CARBIDE PRECIPITATION AND BAINITE TRANSFORMATION IN Fe-C-Si ALLOY

Abstract

Abstract: The upper bainite formed isothermally at 480℃ C in Fe-0. 38C-1. 73Si alloy was studied by using transmission electron microscopy (TEM). It was found by electron diffraction and crystallographic analysis that bainitic carbide precipitation originated from bainitic ferrite (BF), in which the initial supersaturation did not come up to the average carbon content of the alloy. It is suggested that bainite transformation in steel should be a coupled process of transformation dislocation movement controlled by carbon diffusion in austenite.

Key words: bainite, carbide, shear, dislocation

R.L. Zuo; L. Fang and P. D. Ding(Department of Metallurgy and Materials Engineering, Chongqing University, Chongqing 630044, China). CARBIDE PRECIPITATION AND BAINITE TRANSFORMATION IN Fe-C-Si ALLOY[J]. Acta Metallurgica Sinica (English Letters), 1996, 9(5): 373-378.

[1]	Yuxuan Li, Xi Zhao, Shuchang Li, Yihan Gao, Rui Guo. Precipitation Behavior and Strengthening and Toughening Mechanisms of Pre-fabricated Strong Basal Texture AZ80 + 0.4%Ce Alloy Under Room-Temperature Pre-deformation Coupled with Dual-Stage Aging Conditions [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1127-1144.
[2]	Ran Ni, Shen Hua, Huashen Liu, Saijun Huang, Ying Zeng, Yanqin Chai, Hao Zhou, Jiang Zheng, Dongdi Yin. Statistical Study of Activity and Hall-Petch Coefficients for Individual Slip Modes in Basal-Textured Pure Mg [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1145-1156.
[3]	Zhongxue Wang, Le Ren, Yating Zhang, Mengcheng Zhou, Xinfang Zhang. Realizing Ultra-fast Spheroidization of GCr15 Bearing Steel by Analyzing the Correlation of Carbide Dissolution Law and Pulsed Electric Current Parameters Through Machine Learning [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1207-1218.
[4]	Mengjun Chen, Tingping Hou, Shi Cheng, Feng Hu, Tao Yu, Xianming Pan, Yuanyuan Li, Kaiming Wu. A Comprehensive Exploration of the Relationship between Microstructure Optimization and Strength Enhancement in Low-Density 5Al-5Mn Steel [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1219-1236.
[5]	Hanqiang Liu, Xing Li, Jibo Su, Chaoyun Yang, Yikun Luan, Dianzhong Li. Pitting Corrosion Behaviour in 9Cr18 Bearing Steel Under Salt Spray Environment [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(7): 1237-1245.
[6]	X. X. Zhang, E. Walz, A. Langebeck, J. Rebelo Kornmeier, A. Kriele, V. Luzin, M. Adveev, A. Bohlen, M. Hofmann. Macroscopic and Microscopic Residual Stresses in Nickel-Aluminum Bronze Matrix Composite Surface Deposits Manufactured via Laser Melt Injection [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(4): 570-586.
[7]	Chenghao Liu, Wenchao Dong, Jian Sun, Shanping Lu. Effect of Precipitation Behavior and Deformation Twinning Evolution on the Mechanical Properties of 16Cr-25.5Ni-4.2Mo Superaustenitic Stainless Steel Weld Metals [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(2): 338-352.
[8]	Yongchao Gai, Rui Zhang, Fuqiang Wang, Zijian Zhou, Xipeng Tao, Shaomin Lyu, Xingfei Xie, Chuanyong Cui, Jinglong Qu, Tianyu Zhu. Effect of Vanadium Element on Creep Behavior and Microstructure Evolution of a High Strength Ni-Based Wrought Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2102-2114.
[9]	Xiangru Guo, Jian Zhang, Tieqiang Kong, Junjie Shen, Qingjian Liu, Chaoyang Sun, Peipei Li. Unraveling the Discontinuous Dynamic Recrystallization of the TC17 Titanium Alloy during Hot Deformation by Crystal Plasticity Modeling [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2243-2264.
[10]	Yu Liu, Jinglian Du, Jianwei Xiao, Haotian Xue, Kexing Song, Feng Liu. Insights into Temperature and Strain Rate Dependent Deformation Behaviors of BCC Fe from Discrete Dislocation Dynamics Simulations [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(12): 2279-2288.
[11]	Han Wang, Shijie Sun, Naicheng Sheng, Guichen Hou, Jinguo Li, Yizhou Zhou, Xiaofeng Sun. Effect of Carbon on the Microstructures and Stress Rupture Properties of a Polycrystalline Ni-Based Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2025, 38(1): 151-163.
[12]	Z. C. Meng, K. G. Wang, T. Ali, D. Li, C. G. Bai, D. S. Xu, S. J. Li, A. H. Feng, G. J. Cao, J. H. Yao, Q. B. Fan, H. Wang, R. Yang. Atomistic Investigation of Shock-Induced Amorphization within Micro-shear Bands in Hexagonal Close-Packed Titanium [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(9): 1590-1600.
[13]	Ruoyu Liu, Wenshu Li, Xiayang Yu, Lanyi Liu, Bingfeng Wang. Mechanical Properties and Microstructure of the Shear Band Formed at Cryogenic Temperature in the NiCrFe Medium-Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(8): 1377-1386.
[14]	Ziyue Xu, Huan Liu, Luyao Li, Chao Sun, Xi Tan, Baishan Chen, Qiangsheng Dong, Yuna Wu, Jinghua Jiang, Jiang Ma. Effect of Room Temperature Ultrasonic Vibration Compression on the Microstructure Evolution and Mechanical Properties of AZ91 Alloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(7): 1135-1146.
[15]	Qiao-Sheng Xia, Dong-Peng Hua, Qing Zhou, Ye-Ran Shi, Xiang-Tao Deng, Kai-Ju Lu, Hai-Feng Wang, Xiu-Bing Liang, Zhao-Dong Wang. Atomic-Scale Insights into Damage Mechanisms of GGr15 Bearing Steel Under Cyclic Shear Fatigue [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(7): 1265-1278.

CARBIDE PRECIPITATION AND BAINITE TRANSFORMATION IN Fe-C-Si ALLOY

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments