MICROSTRUCTURAL VARIATION AND FRACTURE MODES IN Al-Li ALLOYS

Search for articles:

Acta Metallurgica Sinica (English Letters) ›› 1989, Vol. 2 ›› Issue (1): 73-76.

• Research paper • Previous Articles Next Articles

MICROSTRUCTURAL VARIATION AND FRACTURE MODES IN Al-Li ALLOYS

SONG Shihong LI Xuzhi ZHANG Weibin Central-South University of Technology,Changsha,China SONG Shihong,Department of materials Science,Central-South University of Technology,Changsha,China

Received:1989-02-25 Revised:1989-02-25 Online:1989-02-25 Published:2009-10-10

Abstract

SONG Shihong LI Xuzhi ZHANG Weibin Central-South University of Technology,Changsha,China SONG Shihong,Department of materials Science,Central-South University of Technology,Changsha,China. MICROSTRUCTURAL VARIATION AND FRACTURE MODES IN Al-Li ALLOYS[J]. Acta Metallurgica Sinica (English Letters), 1989, 2(1): 73-76.

About journal

Authors and reviewers

Contact

WeChat

[1]	Peng Liu, Hongliang Liu, Jun Liu, Chaoyun Yang, Hang Liu, Chengwu Zheng, Yikun Luan, Mingguang Li, Dianzhong Li. Manipulating the texture configuration and formability of interstitial-free steels through low-oxygen rare earth addition [J]. Metals Advances, 2026, 40(2): 101-109.
[2]	B. M. Shi, Y. T. Pang, B. H. Shan, B. B. Wang, Y. Liu, P. Xue, J. F. Zhang, Y. N. Zan, Q. Z. Wang, B. L. Xiao, Z. Y. Ma. Microstructure Evolution and Fracture Behavior of (B₄C+Al₂O₃)/Al Friction Stir Welded Joints [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1513-1526.
[3]	Fengyi Wang, Jingyuan Ma, Jiahao Liu, Hongjun Ji, Hongtao Chen. Development of an Antioxidation Copper Paste with Self-Reducing Copper Formate and Molecular Dynamics Analysis of Sintering Mechanisms [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1351-1360.
[4]	Sen Ge, Ben Niu, Zhen-Hua Wang, Qian-Fu Pan, Chao-Hong Liu, Qing Wang. Recrystallization Behavior and Mechanical Property of a Medium-Si 12%Cr Reduced Activation Ferritic/Martensitic Steel Cladding Tube During the Manufacture [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1385-1396.
[5]	Yuxuan Li, Xi Zhao, Shuchang Li, Yihan Gao, Rui Guo. Precipitation Behavior and Strengthening and Toughening Mechanisms of Pre-fabricated Strong Basal Texture AZ80 + 0.4%Ce Alloy Under Room-Temperature Pre-deformation Coupled with Dual-Stage Aging Conditions [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1127-1144.
[6]	Wangjian Yu, Rui Hu, Guoqiang Shang, Xian Luo, Hong Wang. Correlation Mechanism Between Microstructure and Fatigue Crack Propagation Behavior of Ti-Mo-Cr-V-Nb-Al Titanium Alloys [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 981-1002.
[7]	Hongyang Zhang, Huihui Nie, Zhijian Li, Hongsheng Chen, Wei Liang, Liuwei Zheng. Evolution of Microstructure and Mechanical Properties of AZ31 Sheets with Different Initial Microstructures During the Corrugated Wide Limit Alignment Process [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 1012-1028.
[8]	Tianyi Zeng, Zirui Luo, Hao Chen, Wei Wang, Ke Yang. Flow Behavior and Dynamic Recrystallization Mechanism of CSS-42L Bearing Steel During Hot Compression Deformation [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 465-480.
[9]	Nafiseh Mollaei, Seyed Mahmood Fatemi, Mohammad Reza Aboutalebi, Seyed Hossein Razavi, Wiktor Bednarczyk. Microstructure, Texture, Mechanical Properties, and Corrosion Behavior of Biodegradable Zn-0.2Mg Alloy Processed by Multi-Directional Forging [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 507-525.
[10]	Xiangru Guo, Jian Zhang, Tieqiang Kong, Junjie Shen, Qingjian Liu, Chaoyang Sun, Peipei Li. Unraveling the Discontinuous Dynamic Recrystallization of the TC17 Titanium Alloy during Hot Deformation by Crystal Plasticity Modeling [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2243-2264.
[11]	Ming-Rong Fan, Tian-Yu Wang, Jing-Gang Suo, Ming-Kun Wang, Ying-Ying Feng, Zong-An Luo. Effect of Heat Treatment on Microstructure Evolution and Fracture Mechanism of 30CrMo/316L Multilayered Composites Fabricated by Vacuum Electron Beam Welding and Accumulative Hot Roll Bonding [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2265-2278.
[12]	Jiang Liu, Fengping Zhao, Wen Shi, Han Dong, Xiaofei Guo. Enhanced Hydrogen Embrittlement Resistance in a Vanadium-Alloyed 42CrNiMoV Steel for High-Strength Wind Turbine Bolts [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2300-2315.
[13]	Rashad A. Al-Hammadi, Rui Zhang, Chuanyong Cui, Xipeng Tao, Yizhou Zhou. Deformation Mechanism and Fracture Behavior of a Coarse-Grain Ni-Co-Based Superalloy During Superplasticity [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(11): 2024-2034.
[14]	Shaoqiang Ren, Qingshuang Ma, Chengxian Zhang, Liming Yu, Huijun Li, Hongtao Zhu, Qiuzhi Gao. Coarsening Behavior of L1₂-Ni₃Al Precipitates in Alumina-Forming Austenitic Steel [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(11): 2063-2076.
[15]	Fang-Fang Cao, Cui-Ju Wang, Kai-Bo Nie, Quan-Xin Shi, Yi-Jia Li, Kun-Kun Deng. Mechanical Properties and Work Hardening Behavior of Ti_p/Mg-Gd-Y-Zn Composites [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(10): 1777-1793.

MICROSTRUCTURAL VARIATION AND FRACTURE MODES IN Al-Li ALLOYS

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments