RELATIONSHIP BETWEEN M-A CONSTITUENT AND CLEAVAGE FRACTURE BEHAVIOUR OF GRANULAR BAINITIC WELD METAL

Abstract

Abstract: The cleavage fracture mechanism of granular bainitie weld metal in 15MnVN steel has been investigated.SEM observation of a special specimen for revealing simultaneously fracture sur- face and microstructure shows that the cleavage of the weld is initiated by M-A constituent. The 95th percentile equivalent diameter of M-A constituent controls the cleavage fracture stress of the weld metal.

Key words: granular bainite, M-A constituent, weld, cleavage fracture

XU Xiangxing SU Yi ZHOU Wei Tsinghua University,Beijing,ChinaCAI Qigong Central Iron and Steel Research Institute,Ministry of Metallurgical Industry,Beijing,China XU Xiangxing,Dept.of Mechanical Engineering,Tsinghua University,Beijing,100084,China. RELATIONSHIP BETWEEN M-A CONSTITUENT AND CLEAVAGE FRACTURE BEHAVIOUR OF GRANULAR BAINITIC WELD METAL[J]. Acta Metallurgica Sinica (English Letters), 1989, 2(2): 143-146.

[1]	Xinqi Ji, Yue Zhang, Wenhan Jin, Xin Qi. A strategy on the consistency of tensile strength of friction stir lap welding joint based on the same peak temperature [J]. Metals Advances, 2026, 40(2): 78-87.
[2]	B. M. Shi, Y. T. Pang, B. H. Shan, B. B. Wang, Y. Liu, P. Xue, J. F. Zhang, Y. N. Zan, Q. Z. Wang, B. L. Xiao, Z. Y. Ma. Microstructure Evolution and Fracture Behavior of (B₄C+Al₂O₃)/Al Friction Stir Welded Joints [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1513-1526.
[3]	F. S. Li, L. H. Wu, Y. Kan, H. B. Zhao, D. R. Ni, P. Xue, B. L. Xiao, Z. Y. Ma. Microstructure Evolution and Fracture Mechanisms in Electron Beam Welded Joint of Ti-6Al-4V ELI Alloy Ultra-thick Plates [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1317-1330.
[4]	Yunlu Jiang, Lihui Wu, Dingrui Ni, Hongbo Zhao, Xu Han, Peng Xue, Bolv Xiao, Zongyi Ma. Effect of Post Weld Heat Treatment on Residual Stress and Mechanical Properties of 106 mm Thick TC4 Titanium Alloy Electron Beam Welded Joints [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1083-1094.
[5]	Hao Zhang, Le Zai, Xiaohuai Xue. Enhancing the Mechanical Properties Induced by Ta Microalloying in TIG-Welded Ti₂AlNb-Based Intermetallic Alloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 419-434.
[6]	Chenghao Liu, Wenchao Dong, Jian Sun, Shanping Lu. Effect of Precipitation Behavior and Deformation Twinning Evolution on the Mechanical Properties of 16Cr-25.5Ni-4.2Mo Superaustenitic Stainless Steel Weld Metals [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(2): 338-352.
[7]	Yakui Chen, Shitong Wei, Dong Wu, Shanping Lu. Effects of Aging at 550 °C on α′-Martensitic Transformation of High Si-Bearing Metastable Austenitic Stainless Steel Weld Metal [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1467-1479.
[8]	Xue Li, Qingzhen Zhao, Hao Su, Ji Chen, Chuansong Wu. Intermetallic Compounds Formation in Dissimilar Friction Stir Welding of Mg/Cu Alloys [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1523-1532.
[9]	Dongqiqiong Wang, Qiang Wang, Xiaowu Li, Zhefeng Zhang. Improving Fatigue Properties of 316L Stainless Steel Welded Joints by Surface Spinning Strengthening [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(5): 840-854.
[10]	Peng Chen, Wenhao Chen, Jiaxin Chen, Zhiyu Chen, Yang Tang, Ge Liu, Bensheng Huang, Zhiqing Zhang. Microstructure Evolution and Mechanical Properties of Friction Stir Welded Al-Cu-Li Alloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(5): 855-871.
[11]	Yihao Gao, Boqiao Ren, Yunhao Chen, Xinchen Sui, Xiaohui Zhao, Chenglei Fan, Chao Chen. Improvement of Formation, Microstructure and Mechanical Properties of TIG Welded TC4 Titanium Alloy by Ultrasonic Coaxial Radiation [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(12): 2045-2056.
[12]	Xiaoguang Li, Jiatao Liu, Qing Liu, Chunbo Zhang, Hang Liang, Lei Cui, Yongchang Liu. High-Temperature Fatigue Behavior of Inertia Friction Welded Joints of GH4065A Ni-Based Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(11): 1935-1946.
[13]	Ke Qiao, Kuaishe Wang, Jia Wang, Zhengyang Hao, Kairui Xue, Jun Cai, Fengming Qiang, Wen Wang. Microstructure Evolution and Recrystallized Behavior of Friction Stir Welding Twin-Induced Plasticity Steel [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(11): 1947-1960.
[14]	H. Ashrafi, M. Shamanian, M. Sanayei, F. Farhadi, J.A. Szpunar. EBSD Characterization of Microstructure and Micro-texture in a Friction Stir-Welded DP600 Steel [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(5): 789-802.
[15]	Shude Ji, Xiao Cui, Lin Ma, Hua Liu, Yingying Zuo, Zhiqing Zhang. Achieving High-Quality Aluminum to Copper Dissimilar Metals Joint via Friction Stir Double-Riveting Welding [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(4): 552-572.

RELATIONSHIP BETWEEN M-A CONSTITUENT AND CLEAVAGE FRACTURE BEHAVIOUR OF GRANULAR BAINITIC WELD METAL

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments