian, Quan Dong, Hailian Wang, Jun Tan, Xianhua Chen, Kaihong Zheng, Fusheng Pan. A First-principles Study on the Adhesion Strength, Interfacial Stability, and Electronic Properties of Mg/Mg2Y Interface [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(3): 537-550. |
| [5] | Gang Niu, Rui Yuan, R. D. K. Misra, Na Gong, Zhi-Hui Zhang, Hao-Xiu Chen, Hui-Bin Wu, Cheng-Jia Shang, Xin-Ping Mao. Effect of La on the Corrosion Behavior and Mechanism of 3Ni Weathering Steel in a Simulated Marine Atmospheric Environment [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(2): 308-324. |
| [6] | Hu-Yue Wang, Hong-Liang Ming, Dong-Ceng Hou, Jian-Qiu Wang, Wei Ke, En-Hou Han. Using Small Punch Test to Investigate the Mechanical Properties of X42 Exposed to Gaseous Hydrogen: Effect of Pressure, Pre-charge Time, Punch Velocity and Oxygen Content [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(11): 1961-1983. |
| [7] | Bo Li, Yonghua Duan, Mengnie Li, Lishi Ma, Shanju Zheng, Mingjun Peng. First-Principles Calculations on Electronic Structure, Adhesion Strength, and Interfacial Stability of Mg(0001)/AlB2(0001) Nucleation Interface [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(10): 1752-1766. |
| [8] | Long Chen, Xintong Lian, Zhong Xi, Tengshi Liu, Qingxiao Feng, Hualong Li, Yixin Shi, Han Dong. A Study of Rust Layer of Ultra-Thin Cast Strip Steel Containing 0.10% Sb in Simulated Industrial Atmosphere [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(8): 1371-1384. |
| [9] | Zheng-Zheng Yin, Zhao-Qi Zhang, Xiu-Juan Tian, Zhen-Lin Wang, Rong-Chang Zeng. Corrosion Resistance and Durability of Superhydrophobic Coating on AZ31 Mg Alloy via One-Step Electrodeposition [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 25-38. |
| [10] | Lujun Zhou, Shanwu Yang, Yi Dong, Wenhua Zhang, Jianwen Ding, Guoliang Liu, Chengjia Shang, Raja Devesh Kumar Misra. Characterization of Compactness of Rust Layers on Weathering Steels by an Adsorption/Dehydration Test of Ethanol [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 846-856. |
| [11] | Jagdish Kaur, Ramneek Kaur, S. K. Tripathi. Silver Dopant-Induced Effect on Structural and Optoelectronic Properties of CdSe Thin Films [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(5): 541-549. |
| [12] | Kun Sheng, Li-Wei Lu, Yao Xiang, Min Ma, Zhong-Chang Wang. Microstructure and Mechanical Properties of AZ31 Mg Alloy Fabricated by Pre-compression and Frustum Shearing Extrusion [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(2): 235-244. |
| [13] | Lin Jiang, Liang Zhang, Zhi-Quan Liu. Optimal Design of Co/In/Cu Sputtering Target Assembly Using Finite Element Method and Taguchi Method [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(11): 1407-1414. |
| [14] | En-Yang Liu, Si-Rong Yu, Ming Yuan, Fan-Guo Li, Yan Zhao, Wei Xiong. Effects of Semi-solid Isothermal Heat Treatment on Microstructures and Damping Capacities of Fly Ash Cenosphere/AZ91D Composites [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(9): 953-962. |
| [15] | Yong-Jin Wang, Ren-Bo Song, Ren-Feng Song. Phase Transformation and Carbide Precipitation of Functional Gradient Semi-solid 9Cr18 Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(8): 823-830. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||
WeChat
