HARDENING BEHAVIOUR OF STAINLESS STEEL 316 DURING FATIGUE WITH THERMAL PULSE

Abstract

Abstract: The softening of stainless steel 316 of non-detectable difference in magnitude induced by thermal pulse was found during fatigue with strain amplitude of 1.17×10~(-4) in temperature range of 333—573K.And it occurred if the measurements of fatigue with thermal pulse were performed in range of 333—503K.However,it will become of the hardening in range of 503 —573K.The temperature,at which hardening of the steel induced by thermal pulse emerges in fatigue process,increases with the increasing in strain amplitudes.

Key words: fatigue, hardening, softening, thermal pulse, stainless steel

YAN Shichun Institute of Solid State Physics,Academia Sinica,Hefei,ChinaOKUDA Shigeo MIZUBA YASHI Haka Institute of Materials Science,University of Tsukuba,Japan. HARDENING BEHAVIOUR OF STAINLESS STEEL 316 DURING FATIGUE WITH THERMAL PULSE[J]. Acta Metallurgica Sinica (English Letters), 1992, 5(4): 301-304.

[1]	Zheng-Hong Liu, Ying Han, Jia-Peng Sun, Ming-Kun Jiang, Ying Song, Guo-Qing Zu, Xu Ran. A Novel Cu-Modified 20Cr Lean Duplex Stainless Steel with Exceptional Combination of Mechanical Properties and Corrosion Resistance [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1361-1370.
[2]	Yuntian Lou, Shengyu He, Xudong Chen, Weiwei Chang, Hao Zhang, Jingzhi Yang, Hongchang Qian, Dawei Zhang. Effect of Ultrasonic Shot Peening on the Corrosion Resistance and Antibacterial Properties of 304 Cu-Bearing Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(8): 1371-1384.
[3]	Li Zhao, Tian-Yu Cui, Wei-Wei Chang, Hong-Chang Qian, Yun-Tian Lou, Jing-Zhi Yang, Da-Wei Zhang. Effect of Mineralization Induced by Shewanella algae on Passive Film of Stainless Steel via FIB-SEM/TEM and EELS [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 877-888.
[4]	Wangjian Yu, Rui Hu, Guoqiang Shang, Xian Luo, Hong Wang. Correlation Mechanism Between Microstructure and Fatigue Crack Propagation Behavior of Ti-Mo-Cr-V-Nb-Al Titanium Alloys [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 981-1002.
[5]	Shaolong Zhang, Wen Zhou, Feng Hu, Kaiming Wu, Serhii Yershov. Effect of Intercritical Annealing Prior to Quenching and Partitioning on Impact Abrasive Wear Properties of Medium-Manganese Steel [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(6): 1041-1056.
[6]	Yifan Li, Shengyao Ma, Xinrui Zhang, Tong Xi, Chunguang Yang, Hanyu Zhao, Ke Yang. Copper Precipitation Behavior and Mechanical Properties of Cu-Bearing Ferritic Stainless Steel with Different Cr Addition [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 383-395.
[7]	Yiyun Guo, Lei Wu, Yibo Shang, Chengqi Sun. Effects of Defect, Mean Stress and Lower Loading on High Cycle and Very High Cycle Fatigue Behavior of Ti-6Al-4V Alloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(3): 435-448.
[8]	Chenghao Liu, Wenchao Dong, Jian Sun, Shanping Lu. Effect of Precipitation Behavior and Deformation Twinning Evolution on the Mechanical Properties of 16Cr-25.5Ni-4.2Mo Superaustenitic Stainless Steel Weld Metals [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(2): 338-352.
[9]	Yiran Xiong, Ziyu Zhang, Xinqiang Wu, Jibo Tan, Xiang Wang. Dissolution Behaviors of Corrosion Products on 316LN Stainless Steel in Simulated Shutdown Acid-Reducing Water Chemistry [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2289-2299.
[10]	Chong Gao, Zi-Hao Chen, Zhi-Zhi Liang, Li-Xi Xiong, Jian-Chao Pang, Heng Ma, Kang He, Shou-Xin Li, Xiao-Wu Li, Zhe-Feng Zhang. Effect of Heterogeneous Microstructural Morphology on Tensile Behavior in a Series of High-Strength Wind Power Steels [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(11): 2047-2062.
[11]	Z. Q. Wang, J. X. Yan, H. Z. Liu, X. G. Wang, Z. J. Zhang, Z. F. Zhang. Improving Tensile Strength and Ductility of Medium-Entropy Alloy via Three Principles of Composition Design [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(10): 1735-1741.
[12]	Fang-Fang Cao, Cui-Ju Wang, Kai-Bo Nie, Quan-Xin Shi, Yi-Jia Li, Kun-Kun Deng. Mechanical Properties and Work Hardening Behavior of Ti_p/Mg-Gd-Y-Zn Composites [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(10): 1777-1793.
[13]	Yakui Chen, Shitong Wei, Dong Wu, Shanping Lu. Effects of Aging at 550 °C on α′-Martensitic Transformation of High Si-Bearing Metastable Austenitic Stainless Steel Weld Metal [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1467-1479.
[14]	Yuqi Liu, Feng Wang, Songyang Chen, Hui Wang, Zhiping Xiong, Khurram Yaqoob, Zhangwei Wang, Min Song. Thermal Stability and Strengthening Effect of Coherent Precipitates in a (FeCoNi)₉₂Al_2.5Ti_5.5 High Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1491-1500.
[15]	Xue Han, Dan Zhang, Song Zhang, Mohammed R. I. Abueida, Lili Tan, Xiaopeng Lu, Qiang Wang, Huanye Liu. Fatigue and Corrosion Fatigue Properties of Mg-Zn-Zr-Nd Alloys in Glucose-Containing Simulated Body Fluids [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1533-1550.

HARDENING BEHAVIOUR OF STAINLESS STEEL 316 DURING FATIGUE WITH THERMAL PULSE

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments