FRACTURE MECHANISM OF PRE-DEFORMATION-AGED Al-2.73Li ALLOY

Abstract

Abstract: The fracture mechanism of deformation-aged Al-Li alloy was approached by investigating the influence of prior cold deformation on the precipitation kinetics as well as the behaviours of work hardening and fracture for Al-2.73Li alloy.The experimental results show that the work hardening rate and the strength are increased and the ductility is decreased by prior cold deformation.The decrease in ductility is mainly due to the cell dislocaton substructure distrib- uted inhomogeneously and the hardening of precipitate free zones at grain boundaries caused by prior cold deformation.The failure mode in the alloy is a mixed integranular and transgranular one.The tendency of intergranular fracture is intensified through the deformation-aging.The mechanisms of intergranular failure in the alloy are different under various deformation-aging treatments.

Key words: Al-Li alloy, deformation-aging, precipitation, strengthening, fracture

SUN Dongli YANG Dezhuang LEI Tingquan CUI Yuexian Harbin Institute of Technology,Harbin,China Lecturer,Department of Metallic Materials and Technology,Harbin Institute of Technology,Harbin 150006,China. FRACTURE MECHANISM OF PRE-DEFORMATION-AGED Al-2.73Li ALLOY[J]. Acta Metallurgica Sinica (English Letters), 1990, 3(5): 357-363.

[1]	B. M. Shi, Y. T. Pang, B. H. Shan, B. B. Wang, Y. Liu, P. Xue, J. F. Zhang, Y. N. Zan, Q. Z. Wang, B. L. Xiao, Z. Y. Ma. Microstructure Evolution and Fracture Behavior of (B₄C+Al₂O₃)/Al Friction Stir Welded Joints [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(9): 1513-1526.
[2]	Sen Ge, Ben Niu, Zhen-Hua Wang, Qian-Fu Pan, Chao-Hong Liu, Qing Wang. Recrystallization Behavior and Mechanical Property of a Medium-Si 12%Cr Reduced Activation Ferritic/Martensitic Steel Cladding Tube During the Manufacture [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1385-1396.
[3]	Haoyu Cheng, Chenyang Hou, Jianlei Zhang, Xiaodong Mao, Yuanxiang Zhang, Yanyun Zhao, Chulun Shen, Changjiang Song. An Innovative Large-Scale Preparation Method for ODS Steel: Zone Melting with Built-In Precursor Powder [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1397-1409.
[4]	Yuxuan Li, Xi Zhao, Shuchang Li, Yihan Gao, Rui Guo. Precipitation Behavior and Strengthening and Toughening Mechanisms of Pre-fabricated Strong Basal Texture AZ80 + 0.4%Ce Alloy Under Room-Temperature Pre-deformation Coupled with Dual-Stage Aging Conditions [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1127-1144.
[5]	Wangjian Yu, Rui Hu, Guoqiang Shang, Xian Luo, Hong Wang. Correlation Mechanism Between Microstructure and Fatigue Crack Propagation Behavior of Ti-Mo-Cr-V-Nb-Al Titanium Alloys [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 981-1002.
[6]	Qi-Mei Tian, Fu Xiao, Ya Yang, Yuan-Biao Tan, Song Xiang, Xuan-Ming Ji, Fei Zhao, Hui Yang. Achieving an Extraordinary Strength-Ductility Synchronization in TA15 Titanium Alloy via Tailoring a Tri-modal Microstructure [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2228-2242.
[7]	Ming-Rong Fan, Tian-Yu Wang, Jing-Gang Suo, Ming-Kun Wang, Ying-Ying Feng, Zong-An Luo. Effect of Heat Treatment on Microstructure Evolution and Fracture Mechanism of 30CrMo/316L Multilayered Composites Fabricated by Vacuum Electron Beam Welding and Accumulative Hot Roll Bonding [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2265-2278.
[8]	Jiang Liu, Fengping Zhao, Wen Shi, Han Dong, Xiaofei Guo. Enhanced Hydrogen Embrittlement Resistance in a Vanadium-Alloyed 42CrNiMoV Steel for High-Strength Wind Turbine Bolts [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2300-2315.
[9]	Rashad A. Al-Hammadi, Rui Zhang, Chuanyong Cui, Xipeng Tao, Yizhou Zhou. Deformation Mechanism and Fracture Behavior of a Coarse-Grain Ni-Co-Based Superalloy During Superplasticity [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(11): 2024-2034.
[10]	Yuqi Liu, Feng Wang, Songyang Chen, Hui Wang, Zhiping Xiong, Khurram Yaqoob, Zhangwei Wang, Min Song. Thermal Stability and Strengthening Effect of Coherent Precipitates in a (FeCoNi)₉₂Al_2.5Ti_5.5 High Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1491-1500.
[11]	Ruoyu Liu, Wenshu Li, Xiayang Yu, Lanyi Liu, Bingfeng Wang. Mechanical Properties and Microstructure of the Shear Band Formed at Cryogenic Temperature in the NiCrFe Medium-Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(8): 1377-1386.
[12]	Ziyue Xu, Huan Liu, Luyao Li, Chao Sun, Xi Tan, Baishan Chen, Qiangsheng Dong, Yuna Wu, Jinghua Jiang, Jiang Ma. Effect of Room Temperature Ultrasonic Vibration Compression on the Microstructure Evolution and Mechanical Properties of AZ91 Alloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(7): 1135-1146.
[13]	Lan Zhang, Dao-Kui Xu, Bao-Jie Wang, Cui-Lan Lu, Shuo Wang, Xiang-Bo Xu, Dong-Liang Wang, Xin Lv, En-Hou Han. Mechanical Behavior and Failure Mechanism of an As-Extruded Mg-11wt%Y Alloy at Elevated Temperature [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(6): 969-981.
[14]	Guodong Song, Conghui Zhang, Yunchang Xin, Nobuhiro Tsuji, Xinde Huang, Bo Guan, Xiaomei He. Understanding the Mechanism for the In-Plane Yielding Anisotropy of a Hot-Rolled Zirconium Plate [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(6): 1066-1076.
[15]	Jinpeng Hu, Tao Sun, Fujun Cao, Yifu Shen, Zhiyuan Yang, Chan Guo. Enhanced Strength-Ductility Synergy in Submerged Friction Stir Processing ER2319 Alloy Manufactured by Wire-Arc Additive Manufacturing via Creating Ultrafine Microstructure [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(5): 793-807.

FRACTURE MECHANISM OF PRE-DEFORMATION-AGED Al-2.73Li ALLOY

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments