Acta Metallurgica Sinica (English Letters) ›› 2004, Vol. 17 ›› Issue (2): 199-204 .

• 论文 • 上一篇    下一篇

Formation and Change of AuSn4 Compounds at Interface Between PBGA Solder Ball and Au/Ni/Cu Metallization During Laser and Infrared Reflow Soldering

Y.H. Tian and C.Q. Wang   

  1. 哈尔滨工业大学
  • 收稿日期:2003-05-30 修回日期:2003-08-28 出版日期:2004-04-25 发布日期:2009-10-10

Formation and Change of AuSn4 Compounds at Interface Between PBGA Solder Ball and Au/Ni/Cu Metallization During Laser and Infrared Reflow Soldering

Y.H. Tian and C.Q. Wang   

  1. State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology
  • Received:2003-05-30 Revised:2003-08-28 Online:2004-04-25 Published:2009-10-10

PDF (PC)

1600

Abstract: Interactions between 63Sn37Pb solder and PBGA metallization (Au/Ni/Cu) during laser and infrared reflow soldering were studied. During laser reflow soldering process, a thin layer of AuSn4 was observed at the interface of the solder bumps, its morphology was strongly dependent on the laser reflow power and heating time. The solder bumps formed by the first laser reflow was reflowed again to form the solder joints. The AuSn4 compounds formed in the first laser reflow process dissolved into the bulk solder after the secondary infrared reflow process. The needle-like AuSn4 changed into rod-like, and distributed inside the solder near the solder/pad interface.

Key words: laser reflow, infrared reflow, bump's microstructure,