EFFECT OF HETEROGENEOUS DISTRIBUTION OF C AND ALLOYING ELEMENTS ON γ/α′ TRANSFORMATION IN A Fe-Mn-Cr-C ALLOY

Abstract

Abstract: The heterogeneous distribution of C and metallic alloying elements as well as the phase com- position changes before and after cold deformation of an Fe-Mn-Cr-C alloy have been stu- died by the use of Mssbauer spectroscopy.The austenites without and with C and metallic alloying elements are found in the alloy in as-solid solution state.While the martensites with- out and with C and alloying elements may be induced by cold deformation.The transforma- tion from austenite to martensite in the alloy is confirmed via theoretical computation and ex- periments to be controlled by the number of covalent electron pairs forming covalent bond in austenitic crystal cell of the alloy.The formation of strong covalent bond between C and me- tallic elements can vigorously retard the γ/α' transformation.

Key words: heterogeneity, solid solution, M(?)ssbauer spectroscopy, strain induced martensite, valence electron structure

ZHENG Yangzeng ZHANG Fucheng Yanshan University,Qinhuangdao,China. EFFECT OF HETEROGENEOUS DISTRIBUTION OF C AND ALLOYING ELEMENTS ON γ/α′ TRANSFORMATION IN A Fe-Mn-Cr-C ALLOY[J]. Acta Metallurgica Sinica (English Letters), 1991, 4(6): 467-470.

[1]	Chengwei Sun, Wang Li, Chengjun Li, Yingchao Wei, Wenyuan Ma, Xin Li, Qinghui Jiang, Yubo Luo, Junyou Yang. Thermoelectric Performance of CuInSe₂-ZnSe Solid Solution [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(5): 823-830.
[2]	Jun Zhang, Binhan Sun, Zhigang Yang, Chi Zhang, Hao Chen. Enhancing the Hydrogen Embrittlement Resistance of Medium Mn Steels by Designing Metastable Austenite with a Compositional Core-shell Structure [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(7): 1059-1077.
[3]	Shougang Duan, Qian Zhang, Wenxuan Li, Yong Dong, Beibei Jiang, Shichao Liu, Chuanqiang Li, Zhengrong Zhang. Effects of V Addition on Microstructural Evolution and Mechanical Properties of AlCrFe₂Ni₂ High-Entropy Alloys [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(3): 391-404.
[4]	Minbo Wang, Ruidi Li, Tiechui Yuan, Haiou Yang, Pengda Niu, Chao Chen. Microstructure and Mechanical Properties of Selective Laser Melted Al-2.51Mn-2.71Mg-0.55Sc-0.29Cu-0.31Zn Alloy Designed by Supersaturated Solid Solution [J]. Acta Metallurgica Sinica (English Letters), 2022, 35(3): 354-368.
[5]	Chunni Jia, Gang Shen, Wenxiong Chen, Baojia Hu, Chengwu Zheng, Dianzhong Li. Mesoscopic Analysis of Deformation Heterogeneity and Recrystallization Microstructures of a Dual-Phase Steel Using a Coupled Simulation Approach [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(6): 777-788.
[6]	Fushi Jiang, Chang Pang, Zhaoyang Zheng, Qing Wang, Jijun Zhao, Chuang Dong. First-Principles Calculations for Stable β-Ti-Mo Alloys Using Cluster-Plus-Glue-Atom Model [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 968-974.
[7]	Zhi-Wei Lai, Zhe-Yuan Huang, Chuan Pan, Hui-Qiao Du, Xiao-Guang Chen, Lei Liu, Wei-Ming Long, Gui-Sheng Zou. Rapid Ultrasonic-Assisted Soldering of AZ31B Mg Alloy/6061 Al Alloy with Low-Melting-Point Sn-xZn Solders Without Flux in Air [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(3): 332-342.
[8]	Chong-Feng Sun, Sheng-Qi Xi, Yue Zhang, Xiao-Xue Zheng, Jing-En Zhou. Thermodynamic Characteristic and Phase Evolution in Immiscible Cr-Mo Binary Alloys [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(8): 1074-1081.
[9]	Dongping TAO. Estimation of component activities in some oxide solid solutions by the molecular interaction vacancy model [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(6): 432-442.
[10]	Tingdong ZHOU, Zhengyun WANG, Jiangkang TANG, Haipeng LU. Structure and magnetic properties of Fe-based powders prepared by mechanical alloying [J]. Acta Metallurgica Sinica (English Letters), 2010, 23(5): 351-356.
[11]	Shuhua LIANG,Xianhui WANG,Liang FANG,Zhikang FAN. Relationship between powder characteristic and internal oxidation of Al in Cu-Al pre-alloyed powders [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(1): 71-80.
[12]	Y.Z. Zhao*, Q. Gao , Y.C. Liu. CALCULATION OF THE DAMPING OF THE Zn-27Al ALLOY BASED ON THE MICRO INTERFACE SLIDING MODEL [J]. Acta Metallurgica Sinica (English Letters), 2006, 19(3): 228-234 .
[13]	Y.Z. Yang, X.J. Bai, T.C. Kuang. EXAFS STUDY OF THE SHORT RANGE STRUCTURE OF NANOCRYSTALLINE BCC-Fe80Cu20 SOLID SOLUTION [J]. Acta Metallurgica Sinica (English Letters), 2002, 15(3): 307-311 .
[14]	J.M Hu; J.X. Wu; H.M Meng; YR. Zhu; D.B. Sun and D.J. Yang(Beijing Corrosion and Protection Center, Open Laboratory of Corrosion, Erosion and Surface Technology,University of Science and Technology Beijing, Beijing 100083, China). INVESTIGATION OF SURFACE MORPHOLOGY, STRUCTURE AND ELECTROCATALYTIC PROPERTIES FOR O_2 EVOLUTION OF TITANIUM BASED IrO_2+Ta_2O_5 COATINGS [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(3): 849-856.
[15]	Y.M.Wang and L.X.Ding Department of material, School of Mechanical Engineering, Shenyang University, Shenyang 110044, China. IINFLUENCE OF HEAT TREATMENT TECHNOLOGY ON PROPERTY OF LOW COBALT Fe Cr Co PERMANENT MAGNETIC ALLOY [J]. Acta Metallurgica Sinica (English Letters), 1999, 12(5): 911-916.

EFFECT OF HETEROGENEOUS DISTRIBUTION OF C AND ALLOYING ELEMENTS ON γ/α′ TRANSFORMATION IN A Fe-Mn-Cr-C ALLOY

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments