SHOT-PEENING STRENGTHENED LAYER AND ITS EFFECT ON FATIGUE STRENGTH OF α-BRASS

Search for articles:

Acta Metallurgica Sinica (English Letters) ›› 1989, Vol. 2 ›› Issue (4): 293-297.

• Research paper • Previous Articles Next Articles

SHOT-PEENING STRENGTHENED LAYER AND ITS EFFECT ON FATIGUE STRENGTH OF α-BRASS

TAN Yuxu REN Liping LI Gang Xi'an Jiaotong University,Xi'an,China Institute of Metallic and Strength,Xi'an Jiaotong University,Xi'an,China

Received:1989-08-25 Revised:1989-08-25 Online:1989-08-25 Published:2009-10-10

Abstract

TAN Yuxu REN Liping LI Gang Xi'an Jiaotong University,Xi'an,China Institute of Metallic and Strength,Xi'an Jiaotong University,Xi'an,China. SHOT-PEENING STRENGTHENED LAYER AND ITS EFFECT ON FATIGUE STRENGTH OF α-BRASS[J]. Acta Metallurgica Sinica (English Letters), 1989, 2(4): 293-297.

References

Metrics

Comments

About journal

Authors and reviewers

Contact

WeChat

[1]	Mengyao He, Shuhui Hao, Huichao Duan, Rui Zhang, Chuanyong Cui, Kui Du. Deformation twinning in a wrought Ni-base superalloy at intermediate temperatures [J]. Metals Advances, 2026, 40(2): 71-77.
[2]	Huimin Yang, Kun Yang, Guobing Wei, Rongguang Li. Optimization of Surface Layer Properties of Mg-9Li-1Zn Alloy by Ultrasonic Surface Rolling Process and its Impact on Corrosion Behavior [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1421-1435.
[3]	Yunlu Jiang, Lihui Wu, Dingrui Ni, Hongbo Zhao, Xu Han, Peng Xue, Bolv Xiao, Zongyi Ma. Effect of Post Weld Heat Treatment on Residual Stress and Mechanical Properties of 106 mm Thick TC4 Titanium Alloy Electron Beam Welded Joints [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1083-1094.
[4]	Wangjian Yu, Rui Hu, Guoqiang Shang, Xian Luo, Hong Wang. Correlation Mechanism Between Microstructure and Fatigue Crack Propagation Behavior of Ti-Mo-Cr-V-Nb-Al Titanium Alloys [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 981-1002.
[5]	Shaolong Zhang, Wen Zhou, Feng Hu, Kaiming Wu, Serhii Yershov. Effect of Intercritical Annealing Prior to Quenching and Partitioning on Impact Abrasive Wear Properties of Medium-Manganese Steel [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 1041-1056.
[6]	X. X. Zhang, E. Walz, A. Langebeck, J. Rebelo Kornmeier, A. Kriele, V. Luzin, M. Adveev, A. Bohlen, M. Hofmann. Macroscopic and Microscopic Residual Stresses in Nickel-Aluminum Bronze Matrix Composite Surface Deposits Manufactured via Laser Melt Injection [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(4): 570-586.
[7]	Yifei Gao, Peng Zhang, Pan Ren, Yingfei Yang, Guofeng Han, Wenbo Du, Wei Li, Qiwei Wang. Effect of CeO₂ on the H₂O/NaCl-Induced Corrosion Behavior of Ni-Co Coating at 650 °C [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(4): 672-690.
[8]	Yiyun Guo, Lei Wu, Yibo Shang, Chengqi Sun. Effects of Defect, Mean Stress and Lower Loading on High Cycle and Very High Cycle Fatigue Behavior of Ti-6Al-4V Alloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 435-448.
[9]	Ang Yin, Wenbo Li, Chengxi Wang, Vincent Ji, Chuanhai Jiang. Microstructure Evolution and Residual Stress Redistribution in Selective Laser Melted TA15 Titanium Alloy Under Severe Shot Peening Treatment [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(11): 1953-1964.
[10]	Ali Kazemi Movahed, Reza Ghanavati, Abdollah Saboori, Luca Iuliano. A Review of Strategies for In Situ Mitigating of Residual Stress in Laser-Based Metal Additive Manufacturing: Insights, Innovations, and Challenges [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(10): 1657-1698.
[11]	Nanfu Li, Bin Wu, Jiazhen Wang, Ming Shu, Yusheng Zhang, Yifeng Li, Jianqiu Wang, En-Hou Han, Hongliang Ming. Corrosion Behavior of 304LN Stainless Steel in High-Temperature Supercritical Carbon Dioxide: Oxidation and Carburization [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(10): 1809-1826.
[12]	Zhen-Liang Li, Xin-Lei Zhang. Evolution of Deformation Substructure and Mg_xZn_yCa_z Metastable Phase in Fine-Grained Mg Alloys [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(1): 71-85.
[13]	Xue Han, Dan Zhang, Song Zhang, Mohammed R. I. Abueida, Lili Tan, Xiaopeng Lu, Qiang Wang, Huanye Liu. Fatigue and Corrosion Fatigue Properties of Mg-Zn-Zr-Nd Alloys in Glucose-Containing Simulated Body Fluids [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1533-1550.
[14]	Qiao-Sheng Xia, Dong-Peng Hua, Qing Zhou, Ye-Ran Shi, Xiang-Tao Deng, Kai-Ju Lu, Hai-Feng Wang, Xiu-Bing Liang, Zhao-Dong Wang. Atomic-Scale Insights into Damage Mechanisms of GGr15 Bearing Steel Under Cyclic Shear Fatigue [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(7): 1265-1278.
[15]	Fanchao Meng, Rui Zhang, Shuai Wang, Fengbo Sun, Run Chen, Lujun Huang, Lin Geng. Fatigue Crack Initiation and Propagation Dominated by Crystallographic Factors in TiB/near α-Ti Composite [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(5): 763-776.

SHOT-PEENING STRENGTHENED LAYER AND ITS EFFECT ON FATIGUE STRENGTH OF α-BRASS

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments